EN 14488-3:2006

Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

This part of European Standard specifies a method for the determination of the flexural (first peak, ultimate and residual) strength of beam specimens of hardened sprayed concrete.

Prüfung von Spritzbeton - Teil 3: Biegefestigkeiten (Erstriss-, Biegezug- und Restfestigkeit) von faserverstärkten balkenförmigen Betonprüfkörpern

Dieser Teil der Europäischen Norm legt ein Verfahren zur Bestimmung der Biegefestigkeiten (bei Höchstlast, Bruchfestigkeit und Restfestigkeit) von Balken aus faserbewehrtem Spritzbeton fest.

Essais pour béton projeté - Partie 3 : Résistances à la flexion (au premier pic, ultime et résiduelle) d'éprouvettes parallélépipèdiques en béton renforcé par des fibres

La présente partie de cette Norme européenne prescrit une méthode de détermination de la résistance à la
flexion (au premier pic, ultime et résiduelle) d’éprouvettes parallélépipédiques en béton projeté durci.

Preskušanje brizganega betona – 3. del: Upogibna trdnost (prvi vrh, končna in preostala) armiranih vlaken za vzorce nosilcev

General Information

• Status: Withdrawn
• Publication Date: 18-Apr-2006
• Withdrawal Date: 31-Oct-2023
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/WG 10 - Sprayed concrete
• Ref Project: SIST EN 14488-3:2006 - Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

Relations

• Replaced By: EN 14488-3:2023 - Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
• Effective Date: 27-Jun-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimensEssais pour béton projeté - Partie 3 : Résistances a la flexion (au premier pic, ultime et résiduelle) d'éprouvettes parallélépipediques en béton renforcé par des fibresPrüfung von Spritzbeton - Teil 3: Biegefestigkeiten (Erstriss-, Biegezug- und Restfestigkeit) von faserverstärkten balkenförmigen BetonprüfkörpernTa slovenski standard je istoveten z:EN 14488-3:2006SIST EN 14488-3:2006en91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SLOVENSKI
STANDARDSIST EN 14488-3:200601-oktober-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14488-3April 2006ICS 91.100.30 English VersionTesting sprayed concrete - Part 3: Flexural strengths (first peak,ultimate and residual) of fibre reinforced beam specimensEssais pour béton projeté - Partie 3 : Résistances à laflexion (au premier pic, ultime et résiduelle) d'éprouvettesparallélépipèdiques en béton renforcé par des fibresPrüfung von Spritzbeton - Teil 3: Biegefestigkeiten(Erstriss-, Biegezug- und Restfestigkeit) faserverstärktenbalkenförmigen BetonprüfkörpernThis European Standard was approved by CEN on 27 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14488-3:2006: E



EN 14488-3:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Apparatus.4 4.1 Testing machine.4 4.2 Force application.5 4.3 Deflection measurement and control.6 5 Test specimen.7 5.1 General.7 5.2 Adjustment of test specimens.7 6 Procedures.8 6.1 Preparation and positioning of specimens.8 6.2 Loading.8 7 Expression of results.8 7.1 First peak and ultimate flexural strengths.
...