EN ISO 15611:2003

Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)

ISO 15611:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on previous welding experience.
In addition it gives the range of qualification and the validity.
The use of ISO 15611:2003 may be restricted by an application standard or a specification.

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Qualifizierung aufgrund von vorliegender schweißtechnischer Erfahrung (ISO 15611:2003)

Diese Norm legt die Bedingungen für die Anerkennung eines Schweißverfahrens durch vorliegende schweißtechnische Erfahrungen nach prEN ISO 15607 fest. Zusätzlich gibt sie den Geltungsbereich und die Gültigkeit wieder.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Qualification sur la base de l'expérience en soudage (ISO 15611:2003)

L'ISO 15611:2003 donne les informations nécessaires pour expliquer les exigences référencées dans l'ISO 15607:2003 concernant la qualification d'un mode opératoire de soudage sur la base de l'expérience en soudage. De plus, l'ISO 15611:2003 donne le domaine de validité de la qualification ainsi que sa durée.
L'emploi de l'ISO 15611:2003 peut être limité par une norme d'application ou une spécification.

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Odobritev na podlagi predhodnih varilskih izkušenj (ISO 15611:2003

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2003
• Withdrawal Date: 16-Jan-2024
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 15611:2004 - Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)

Relations

• Replaces: EN 288-6:1994 - Specification and approval of welding procedures for metallic materials - Part 6: Approval related to previous experience
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 15611:2024 - Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2024)
• Effective Date: 07-Oct-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Popis in kvalifikacija varilnih postopkov za kovinske materiale - Odobritev na podlagi predhodnih varilskih izkušenj (ISO 15611:2003Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Qualifizierung aufgrund von vorliegender schweißtechnischer Erfahrung (ISO 15611:2003)Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Qualification sur la base de l'expérience en soudage (ISO 15611:2003)Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)25.160.10Varilni postopki in varjenjeWelding processesICS:Ta slovenski standard je istoveten z:EN ISO 15611:2003SIST EN ISO 15611:2004en01-junij-2004SIST EN ISO 15611:2004SLOVENSKI
STANDARDSIST EN 288-6:19951DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 15611December 2003ICS 25.160.10Supersedes EN 288-6:1994English versionSpecification and qualification of welding procedures for metallicmaterials - Qualification based on previous welding experience(ISO 15611:2003)Descriptif et qualification d'un mode opératoire de soudagepour les matériaux métalliques - Qualification sur la basede l'expérience en soudage (ISO 15611:2003)Anforderung und Qualifizierung von Schweißverfahren fürmetallische Werkstoffe - Qualifizierung aufgrund vonvorliegender schweißtechnischer Erfahrung (ISO15611:2003)This European Standard was approved by CEN on 7 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 15611:2003 ESIST EN ISO 15611:2004
...