EN 845-1:2003+A1:2008
(Main)Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
This EN specifies requirements for ties, tension straps, hangers and brackets for interconnecting masonry and for connecting masonry to other parts of works and buildings including walls, floors, beams, and columns. Where anchors or fasteners are supplied or specified as part of an ancillary component, the requirements including performance requirements apply to the complete product.
Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil 1: Maueranker, Zugbänder, Auflager und Konsolen
Diese Europäische Norm legt die Anforderungen an Maueranker, Zugbänder, Auflager und Konsolen zur Verbindung von Bauteilen aus Mauerwerk untereinander und zur Verbindung von Mauerwerk mit anderen Teilen von baulichen Anlagen und Gebäuden einschließlich Wänden, Geschossdecken, Trägern und Stützen fest. Sofern Anker oder Befestigungsmittel als Teil eines Ergänzungsbauteils geliefert werden oder als solches festgelegt sind, gelten die Anforderungen einschließlich der Leistungsanforderungen für das vollständige Produkt.
Diese Europäische Norm gilt nicht für:
a) Anker und Befestigungsmittel, die nicht Teil eines Ergänzungsbauteils sind;
b) Wandabfangungen;
c) Wandanschlussplatten für die Verankerung in bestehenden Wänden;
d) Produkte aus anderen Materialien als:
1) austenitischer nichtrostender Stahl (Molybdän-Chrom-Nickel-Legierungen bzw. Chrom-Nickel- Legierungen);
2) ferritischer nichtrostender Stahl;
3) Kupfer;
4) Phosphorbronze;
5) Aluminiumbronze;
6) verzinktes Stahlblech mit oder ohne organischen Überzug;
7) Polypropylen;
8) Polyamid (nur Spreizdübel).
ANMERKUNG Es ist nicht möglich, den Feuerwiderstand der hierin aufgeführten Produkte unabhängig vom Mauerwerksbauteil, mit dem sie eine Einheit bilden, zu beurteilen. Der Feuerwiderstand ist daher nicht Gegenstand dieser Europäischen Norm.
Spécification pour composants accessoires de maçonnerie - Partie 1: Attaches, brides de fixation, étriers de support et consoles
La présente Norme européenne spécifie les prescriptions concernant les attaches, brides de fixation, brides de
suspension et consoles utilisées pour assurer les liaisons entre des maçonneries et les liaisons entre la
maçonnerie et d’autres parties de l’ouvrage ou de la construction, incluant les murs, planchers, poutres et poteaux.
Lorsque des éléments d’ancrage ou de fixation sont fournis ou spécifiés comme partie intégrante d’un composant
accessoire, les prescriptions, y compris les prescriptions de performances, s’appliquent au produit complet.
La présente Norme européenne n'est pas applicable aux :
a) éléments d’ancrage et de fixation autres que ceux qui font partie intégrante d’un composant accessoire ;
b) cornières supports ;
c) plaques supports de mur destinées à assurer la fixation avec des murs existants ;
d) produits composés de matériaux autres que les suivants :
1) acier inoxydable austénitique (alliages molybdène chrome nickel ou alliages chrome nickel) ;
2) acier inoxydable ferritique ;
3) cuivre ;
4) bronze phosphorique ;
5) bronze alumineux ;
6) acier galvanisé avec ou sans revêtement organique ;
7) polypropylène ;
8) polyamide (uniquement pour les chevilles à expansion).
NOTE La résistance au feu des produits inclus ci-après ne peut être évaluée séparément de l’élément de maçonnerie dont ils
font partie et n’est, par conséquent, pas couverte par le domaine d’application de la présente partie de cette
Norme européenne.
Specifikacija za dodatne komponente zidovja - 1. del: Vezna stremena, sidrni trakovi, obešala in konzole
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2008
Specifikacija za dodatne komponente zidovja - 1. del: Vezna stremena, sidrni
trakovi, obešala in konzole
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers
and brackets
Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil 1: Maueranker, Zugbänder,
Auflager und Konsolen
Spécification pour composants accessoires de maçonnerie - Partie 1: Attaches, brides
de fixation, étriers de support et consoles
Ta slovenski standard je istoveten z: EN 845-1:2003+A1:2008
ICS:
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
91.080.30 Zidane konstrukcije Masonry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 845-1:2003+A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2008
ICS 91.060.10; 91.080.30 Supersedes EN 845-1:2003
English Version
Specification for ancillary components for masonry - Part 1: Ties,
tension straps, hangers and brackets
Spécification pour composants accessoires de maçonnerie Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil
- Partie 1: Attaches, brides de fixation, étriers de support et 1: Maueranker, Zugbänder, Auflager und Konsolen
consoles
This European Standard was approved by CEN on 2 October 2002 and includes Amendment 1 approved by CEN on 2 December 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 845-1:2003+A1:2008: E
worldwide for CEN national Members.
Contents
page
Foreword. 3
1 Scope. 4
2 Normative references . 4
3 Terms, definitions and symbols . 6
3.1 Terms and definitions. 6
3.2 Symbols . 9
4 Materials. 9
4.1 General. 9
4.2 Fixings and materials not supplied by the manufacturer. 9
5 Requirements . 9
5.1 General. 9
5.2 Dimensions and limit deviations .10
5.3 Mechanical strength . 11
5.4 Resistance to water crossing a cavity. 14
5.5 Safety during installation . 14
5.6 Durability. 14
6 Description and designation. 14
7 Marking . 16
8 Evaluation of conformity. 16
8.1 General. 16
8.2 Initial type tests . 16
8.3 Factory production control . 17
8.4 Sampling for initial type testing and independent testing of consignments. 17
Annex A (normative) Materials and protective coatings. 19
Annex B (normative) Scheme of factory production control. 24
Annex ZA (informative) Clauses of this European Standard addressing the provisions of
the EU Construction Products Directive . 26
Bibliography . 56
Foreword
This document (EN 845-1:2003+A1:2008) has been prepared by Technical Committee CEN/TC 125
"Masonry", the secretariat of which is held by BSI.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2008 and conflicting national standards shall be
withdrawn at the latest by August 2008.
This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association and supports the essential requirements of the EU Construction
Products Directive (89/106/EEC).
For relationship with EU Directives, see informative Annex ZA which is an integral part of this
document.
This document includes Amendment 1 approved by CEN on 2007-12-02.
This document supersedes !EN 845-1:2003".
The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ".
In this European Standard the Annexes A and B are normative.
This Part has been modified, including the introduction of additional requirements, taking into account
the detailed answer by CEN/TC 125 to EC mandate M116 for masonry as well as details of the
relationship of this new harmonized European Standard with the EU Directives.
EN 845 “Specification for ancillary components for masonry” consists of the following Parts:
— Part 1: Wall ties, tension straps, hangers and brackets.
— Part 2: Lintels.
— Part 3: Bed joint reinforcement of steel meshwork.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard specifies requirements for wall ties, tension straps, hangers and brackets for
interconnecting masonry and for connecting masonry to other parts of works and buildings including
walls, floors, beams, and columns. Where anchors or fasteners are supplied or specified as part of an
ancillary component, the requirements including performance requirements apply to the complete
product.
This European Standard is not applicable to:
a) anchors and fasteners other than as part of an ancillary component;
b) shelf angles;
c) wall starter plates for tying into existing walls;
d) products formed from materials other than:
1) austenitic stainless steel (molybdenum chrome nickel alloys or chrome nickel alloys);
2) ferritic stainless steel;
3) copper;
4) phosphor bronze;
5) aluminium bronze;
6) zinc-coated-steel with or without organic coating;
7) polypropylene;
8) polyamide (for expansion plugs only).
NOTE The resistance fire performance of the products included herein cannot be assessed separately from
the masonry element of which they are part and is therefore not covered under the scope of this part of this
European Standard.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 846-4, Methods of test for ancillary components for masonry — Part 4: Determination of load
capacity and load-deflection characteristics of straps
EN 846-5, !Methods of test for ancillary components for masonry — Part 5: Determination of tensile
and compressive load capacity and load displacement characteristics of wall ties (couple test)"
EN 846-6, !Methods of test for ancillary components for masonry — Part 6: Determination of tensile
and compressive load capacity and load displacement characteristics of wall ties (single end test)"
EN 846-7, Methods of test for ancillary components for masonry — Part 7: Determination of shear
load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar
joint connections)
EN 846-8, Methods of test for ancillary components for masonry — Part 8: Determination of load
capacity and load-deflection characteristics of joist hangers
EN 846-10, Methods of test for ancillary components for masonry — Part 10: Determination of load
capacity and load-deflection characteristics of brackets
EN 846-13:2001, Methods of test for ancillary components for masonry — Part 13: Determination of
resistance to impact, abrasion and corrosion of organic coatings
EN 10020, Definitions and classification of grades of steel
EN 10088-1, Stainless steels — Part 1: List of stainless steels
EN 10088-2, !Stainless steels — Part 2: Technical delivery conditions for sheet/plate and strip of
corrosion resisting steels for general purposes"
EN 10088-3, !Stainless steels — Part 3: Technical delivery conditions for semi-finished products,
bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes"
!deleted text"
!EN 10143:2006, Continuously hot-dip coated steel sheet and strip — Tolerances on dimensions
and shape"
!deleted text"
EN 10244-1, Steel wire and wire products — Non-ferrous metallic coatings on steel wire —
Part 1: General principles
EN 10244-2, !Steel wire and wire products — Non-ferrous metallic coatings on steel wire — Part 2:
Zinc or zinc alloy coatings"
EN 10245-1, !Steel wire and wire products — Organic coatings on steel wire — Part 1: General
rules"
EN 10245-2, !Steel wire and wire products — Organic coatings on steel wire — Part 2: PVC
finished wire"
EN 10245-3, !Steel wire and wire products — Organic coatings on steel wire — Part 3: PE coated
wire"
!EN 10326, Continuously hot-dip coated strip and sheet of structural steels — Technical delivery
conditions"
!EN 10327, Continuously hot-dip coated strip and sheet of low carbon steels for cold forming —
Technical delivery conditions"
EN ISO 1461, !Hot dip galvanized coatings on fabricated iron and steel articles — Specifications
and test methods (ISO 1461:1999)"
EN ISO 1463, !Metallic and oxide coatings — Measurement of coating thickness — Microscopical
method (ISO 1463:2003)"
ISO 75-1, Plastics — Determination of temperature of deflection under load — Part 1: General test
method
ISO 75-2, !Plastics — Determination of temperature of deflection under load — Part 2: Plastics and
ebonite"
ISO 178, Plastics — Determination of flexural properties
!ISO 180:2000", Plastics — Determination of Izod impact strength
ISO 306, Plastics — Thermoplastic materials — Determination of Vicat Softening Temperature (VST)
ISO 427, Wrought copper-tin alloys — Chemical composition and forms of wrought products
ISO 428, Wrought copper-aluminium alloys — Chemical composition and forms of wrought products
ISO 431, Copper refinery shapes
ISO 527-1, Plastics — Determination of tensile properties — Part 1: General principles
ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and
extrusion plastics
ISO 1133, Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate
(MVR) of thermoplastics
ISO 1183, !Plastics — Methods for determining the density of non-cellular plastics"
ISO 2039-2, Plastics — Determination of hardness — Part 2: Rockwell hardness
3 Terms, definitions and symbols
3.1 Terms and definitions
For the purposes of this European Standard the following terms and definitions apply.
NOTE Dimensions and terms relating to wall ties are given in Figure 1.
3.1.1
asymmetric
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.