EN 13035-11:2006+A1:2010
(Main)Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
This European Standard contains the requirements for stationary machines for the drilling of flat glass, using a powered rotating tool. Stationary machines are classified into:
a) manual;
b) semi-automatic;
c) automatic single-head or multi-head;
d) fully automatic.
1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to drilling machines for flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Safety requirements and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 983, EN 999, EN 1037,
EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where choice is necessary.
1.3 This European Standard does not address the safety requirements for conveyor belts, rollers (see EN 619) or other means of transporting the glass to and from the drilling machine (see e.g. EN 13035-5).
1.4 This European Standard is not applicable to drilling machines which are manufactured before the date of publication of this European Standard by CEN.
Maschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 11: Bohrmaschinen
Machines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 11 : Machines de perçage
1.1 La présente Norme européenne contient les prescriptions de sécurité relatives aux machines stationnaires destinées au perçage du verre plat, à l'aide d'un outil dont la rotation est motorisée. Les machines stationnaires (ou fixes) sont classées comme suit :
a) manuelles ;
b) semi-automatiques ;
c) automatiques à une tête ou à têtes multiples ;
d) entièrement automatiques.
1.2 !La présente Norme européenne traite les phénomènes dangereux, situations et événements dangereux significatifs spécifiques aux machines de perçage du verre plat, lorsqu'elles sont utilisées normalement et dans les conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant (voir Article 4)." La présente Norme européenne spécifie les mesures techniques appropriées pour éliminer ou réduire les risques susceptibles d’être engendrés par ces phénomènes dangereux significatifs lors des opérations de mise en service, de fonctionnement et de maintenance. !Les prescriptions de sécurité et/ou les mesures de prévention sont données à l’Article 5. Lorsque des références sont faites à des normes de type B telles que l’EN 953, l'EN 983, l'EN 999, l'EN 1037, l'EN 1088, l'EN 60204-1, l'EN ISO 13850 et l'EN ISO 13857, il convient que le constructeur effectue une appréciation du risque adéquate pour déterminer les prescriptions de la norme de type B qui s’appliquent."
1.3 La présente Norme européenne ne traite pas les prescriptions de sécurité relatives aux convoyeurs à courroie, à rouleaux (voir EN 619) ou tout autre moyen de transport du verre depuis ou vers la machine de perçage (voir par exemple, EN 13035-5).
1.4 La présente Norme européenne ne s’applique pas aux machines de perçage fabriquées avant la date de publication de la présente Norme européenne par le CEN.
Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 11. del: Vrtalni stroji
Ta evropski standard vsebuje zahteve za stacionarne stroje za vrtanje ravnega stekla z uporabo gnanega vrtečega orodja. Stacionarni stroji so razvrščeni v: a) ročne; b) polavtomatske; c) avtomatske z eno ali več glavami; d) popolnoma avtomatske. Ta evropski standard obravnava velike nevarnosti, nevarne situacije in primere, ki se tičejo vrtalnih strojev za ravno steklo, kadar se uporabljajo v skladu z namembnostjo in pod pogoji napačne uporabe, ki jih upravičeno predvidel proizvajalec (glej Klavzulo 4). Ta evropski standard opredeljuje ustrezne tehnične ukrepe za odpravo ali zmanjševanje tveganj, ki nastanejo zaradi velikih nevarnosti med usposobitvijo za zagon, obratovanjem in vzdrževanjem. !Varnostne zahteve in/ali zaščitni ukrepi so podani v Klavzuli 5. Ob sklicu na standarde ravni B, kot so EN 953, EN 983, EN 999, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 in EN ISO 13857, mora proizvajalec opraviti ustrezno oceno tveganja za zahteve le-teh, kjer je potrebna izbira.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji in obrati za proizvodnjo, obdelavo in predelavo ravnega stekla - Varnostne zahteve - 11. del: Vrtalni strojiMaschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 11: BohrmaschinenMachines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 11 : Machines de perçageMachines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines81.100Equipment for the glass and ceramics industries25.080.40VrtalnikiDrilling machinesICS:Ta slovenski standard je istoveten z:EN 13035-11:2006+A1:2010SIST EN 13035-11:2007+A1:2010en,fr01-maj-2010SIST EN 13035-11:2007+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13035-11:2006+A1
March 2010 ICS 81.100 Supersedes EN 13035-11:2006English Version
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
Machines et installations pour la production, le façonnage et la transformation du verre plat - Exigences de sécurité - Partie 11: Machines de perçage
Maschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 11: Bohrmaschinen This European Standard was approved by CEN on 24 May 2006 and includes Amendment 1 approved by CEN on 24 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-11:2006+A1:2010: ESIST EN 13035-11:2007+A1:2010
Example of a movable interlocking guard for a drilling machine . 14Annex B (normative)
!!!!Noise-test code"""" . 15Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 17Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC"""" . 18Bibliography . 19
Tables !Table 1 — List of significant hazards . 8 SIST EN 13035-11:2007+A1:2010
1 Scope 1.1 This European Standard contains the requirements for stationary machines for the drilling of flat glass, using a powered rotating tool. Stationary machines are classified into: a) manual; b) semi-automatic; c) automatic single-head or multi-head; d) fully automatic. 1.2 !This European Standard deals with the significant hazards, hazardous situations and events rele-vant to drilling machines for flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4)." This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. !Safety requirements and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 983, EN 999, EN 1037,
EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate risk assessment for the requirements thereof where choice is necessary." 1.3 This European Standard does not address the safety requirements for conveyor belts, rollers (see EN 619) or other means of transporting the glass to and from the drilling machine (see e.g. EN 13035-5). 1.4 This European Standard is not applicable to drilling machines which are manufactured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text" EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards !deleted text" EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Pneumatics !deleted text" EN 1088:1995, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection !EN 60204-1:2006, Safety of machinery — Electrical equipment of machines — Part 1: General require-ments (IEC 60204-1:2005, modified)" EN 60825-1:1994, Safety of laser products — Part 1: Equipment classification, requirements and user's guide (IEC 60825-1:1993) SIST EN 13035-11:2007+A1:2010
machining operations are under the control and guidance of the operator.
NOTE During the machining operations, the operator does not come into contact with the workpiece 3.3 automatic machine machine where the workpiece is loaded and unloaded by the operator, but all the intermediate machining
operations are carried out without operator intervention 3.4 fully automatic machine machine where the workpiece is presented to and removed from the tools automatically and all the intermedi-ate machining operations are carried out without intervention of the operator 4 List of significant hazards This clause contains the significant hazards, hazardous situations and events, as far as they are dealt with in this European Standard, identified by risk assessment as significant for drilling machines and which require action to eliminate or reduce the risk. !deleted text" SIST EN 13035-11:2007+A1:2010
Danger zone/dangerous items Preventive
measures: see clause 4.1 crushing during down stroke of the clamp 5.4; 5.7; 7.3.8 4.2 cutting or severing during drilling operation 5.4; 5.7 4.3 entanglement during drilling and glass positioning opera-tions 5.4; 5.7 4.4 drawing-in or trapping during drilling and glass positioning opera-tions 5.4; 5.7 4.5 impact during down stroke of the clamp 5.4; 5.7; 7.3.8 4.6 friction or abrasion during drilling operation 5.4; 5.7 4.7 electrical direct or indirect contact 5.5; 5.8; 5.9; 7.3.5 4.8 resulting from contact with or inha-lation of harmful fluids, gases, mists, fumes and dusts coolants 5.2; 7.3.6 4.9 biological and micro-biological (vi-ral or bacterial) coolants 5.2; 7.3.6 4.10 neglected use of personal protec-tion equipment all operational phases of the machine 5.8; 7.3.3 4.11 impossibility of stopping in the best possible conditions during operation of the machine 5.6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.