EN ISO 10440-2:2001
(Main)Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
This part of ISO 10440 covers the minimum requirements for helical, spiral and straight-lobe, oil-free rotary
compressors used for applications up to 0,20 MPa in refinery services. It is applicable to air (and other inert gas)
compressors that are in continuous duty on process units.
This part of ISO 10440 is not applicable to oil injected rotary compressors.
NOTE A bullet (?) at the beginning of a clause or sub-clause indicates that either a decision is required or further
information is to be provided by the purchaser. This information should be indicated on the data sheets; otherwise it should be
stated in the quotation request or in the order.
Erdöl- und Erdgasindustrie - Rotierende Verdrängerkompressoren - Teil 2: Luftkompressoranlagen (ölfrei) (ISO 10440-2:2001)
Dieser Teil der ISO 10440 legt Mindestanforderungen an ölfreie Verdränger-Kompressoren mit schrauben-förmig, spiralförmig oder gerade angeordneten Flügeln fest, die bei der Raffination zur Erzeugung von Drücken bis zu 0,20 MPa angewendet werden. Dieser Teil von ISO 10440 ist auf Luftkompressoren (sowie auf Kompressoren für andere inerte Gase) anwendbar, die an Prozesseinheiten im Dauerbetrieb eingesetzt werden.
Der vorliegende Teil von ISO 10440 ist nicht auf Verdränger-Kompressoren mit Ölinjektion anwendbar.
ANMERKUNG Eine Markierung durch einen Vollkreis (h) am Beginn eines Absatzes bedeutet, dass entweder eine Entscheidung erforderlich ist oder weitere Informationen vom Besteller bereitzustellen sind. Diese Informationen sollten in den
Datenblättern angegeben werden; anderenfalls sollten sie in dem angeforderten Kostenvoranschlag (Anfrage) oder im Auftrag vermerkt werden.
Industries du pétrole et du gaz naturel - Compresseurs volumétriques de type rotatif - Partie 2: Compresseurs à air assemblé (sans huile) (ISO 10440-2:2001)
La présente partie de l'ISO 10440 spécifie les prescriptions minimales concernant les compresseurs rotatifs sans
huile hélicoïdaux, en spirale et avec lobes droits, utilisés en raffineries pour des applications jusqu'à 0,20 MPa. Elle
est applicable à des compresseurs à air (et autres gaz inertes) fonctionnant en service continu dans des unités de
procédé.
La présente partie de l'ISO 10440 n'est pas applicable aux compresseurs rotatifs à injection.
NOTE Le symbole (?) au commencement d'un article ou d'un paragraphe indique que soit une décision est exigée, soit une
nouvelle information doit être fournie par l'acheteur. Il convient que cette information soit indiquée sur les feuilles de données; à
défaut, il est bon qu'elle soit citée dans l'appel d'offre ou dans la commande.
Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10440-2:2004
01-maj-2004
Petroleum and natural gas industries - Rotary-type positive-displacement
compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
Petroleum and natural gas industries - Rotary-type positive-displacement compressors -
Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
Erdöl- und Erdgasindustrie - Rotierende Verdrängerkompressoren - Teil 2:
Luftkompressoranlagen (ölfrei) (ISO 10440-2:2001)
Industries du pétrole et du gaz naturel - Compresseurs volumétriques de type rotatif -
Partie 2: Compresseurs a air assemblé (sans huile) (ISO 10440-2:2001)
Ta slovenski standard je istoveten z: EN ISO 10440-2:2001
ICS:
23.140 .RPSUHVRUMLLQSQHYPDWLþQL Compressors and pneumatic
VWURML machines
75.180.20 Predelovalna oprema Processing equipment
SIST EN ISO 10440-2:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10440-2:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 10440-2:2004
---------------------- Page: 3 ----------------------
SIST EN ISO 10440-2:2004
---------------------- Page: 4 ----------------------
SIST EN ISO 10440-2:2004
INTERNATIONAL ISO
STANDARD 10440-2
First edition
2001-12-01
Petroleum and natural gas industries —
Rotary-type positive-displacement
compressors —
Part 2:
Packaged air compressors (oil-free)
Industries du pétrole et du gaz naturel — Compresseurs volumétriques de
type rotatif —
Partie 2: Compresseurs à air assemblé (sans huile)
Reference number
ISO 10440-2:2001(E)
©
ISO 2001
---------------------- Page: 5 ----------------------
SIST EN ISO 10440-2:2004
ISO 10440-2:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 10440-2:2004
ISO 10440-2:2001(E)
Contents Page
Foreword.iv
Introduction.v
1 Scope .1
2 Normative references.1
3 Terms and definitions .3
4 Basic design.5
4.1 General.5
4.2 Pressure casing .6
4.3 Casing connections.7
4.4 External forces and moments .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.