EN ISO 11688-1:2009
(Main)Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Serves as an aid to understanding the basic concepts of noise control in machinery and equipment. The recommended practice presented is intended to assist the designer at any design stage to control the noise of the final product. Makes references to numerous technical publications dealing with acoustical problems.
Akustik - Richtlinien für die Gestaltung lärmarmer Maschinen und Geräte - Teil 1: Planung (ISO/TR 11688-1:1995)
Der Text von ISO/TR 11688-1:1995 wurde vom CEN als EN ISO 11688-1:2009 ohne irgendeine Abänderung genehmigt.
Acoustique - Pratique recommandée pour la conception de machines et d'équipements à bruit réduit - Partie 1: Planification (ISO/TR 11688-1:1995)
Akustika - Priporočila za konstruiranje tihih strojev in naprav - 1. del: Načrtovanje (ISO/TR 11688-1:1995)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Akustik - Richtlinien für die Konstruktion lärmarmer Maschinen und Geräte - Teil 1: Planung (ISO/TR 11688-1:1995)Acoustique - Pratique recommandée pour la conception de machines et d'équipements à bruit réduit - Partie 1: Planification (ISO/TR 11688-1:1995)Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)21.020Characteristics and design of machines, apparatus, equipment17.140.20Emisija hrupa naprav in opremeNoise emitted by machines and equipmentICS:Ta slovenski standard je istoveten z:EN ISO 11688-1:2009SIST EN ISO 11688-1:2009en01-november-2009SIST EN ISO 11688-1:2009SLOVENSKI
STANDARDSIST EN ISO 11688-1:1999/AC:2004SIST EN ISO 11688-1:19991DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11688-1August 2009ICS 17.140.20; 21.020Supersedes EN ISO 11688-1:1998
English VersionAcoustics - Recommended practice for the design of low-noisemachinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)Acoustique - Pratique recommandée pour la conception demachines et d'équipements à bruit réduit - Partie 1:Planification (ISO/TR 11688-1:1995)Akustik - Richtlinien für die Konstruktion lärmarmerMaschinen und Geräte - Teil 1: Planung (ISO/TR 11688-1:1995)This European Standard was approved by CEN on 3 August 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11688-1:2009: ESIST EN ISO 11688-1:2009
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC .4Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .5 SIST EN ISO 11688-1:2009
Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 98/37/EC, amended by 98/79/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING - Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. SIST EN ISO 11688-1:2009
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.
TECHNICAL REPORT IS0 TR 11688-l First edition 1995-03-I 5 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning Acoustique - Pratique recommandge pour la conception de machines et d’6quipements 2 bruit r6duit - Partie I: Planifica tion Reference number ISOfTR 17 688-1:1995(E) SIST EN ISO 11688-1:2009
IsO/TR 11688=1:1995(E) Contents Page I Scope . 1 2 References . 1 3 Definitions . 2 4 Methodical design and acoustic aspects . 4 5 Conceptual and detailed design . 5 6 Low-noise prototyping . 23 7 Final testing . 25 Annexes A Summary of design rules . 26 B Noise control requirements for design . 31 C Information to be reported . 34 D Bibliography . 36 0 IS0 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 11688-1:2009
0 IS0 ISO/TR 11688=1:1995(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the Internation Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The main task of technical committees is to prepare International Standards, but in exceptional circumstances a technical committee may propose the publication of a Technical Report of one of the following types: - type 1, when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts; - type 2, when the subject is still under technical development or where for any other reason there is the future but not immediate possibility of an agreement on an International Standard; - type 3, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example). Technical Reports of types 1 and 2 are subject to review within three years of publication, to decide whether they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to be reviewed until the data they provide are considered to be no longer valid or useful. lSO/TR 11688-1, which is a Technical Report of type 3, was prepared by Technical Committee lSO/rC 43, Acoustics, Subcommittee SC 1, Noise. IS0 11688 consists of the following parts, under the general title Acoustics - Recommended practice for the design of low-noise machinery and equipment: - Part “I: Planning [Technical Report] - Par? 2: Introduction into physics of low-noise design ,. III SIST EN ISO 11688-1:2009
ISO/TR 11688=1:1995(E) 0 IS0 Introduction This International Technical Report provides a guideline for the design of low-noise machinery. Most of the existing International Technical Reports prepared in ISO/TC 43/SC I specify methods for the measurement and/or evaluation of noise. The final objective of this International Technical Report, however, will be noise control in existing machinery and noise control at the design stage. It is important that non-acoustic engineers are engaged in noise control practice. It is of great importance for these engineers to have a basic knowledge of noise generation and propagation characteristics and to understand the basic principles of noise control measures. Hence, this International Technical Report also serves as an introduction into acoustical terms, and as a basis to the acquisition of further knowledge in noise control. It is strongly required to support the dissemination of the given here through standardisation. Such considerations have led to the preparation of Technical Reports in the area of noise control. design rules nternational SIST EN ISO 11688-1:2009
‘TECHNICAL REPORT @ IS0 ISO/TR 11688=1:1995(E1) Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning 1 Scope This International Technical Report is an aid to understanding the basic concepts of noise control in machinery and equipment. The recommended practice presented here is intended to assist the designer at any design stage to control the noise of the final product. Methodical development of products was chosen as a basis for the structure of this document (see Clause 4). The list of design rules given in this International Technical Report is not exhaustive. Other technical measures for reducing noise at the design stage may be used if their efficacy is identical or higher. To solve problems going beyond the scope of this International Technical Report, the designer can refer to the bibliography in Annex D, which presents the general state of acoustic handbooks at the time of publication. Furthermore, reference is made to the numerous technical publications dealing with acoustical problems. 2 References IS0 3744:1994, Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane. IS0 3746:- ‘1, Acoustics - Determination of sound power levels of noise sources - Survey method employing an enveloping measurement surface over a reflecting plane. IS0 4871:- ‘), Acoustics - Declaration and verification of noise emission values of machinery and equipment. IS0 961 l:- ‘1, Acoustics - Characterization of sources of structure-borne sound with respect to the airborne sound radiation of connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted. IS0 9614-l : 1994, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part I: Measurement at discrete points. IS0 9614-Z:-? Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning. 1) To be published. SIST EN ISO 11688-1:2009
ISO/TR 11688=1:1995(E) 0 IS0 IS0 11200:-'1, Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at the work station and at other specified positions. IS0 11689:-l), Acoustics - Systematic collection and comparison of noise-emission data for machinery and equipment. 3 Definitions For the purpose of this International Technical Report the following definitions apply: 3.7 3.2 3.3 3.4 3.5 3.6 3.7 38 . 3.9 3.70 3.77 Airborne, liquid-borne and structure-borne noise: Sound propagating through air, a liquid or a solid structure, respec
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.