EN ISO 12543-4:2011

Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011)

ISO 12543-4:2011 specifies test methods in respect of resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building.

Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 4: Verfahren zur Prüfung der Beständigkeit (ISO 12543-4:2011)

Dieser Teil von ISO 12543 legt Prüfverfahren in Bezug auf die Beständigkeit gegenüber hohen Temperaturen,
Feuchte und Strahlung für Verbundglas und Verbund-Sicherheitsglas im Bauwesen fest.

Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 4: Méthodes d'essai concernant la durabilité (ISO 12543-4:2011)

L'ISO 12543-4:2011 spécifie des méthodes d'essai concernant la résistance aux températures élevées, à l'humidité et au rayonnement du verre feuilleté et du verre feuilleté de sécurité utilisés dans la construction.

Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - 4. del: Metode preskušanja trajnosti (ISO 12543-4:2011)

Ta del ISO 12543 določa preskusne metode v zvezi z odpornostjo proti visokim temperaturam, vlagi in sevanju za lepljeno steklo in lepljeno varnostno steklo, uporabljeno v zgradbah.

General Information

• Status: Withdrawn
• Publication Date: 14-Aug-2011
• Withdrawal Date: 21-Dec-2021
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 3 - Laminated glass
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Dec-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Mandate: M/BC/CEN/91/7 - CPD: Glass in building
• Ref Project: SIST EN ISO 12543-4:2012 - Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011)

Relations

• Replaces: EN ISO 12543-4:1998 - Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998)
• Effective Date: 20-Aug-2011
• Replaced By: EN ISO 12543-4:2021 - Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2021)
• Effective Date: 25-Sep-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12543-4:2012
01-januar-2012
1DGRPHãþD
SIST EN ISO 12543-4:1999
Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - 4. del:
Metode preskušanja trajnosti (ISO 12543-4:2011)
Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for
durability (ISO 12543-4:2011)
Glas im Bauwesen - Verbundglas und Verbund- Sicherheitsglas - Teil 4: Verfahren zur
Prüfung der Beständigkeit (ISO 12543-4:2011)
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 4:
Méthodes d'essai concernant la durabilité (ISO 12543-4:2011)
Ta slovenski standard je istoveten z: EN ISO 12543-4:2011
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN ISO 12543-4:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12543-4:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 12543-4:2012


EUROPEAN STANDARD
EN ISO 12543-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2011
ICS 81.040.20 Supersedes EN ISO 12543-4:1998
English Version
Glass in building - Laminated glass and laminated safety glass -
Part 4: Test methods for durability (ISO 12543-4:2011)
Verre dans la construction - Verre feuilleté et verre feuilleté Glas im Bauwesen - Verbundglas und Verbund-
de sécurité - Partie 4: Méthodes d'essai concernant la Sicherheitsglas - Teil 4: Verfahren zur Prüfung der
durabilité (ISO 12543-4:2011) Beständigkeit (ISO 12543-4:2011)
This European Standard was approved by CEN on 6 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12543-4:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12543-4:2012
EN ISO 12543-4:2011 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 12543-4:2012
EN ISO 12543-4:2011 (E)
Foreword
This document (EN ISO 12543-4:2011) has been prepared by Technical Committee ISO/TC 160 "Glass in
building" in collaboration with Technical Committee CEN/TC 129 “Glass in building” the secretariat of which is
held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12543-4:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12543-4:2011 has been approved by CEN as a EN ISO 12543-4:2011 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 12543-4:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 12543-4:2012

INTERNATIONAL ISO
STANDARD 12543-4
Second
...