EN 13459:2011
(Main)Road marking materials - Sampling from storage and testing
Road marking materials - Sampling from storage and testing
This document specifies methods to obtain representative samples of road marking materials for testing and gives the appropriate test methods. The methods to obtain representative samples are described as appropriate for the main product types, i.e. paint, cold plastics, thermoplastics, premix glass beads, drop-on materials, preformed road markings and retroreflecting road studs.
NOTE This document may apply to the verification and/or identification of consignments of road marking materials or materials held in stock, for example in a warehouse or at the manufacturer's storage facility, or for materials which require checking prior to application.
Straßenmarkierungsmaterialien - Probenahme an rückgestellter Produktion und Prüfung
Produits de marquage routier - Échantillonnage sur stock et essais
La présente Norme européenne définit les méthodes de prélèvement d’échantillons représentatifs des
produits de marquage routier pour essai et fournit les méthodes d’essai appropriées. Les méthodes de
prélèvement d’échantillons représentatifs sont décrites pour les principaux types de produits, c’est-à-dire les
peintures, les enduits à froid, les enduits à chaud, les microbilles de verre de prémélange, les produits de
saupoudrage, les produits de marquage routier préfabriqués et les plots rétroréfléchissants.
NOTE La présente Norme européenne peut s’appliquer à la vérification et/ou à l’identification des produits de
marquage routier stockés, par exemple dans un entrepôt ou une installation de stockage du fabricant, ou pour les produits
nécessitant une vérification avant leur application.
Materiali za označevanje vozišča - Vzorčenje in preskušanje
Ta dokument določa metode za pridobivanje reprezentativnih vzorcev materialov za označevanje vozišča za preskušanje in podaja primerne preskusne metode. Metode za pridobivanje reprezentativnih vzorcev so opisane kot primerne za glavne vrste proizvodov, tj. barva, hladna plastika, termoplasti, vnaprej namešane steklene kroglice, materiali za posipanje, vnaprej oblikovani materiali za označevanje vozišča in odsevniki.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Straßenmarkierungsmaterialien - Probenahme an rückgestellter Produktion und PrüfungProduits de marquage routier - Échantillonnage sur stock et essaisRoad marking materials - Sampling from storage and testing93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13459:2011SIST EN 13459:2011en01-oktober-2011SIST EN 13459:2011SLOVENSKI
STANDARDSIST ENV 13459-1:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13459
June 2011 ICS 93.080.20 Supersedes ENV 13459-1:1999English Version
Road marking materials - Sampling from storage and testing
Produits de marquage routier - Échantillonnage sur stock et essais
Straßenmarkierungsmaterialien - Probenahme an rückgestellter Produktion und Prüfung This European Standard was approved by CEN on 22 April 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13459:2011: ESIST EN 13459:2011
Minimum information required to accompany the sample . 10 SIST EN 13459:2011
Preformed road markings, EN 1824, Road marking materials
Road trials, EN 1871, Road marking materials
Paint, thermoplastic and cold plastic materials Specifications, EN 12802, Road marking materials
Laboratory methods for identification, EN 13197, Road marking materials
Wear simulator Turntable, EN 13212, Road marking materials
Requirements for factory production control, EN 13459, Road marking materials
Sampling and testing.
NOTE This document may apply to the verification and/or identification of consignments of road marking materials or materials held in stock, for example in a warehouse or at the manufacturer's storage facility, or for materials which require checking prior to application. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1423, Road marking materials
Drop on materials
Glass beads, antiskid aggregates and mixtures of the two EN 1424, Road marking materials
Premix glass beads EN 1463-1, Road marking materials
Retroreflecting road studs
Part 1: Initial performance requirements EN 1790, Road marking materials
Preformed road markings EN 1871, Road marking materials
Paint, thermoplastic and cold plastic materials Specifications EN 12802, Road marking materials
Laboratory methods for identification EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes
Sampling (ISO 15528:2000) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 original product container primary packaging of each batch of a road marking material 3.2 intermediate bulk container (IBC)
container used as an intermediate size between bags and tins and bulk transport. 4 Sampling procedures NOTE Clause 4 specifies the procedure for the selection of original product containers and for obtaining representative samples from a stock for subsequent inspection and testing. 4.1 General 4.1.1 When a series of original product containers to be examined can be identified as being from a single batch, the number of containers to be selected for sampling shall be 1 %. Not less than two and not more than five containers shall be selected for sampling. SIST EN 13459:2011
NOTE Where the calculation of n does not yield an integer, the number shall be rounded up to the next whole number.
The samples shall be labelled with the information required to accompany the sample as specified in Annex A. NOTE In order to avoid excessively large amounts of product being removed as samples it may be more appropriate to take representative samples on the storage site. When removing reduced samples from containers, reference
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.