iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 4877-001:2024

(Main)

Aerospace series - Filler metals for welding - Part 001: Technical specification

Aerospace series - Filler metals for welding - Part 001: Technical specification

This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of all forms of filler metal. It is presupposed to be applied when referred to and in conjunction with the product procurement specification unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Schweißzusätze - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Métaux d'apport de soudage - Partie 001 : Spécification technique

Le présent document spécifie les exigences relatives aux commandes, à la fabrication, aux essais, aux contrôles et à la livraison de toutes les formes de métal d’apport. Il est supposé être appliqué lorsqu'il est cité en référence et conjointement avec la spécification d’approvisionnement du produit, sauf spécification contraire figurant sur le dessin, la commande ou la fiche d'essais.

Aeronavtika - Kovinsko polnilo za varjenje - 001. del: Tehnična specifikacija

General Information

Status
Published
Publication Date
16-Apr-2024
ICS
25.160.20 - Welding consumables
49.025.10 - Steels
49.025.15 - Non-ferrous alloys in general
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 4/S 4 - Welding / Brazing
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-Apr-2024
Completion Date
17-Apr-2024
Ref Project
SIST EN 4877-001:2024 - Aerospace series - Filler metals for welding - Part 001: Technical specification

Relations

Replaces
EN 3879:2023 - Aerospace series - Metallic materials - Filler metal for welding - Technical specification
Effective Date
07-Jun-2023

Buy Standard

EN 4877-001:2024EN 4877-001:2024
PreviousNext
Standard
EN 4877-001:2024
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4877-001:2024
01-julij-2024
Aeronavtika - Kovinsko polnilo za varjenje - 001. del: Tehnična specifikacija
Aerospace series - Filler metals for welding - Part 001: Technical specification
Luft- und Raumfahrt - Schweißzusätze - Teil 001: Technische Lieferbedingungen
Série aérospatiale - Métaux d'apport de soudage - Partie 001 : Spécification technique
Ta slovenski standard je istoveten z: EN 4877-001:2024
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
49.025.05 Železove zlitine na splošno Ferrous alloys in general
SIST EN 4877-001:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4877-001:2024

---------------------- Page: 2 ----------------------
SIST EN 4877-001:2024


EN 4877-001
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2024
EUROPÄISCHE NORM
ICS 25.160.20; 49.025.10; 49.025.15 Supersedes EN 3879:2023
English Version

Aerospace series - Filler metals for welding - Part 001:
Technical specification
Série aérospatiale - Métaux d'apport de soudage - Luft- und Raumfahrt - Schweißzusätze - Teil 001:
Partie 001 : Spécification technique Technische Lieferbedingungen
This European Standard was approved by CEN on 8 January 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4877-001:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4877-001:2024
EN 4877-001:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Wording of order . 7
5 Health and safety . 7
6 List of authorized filler metals . 8
7 Technical requirements . 8
7.1 General. 8
7.2 Supply . 8
7.2.1 Agreement . 8
7.2.2 Freezing the production operation sheets .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
prEN 4877-001(Main)
Aerospace series - Filler metals for welding - Part 001: Technical specification
oSIST prEN 4877-001:2022
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 4877-001(Main)
Aerospace series - Filler metals for welding - Part 001: Technical specification
oSIST prEN 4877-001:2022
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3677:2024(Main)
Filler metal for brazing - Designation (ISO 3677:2024)
oSIST prEN ISO 3677:2023

This document specifies designations for filler materials for brazing on the basis of their chemical composition. The designation includes their solidus/liquidus temperatures. This document applies to the metallic part of filler materials used in brazing products, for example foils, wires, rods, pastes, flux-coated rods or wires and flux-cored rods or wires.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18563-3:2024(Main)
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Complete systems (ISO 18563-3:2024)
SIST EN ISO 18563-3:2024

This document addresses ultrasonic test systems implementing array probes, for contact technique (with or without wedge) or for immersion technique, with centre frequencies in the range of 0,5 MHz to 10 MHz.
This document provides methods and acceptance criteria for determining the compliance of the complete system (see 3.2). Its purpose is for the verification of the correct operation of the system prior to testing or verification of the absence of degradation of the system.
The methods are not intended to prove the suitability of the system for particular applications but are intended to prove the capability of the complete system (used for an application) to operate correctly according to the settings used. Tests can be performed on individual ultrasonic beams (for phased array technique, see 9.4.4) or on resulting images (for phased array technique and total focusing technique, see 9.4.3).
The tests can be limited to the functions that are intended to be used for a certain application.
This document does not cover the sensitivity setting of the system for a specific application. Nor does it apply to the characterization or verification of the mechanical scanning equipment. It is intended that these items will be covered by the test procedure.
This document does not address the phased array technique using tandem technique.
The characterization of beams, as recommended in case of dead elements or for more in-depth knowledge of the beams, is presented in Annex A. It is not applicable for signal processing technology using arrays.
NOTE            Unless stated otherwise, in this document ‘TFM’ and ‘TFM technique’ refer to the total focusing technique as defined in ISO 23243, and to related techniques, see for example ISO 23865 and ISO 23234.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12255-8:2024(Main)
Wastewater treatment plants - Part 8: Sludge treatment and storage
SIST EN 12255-8:2024

This document specifies design principles and performance requirements for sludge treatment and storage facilities at wastewater treatment plants serving more than 50 PT.
Guidance on operation is provided where it is necessary in order to facilitate the design of control and automation and design access to points of operation.
NOTE   Other sludges and organic wastes can be treated together with municipal sewage sludge where national and local regulations permit.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21265:2024(Main)
Building and civil engineering sealants - Assessment of the fungal growth on sealant surfaces (ISO 21265:2021)
SIST EN ISO 21265:2024

This document specifies a method for the evaluation of the fungal growth on sealants which are used in joints in building construction.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23611-2:2024(Main)
Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) (ISO 23611-2:2024)
kSIST FprEN ISO 23611-2:2024

This document specifies a method for sampling, extracting and preserving collembolans and mites from field soils as a prerequisite for using these animals as bio-indicators (e.g. to assess the quality of a soil as a habitat for organisms).
The sampling and extraction methods of this document are applicable to almost all types of soils. Exceptions can be soils from extreme climatic conditions (hard, frozen or flooded soils) and other matrices than soil, e.g. tree trunks, plants or lichens.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 1404:2024(Main)
Test gases - Determination of emissions from appliances burning gaseous fuels during type-testing
kSIST-TP FprCEN/TR 1404:2023

This document covers the measurements of the emissions of carbon monoxide (CO) and nitrogen oxides (NOX) produced by the combustion of gaseous fuel in domestic appliances. It is also possible to adapt it to liquid fuel appliances.
It explains how to correct the measured values obtained at the testing conditions of temperature, humidity and gas used into the reference conditions, as well as their conversion to different aeration factor expressed as %O2 in the dry products of combustion.
The document also contains information on the types of sampling probes, mainly their form and their dimensions, which depend on the type of flue gas system.
It also gives detailed information on the sampling of the flue gas to be analysed, the transport / transfer lines and their components, and the materials recommended for their construction.
This document contains hints on the calculation of the uncertainties and the parameters to be considered in the whole analysis chain from the sampling probe to the analysers including the calibration gases.
The calculation of the uncertainties of the measurements of NOX and CO is not covered by this document.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23766:2024(Main)
Thermal insulating products for industrial installations - Determination of the coefficient of linear thermal expansion at sub-ambient temperatures (ISO 23766:2022)
SIST EN ISO 23766:2024

This document specifies the equipment and procedures for determining the coefficient of linear thermal expansion at sub-ambient temperatures (−196 °C to 25 °C), subject to the possible temperature limitation of the test specimens. It is not applicable to products which experience dimensional changes during the test due to the loss of hydration water or which undergo other phase changes.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10882-1:2024(Main)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2024)
oSIST prEN ISO 10882-1:2023

This document specifies a procedure for sampling airborne particles in the breathing zone of a person who performs welding and allied processes (the operator). It also provides details of relevant standards that specify required characteristics, performance requirements and test methods for workplace air measurement, and augments guidance provided in EN 689 on assessment strategy and measurement strategy.
This document also specifies a procedure for making gravimetric measurements of personal exposure to airborne particles generated by welding and allied processes (welding fumes) and other airborne particles generated by welding-related operations.
Additionally, it provides references to suitable methods of chemical analysis specified in other standards to determine personal exposure to specific chemical agents present in welding fumes and other airborne particles generated by welding-related operations.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day