EN ISO 13628-1:2005/A1:2010

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 1: Revised Clause 6 (ISO 13628-1:2005/Amd 1:2010)

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard. The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells. This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4. Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment. If requirements as stated in this part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-Produktionssystemen - Teil 1: Allgemeine Anforderungen und Empfehlungen - Änderung A1: Überarbeitung Abschnitt 6 (ISO 13628-1:2005/Amd 1:2010)

Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 1: Exigences générales et recommandations - Amendement 1: Révision de l'Article 6 (ISO 13628-1:2005/Amd 1:2010)

Industrija za predelavo nafte in zemeljskega plina - Načrtovanje in upravljanje proizvodnje v podmorskih sistemih - 1. del: Splošne zahteve in priporočila - Dopolnilo 1: Popravljena točka 6 (ISO 13628-1:2005/Amd 1:2010)

General Information

• Status: Published
• Publication Date: 14-Aug-2010
• Withdrawal Date: 27-Feb-2011
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Aug-2010
• Completion Date: 15-Aug-2010
• Ref Project: SIST EN ISO 13628-1:2006/A1:2014 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 1: Revised Clause 6 (ISO 13628-1:2005/Amd 1:2010)

Relations

• Amends: EN ISO 13628-1:2005 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:2005)
• Effective Date: 22-Dec-2008
• Revised: prEN ISO 13628-1 - Oil and gas industries including low carbon energy - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO/DIS 13628-1:2023)
• Effective Date: 11-Oct-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13628-1:2006/A1:2014
01-marec-2014
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQXSUDYOMDQMH
SURL]YRGQMHYSRGPRUVNLKVLVWHPLKGHO6SORãQH]DKWHYHLQSULSRURþLOD
'RSROQLOR3RSUDYOMHQDWRþND,62$PG
Petroleum and natural gas industries - Design and operation of subsea production
systems - Part 1: General requirements and recommendations - Amendment 1: Revised
Clause 6 (ISO 13628-1:2005/Amd 1:2010)
Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-
Produktionssystemen - Teil 1: Allgemeine Anforderungen und Empfehlungen - Änderung
A1: Überarbeitung Abschnitt 6 (ISO 13628-1:2005/Amd 1:2010)
Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de
production immergés - Partie 1: Exigences générales et recommandations -
Amendement 1: Révision de l'Article 6 (ISO 13628-1:2005/Amd 1:2010)
Ta slovenski standard je istoveten z: EN ISO 13628-1:2005/A1:2010
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 13628-1:2006/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13628-1:2006/A1:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 13628-1:2006/A1:2014


EUROPEAN STANDARD
EN ISO 13628-1:2005/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2010
ICS 75.180.10
English Version
Petroleum and natural gas industries - Design and operation of
subsea production systems - Part 1: General requirements and
recommendations - Amendment 1: Revised Clause 6 (ISO
13628-1:2005/Amd 1:2010)
Industries du pétrole et du gaz naturel - Conception et Erdöl- und Erdgasindustrie - Auslegung und Betrieb von
exploitation des systèmes de production immergés - Partie
Unterwasser-Produktionssystemen - Teil 1: Allgemeine
1: Exigences générales et recommandations - Anforderungen und Empfehlungen - Änderung A1:
Amendement 1: Révision de l'Article 6 (ISO 13628- Überarbeitung Abschnitt 6 (ISO 13628-1:2005/Amd 1:2010)
1:2005/Amd 1:2010)
This amendment A1 modifies the European Standard EN ISO 13628-1:2005; it was approved by CEN on 2 July 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13628-1:2005/A1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13628-1:2006/A1:2014
EN ISO 13628-1:2005/A1:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13628-1:2006/A1:2014
EN ISO 13628-1:2005/A1:2010 (E)
Foreword
This document (EN ISO 13628-1:2005/A1:2010) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 13628-1:2005 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2011, and
conflicting national standards shall be withdrawn at the latest by February 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such
...

SLOVENSKI STANDARD
SIST EN ISO 13628-1:2006/oprA1:2008
01-februar-2008
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQXSUDYOMDQMH
SURL]YRGQMHYSRGPRUVNLKVLVWHPLKGHO6SORãQH]DKWHYHLQSULSRURþLOD
'RSROQLOR3RSUDYOMHQRSRJODYMH,62'$0
Petroleum and natural gas industries - Design and operation of subsea production
systems - Part 1: General requirements and recommendations - Amendment 1: Revised
Clause 6 (ISO 13628-1:2005/DAM 1:2007)
Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-
Produktionssystemen - Teil 1: Allgemeine Anforderungen und Empfehlungen (ISO 13628
-1:2005/DAM 1:2007)
Industries du pétrole et du gaz naturel - Conception et exploitation des systemes de
production immergés - Partie 1: Exigences générales et recommandations -
Amendement 1: Révision de l'Article 6 (ISO 13628-1:2005/DAM 1:2007)
Ta slovenski standard je istoveten z: EN ISO 13628-1:2005/prA1
ICS:
75.180.10
SIST EN ISO 13628-1:2006/oprA1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
DRAFT
EN ISO 13628-1:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2007
ICS 75.180.10

English Version
Petroleum and natural gas industries - Design and operation of
subsea production systems - Part 1: General requirements and
recommendations - Amendment 1: Revised Clause 6 (ISO
13628-1:2005/DAM 1:2007)
Industries du pétrole et du gaz naturel - Conception et
exploitation des systèmes de production immergés - Partie
1: Exigences générales et recommandations -
Amendement 1: Révision de l'Article 6 (ISO 13628-
1:2005/DAM 1:2007)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 12.
This draft amendment A1, if approved, will modify the European Standard EN ISO 13628-1:2005. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13628-1:2005/prA1:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 13628-1:2005/prA1:2007 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 13628-1:2005/prA1:2007 (E)
Foreword
This document (EN ISO 13628-1:2005/prA1:2007) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in collaboration with
Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries” the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DAM 13628-1:2005 has been approved by CEN as a EN ISO 13628-1:2005/prA1:2007
without any modification.

3

---------------------- Page: 4 ----------------------

DRAFT AMENDMENT ISO 13628-1:2005/DAmd 1
ISO/TC 67/SC 4 Secretariat: ANSI
Voting begins on: Voting terminates on:
2007-11-01 2008-04-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Petroleum and natural gas industries — Design and operation of
subsea production systems —
Part 1:
General requirements and recommendations
AMENDMENT 1: Revised
...