EN 10258:1997

Cold-rolled stainless steel and narrow strip and cut lengths - Tolerances on dimensions and shape

This European Standard applies to cold-rolled stainless, heat-resisting steel flat products in thicknesses up to and including 3,0 mm and rolled widths of less than 600 mm delivered as: a) narrow strip (coils with a rolled width < 600 mm), b) slit cold-rolled narrow strip, c) cut lengths obtained from slit cold- rolled narrow strip or cold-rolled narrow strip. It does not apply to cold- rolled stainless, heat resisting and creep resisting steel wide strip and plate/sheet (rolled width greater or equal to 600 mm, see EN 10259), or to cold-rolled products for which there is a specific standard.

Kaltband und Kaltband in Stäben aus nichtrostendem Stahl - Grenzabmaße und Formtoleranzen

Diese europäische Norm gilt für kaltgewalzte Flacherzeugnisse aus nichtrostenden und hitzebeständigen Stählen in Dicken < oder = 3,0 mm und in Walzbreiten < 600 mm, lieferbar als: a) Kaltband (in Rollen in Walzbreiten < 600 mm), b) Längsgeteiltes Kaltband, c) Stäbe (abgelängt aus längsgeteiltem Kaltband oder Kaltband).

Feuillards ou feuillards coupés à longueur en acier inoxydable laminés à froid - Tolérances sur les dimensions et la forme

La présente norme européenne est applicable aux produits plats laminés à froid en acier inoxydable et en acier réfractaire, d'épaisseur < ou égale à 3,0 mm et de largeur de laminage inférieure à 600 mm, livrés sous forme de: a) feuillard (bobines avec largeur laminée < 600 mm), b) feuillard refendu, c) feuillard coupé à longueur (flan) obtenu à partir de feuillard refendu ou du feuillard d'origine.

Hladno valjani ozki trakovi iz nerjavnih jekel in razrez - Mejni odstopki mer in tolerance oblik

General Information

• Status: Withdrawn
• Publication Date: 20-May-1997
• Withdrawal Date: 28-Feb-2006
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: ECISS/TC 105 - Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
• Drafting Committee: ECISS/TC 23/SC 1 - Stainless steels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Mar-2006
• Completion Date: 01-Mar-2006
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10258:1998 - Cold-rolled stainless steel and narrow strip and cut lengths - Tolerances on dimensions and shape

Relations

• Replaced By: EN ISO 9445:2006 - Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno valjani ozki trakovi iz nerjavnih jekel in razrez - Mejni odstopki mer in tolerance oblikKaltband und Kaltband in Stäben aus nichtrostendem Stahl - Grenzabmaße und FormtoleranzenFeuillards ou feuillards coupés a longueur en acier inoxydable laminés a froid - Tolérances sur les dimensions et la formeCold-rolled stainless steel and narrow strip and cut lengths - Tolerances
...