EN 14488-1:2005

Testing sprayed concrete - Sampling fresh and hardened concrete

This European Standard specifies a method for obtaining samples of fresh or hardened (i.e. before or after set) sprayed concrete, depending on the property to be measured and its associated test method.

Prüfung von Spritzbeton - Teil 1: Probenahme von Frisch- und Festbeton

Diese Europäische Norm legt ein Verfahren zur Gewinnung von Proben aus frischem oder festem Spritzbeton fest (d. h. vor oder nach dem Abbinden), das von der zu bestimmenden Eigenschaft und ihrem zugehörigen Prüfverfahren abhängt.

Essais pour béton projeté - Échantillonnage de béton frais et de béton durci

La présente norme européenne spécifie une méthode permettant d�obtenir des échantillons de mortier/béton
frais ou durci (c�est-à-dire avant et après prise), en fonction de la propriété à mesurer et de la méthode d'essai
qui y est associée.

Preskušanje brizganega betona – 1. del: Vzorčenje svežega in strjenega betona

General Information

• Status: Published
• Publication Date: 31-May-2005
• Withdrawal Date: 30-Dec-2007
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/WG 10 - Sprayed concrete
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 17-Sep-2010
• Completion Date: 17-Sep-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 14488-1:2005 - Testing sprayed concrete - Sampling fresh and hardened concrete

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2005
Preskušanje brizganega betona – 1. del: Vzorčenje svežega in strjenega betona
Testing sprayed concrete - Sampling fresh and hardened concrete
Prüfung von Spritzbeton - Teil 1: Probenahme von Frisch- und Festbeton
Essais pour béton projeté - Échantillonnage de béton frais et de béton durci
Ta slovenski standard je istoveten z: EN 14488-1:2005
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 14488-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 91.100.30
English version
Testing sprayed concrete - Sampling fresh and hardened
concrete
Essais pour béton projeté - Échantillonnage de béton frais Prüfung von Spritzbeton - Probenahme von Frisch- und
et de béton durci Festbeton
This European Standard was approved by CEN on 17 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14488-1:2005: E
worldwide for CEN national Members.

Contents page
1 Scope .4
2 Normative references .4
3 Principle.4
4 Apparatus .4
5 Procedures .4
6 Identification of sample .6
Bibliography.7

Foreword
This document (EN 14488-1:2005) has been prepared by Technical Committee CEN/TC 104 “Concrete and
related products”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn
at the latest by December 2007.
This European Standard is part of a series concerned with testing sprayed concrete.
This series EN 14488 Testing sprayed concrete includes the following parts:
 Part 1: Sampling fresh and hardened concrete
 Part 2: Compressive strength of young sprayed concrete
 Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
 Part 4: Bond strength of cores by direct tension
 Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
 Part 6: Thickness of concrete on a substrate
 Part 7: Fibre content of fibre reinforced concrete
This part does not supersede any other European Standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
1 Scope
This European Standard specifies a method for obtaining samples of fresh or hardened (i.e. before or after
set) sprayed
...