Unbound and hydraulically bound mixtures - Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag

This standard defines the procedure for measuring the alpha coefficient of vitrified blast furnace slag. It applies to vitrified blast furnace slag obtained by granulation or by pelletizing.

Ungebundene und hydraulisch gebundene Gemische - Teil 44: Prüfverfahren zur Bestimmung des Alpha-Koeffizienten von verglaster Hochofenschlacke

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung des Alpha (  )Koeffizienten von verglaster Hochofenschlacke.
Diese Europäische Norm gilt für verglaste Hochofenschlacke, die durch Granulieren oder Pelletieren erhalten wurde.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 44: Méthode d'essai pour la détermination du coefficient alpha du laitier vitrifié de haut fourneau

Cette Norme européenne décrit une la méthode d'essai pour la détermination du coefficient alpha (a) du laitier vitrifié de haut fourneau.
Cette Norme européenne s'applique au laitier vitrifié de haut fourneau obtenu par granulation ou bouletage.

Nevezane in hidravlično vezane zmesi – 44. del: Preskusna metoda za ugotavljanje koeficienta alfa steklaste plavžne žlindre

General Information

Status
Published
Publication Date
06-May-2003
Withdrawal Date
29-Nov-2003
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
14-Feb-2022

Buy Standard

Standard
EN 13286-44:2004
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 44: Prüfverfahren zur Bestimmung des Alpha-Koeffizienten von verglaster HochofenschlackeMélanges traités et mélanges non traités aux liants hydrauliques - Partie 44: Méthode d'essai pour la détermination du coefficient alpha du laitier vitrifié de haut fourneauUnbound and hydraulically bound mixtures - Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-44:2003SIST EN 13286-44:2004en01-junij-2004SIST EN 13286-44:2004SLOVENSKI
STANDARD



SIST EN 13286-44:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-44May 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 44: Testmethod for the determination of the alpha coefficient of vitrifiedblast furnace slagMélanges traités aux liants hydrauliques et graves nontraitées - Partie 44: Méthode d'essai pour la déterminationdu coefficient alpha des laitiers de hauts-fourneaux vitrifiésUngebundene und hydraulisch gebundene Gemische - Teil44: Prüfverfahren zur Bestimmung des Alpha-Koeffizientenvon verglaster HochofenschlackeThis European Standard was approved by CEN on 21 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-44:2003 ESIST EN 13286-44:2004



EN 13286-44:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Term and definition.44Apparatus.54.1Specific grinding equipment for friability measurement.54.2Specific equipment for measuring the specific surface of vitrified blast furnace slag.54.3General equipment.55Sampling and preparation.55.1Sampling.55.2Preparation of test sample.56Test procedure.66.1Friability.66.2Specific surface and density.77Expression of results.78Test report.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.