EN 14497:2004

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability

This document describes a test method to determine the filtration stability of cementitious injection products. This test can also be used:
to check the filtration stability and workable time in situ with the used mixing equipment, mixing time and temperature.
for assessment of mixing stability and required mixing time, with the mixing equipment used.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Eindringstabilität

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Eindringstabilität von zementartigen Rissfüllstoffen.

Produits et systèmes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de la stabilité de filtration

Le présent document décrit une méthode d'essai pour la détermination de la stabilité de filtration des produits d'injection à base de ciment. Cet essai peut aussi être utilisé :
-   pour vérifier la stabilité de filtration et le temps d'utilisation in situ, avec le matériel de mélange, le temps de mélange et la température de mélange utilisés ;
pour évaluer la stabilité du mélange et le temps de mélange nécessaire, avec le matériel de mélange utilisé.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Preskusne metode – Določevanje stabilnosti filtracije

General Information

• Status: Published
• Publication Date: 14-Sep-2004
• Withdrawal Date: 30-Mar-2004
• ICS: 91.080.40 - Concrete structures
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 8/WG 4 - Injection products
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 13-Nov-2020
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 14497:2004 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability

Relations

• Corrected By: EN 14497:2004/AC:2006 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der EindringstabilitätProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de la stabilité de filtrationProducts and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 14497:2004SIST EN 14497:2004en01-december-2004SIST EN 14497:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14497September 2004ICS 91.080.40 English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of the filtrationstabilityProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Détermination dela stabilité de filtrationProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der EindringstabilitätThis European Standard was approved by CEN on 16 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14497:2004: ESIST EN 14497:2004

EN 14497: 2004 (E) 3 Foreword This document (EN 14497:2004) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. It has been drafted by Sub-Committee 8 "Products and systems for the protection and repair of concrete structures" (Secretariat AFNOR). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14497:2004

to check the filtration stability and workable time in situ with the used mixing equipment, mixing time and temperature. 
for assessment of mixing stability and required mixing time, with the mixing equipment used.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1504-1:1998, Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 1: Definitions. prEN 1504-5:2001, P
...