EN 12348:2000+A1:2009

Core drilling machines on stand - Safety

This European Standard applies to core drilling machines on transportable stands equipped with a diamond
core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and
similar mineral materials in a stationary position where the power for the tool rotation is supplied by an
electrical, hydraulic, pneumatic or internal combustion prime motor.
The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic
means.
This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when
used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard
specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard does not apply to:
- percussive or rotary-percussive rock drills either mounted or unmounted;
- hand held power drills;
- hydraulic or pneumatic power supply sources;
- mobile undercarriages to which machines can be fitted.
This European Standard does not apply to machinery covered by EN 791:1995.
This European Standard covers electrical hazards by making reference to relevant European Standards (see
5.2).
Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of machinery and
that are dealt with in standards for common use are not covered by this European Standard. Reference to
pertinent standards of this kind is made where such standards are applicable and so far as is necessary.
In this European Standard, core drilling machines on a stand are called "machines" and diamond core drill bits
are called “tools”.
NOTE The term "diamond" is used as a generic word which covers all varieties of abrasive products such as
diamond, borum nitride.
This European Standard applies primarily to machines which are manufactured after the date of approval of
the standard by CEN.

Kernbohrmaschinen auf Ständer - Sicherheit

Diese Europäische Norm gilt für Kernbohrmaschinen auf transportablem Ständer, die mit einer Diamantkernbohrkrone
und im Allgemeinen mit einer Vorrichtung für die Wasserzufuhr ausgestattet und für das Bohren
von Löchern in Stein, Beton und ähnliche mineralische Materialien in stationärer Position vorgesehen sind.
Die Antriebsenergie für die Drehbewegung des Werkzeugs kann durch elektrischen, hydraulischen, pneumatischen
oder Verbrennungsmotor zur Verfügung gestellt werden.
Die Vorschubbewegung des Bohrkopfes und der Bohrkrone kann manuell, mechanisch oder hydraulisch
erfolgen.
Diese Europäische Norm behandelt alle signifikanten Gefährdungen, die auf Kernbohrmaschinen auf Ständer
zutreffen, wenn sie bestimmungsgemäß und entsprechend den Empfehlungen des Herstellers verwendet
werden (siehe Abschnitt 4). Diese Norm spezifiziert die entsprechenden technischen Maßnahmen zur Beseitigung
oder Verminderung der Risiken, die von den signifikanten Gefährdungen ausgehen.
Diese Norm gilt nicht für:
- Schlag- oder Drehschlagbohrmaschinen für Stein mit oder ohne Bohrgestell;
- handgeführte motorgetriebene Bohrmaschinen;
- hydraulische oder pneumatische Energiequellen;
- Fahrgestelle, auf die Kernbohrmaschinen aufgebaut werden können.
Diese Europäische Norm gilt nicht für Maschinen, die in EN 791:1995 behandelt werden.
Diese Europäische Norm behandelt elektrischen Gefährdungen durch Verweis auf relevante Europäische
Normen (siehe 5.2).
Die Gefährdungen, die für alle mechanischen, elektrischen, hydraulischen und anderen Einrichtungen von
Maschinen relevant sind und in entsprechenden allgemeinen Normen behandelt werden, umfasst diese
Europäische Norm nicht. Soweit erforderlich, wird auf anwendbare Normen dieser Art verwiesen.
In dieser Europäischen Norm werden Kernbohrmaschinen auf Ständer als „Maschinen“ und Diamantkernbohrkronen
als „Werkzeug“ bezeichnet.

Foreuses à béton (carotteuses) sur colonne - Sécurité

Stabilni vrtalni stroji - Varnost

General Information

• Status: Published
• Publication Date: 31-Mar-2009
• ICS: 25.080.40 - Drilling machines
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 6 - Machines and equipment to process building materials (portable, hand-guided, support-mounted, on rails or self-propelled) - Safety
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 19-Dec-2017
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 12348:2000+A1:2009 - Core drilling machines on stand - Safety

Relations

• Merged From: EN 12348:2000/prA1 - Core drilling machines on stand - Safety
• Effective Date: 18-Jan-2023
• Merged From: EN 12348:2000 - Core drilling machines on stand - Safety
• Effective Date: 18-Jan-2023
• Revised: prEN 12348 - Core drilling machines on stand - Safety
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stabilni vrtalni stroji - VarnostKernbohrmaschinen auf Ständer - SicherheitForeuses à béton (carotteuses) sur colonne - SécuritéCore drilling machines on stand - Safety25.080.40VrtalnikiDrilling machinesICS:Ta slovenski standard je istoveten z:EN 12348:2000+A1:2009SIST EN 12348:2000+A1:2009en,fr01-junij-2009SIST EN 12348:2000+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12348:2000+A1
April 2009 ICS 25.080.40 Supersedes EN 12348:2000English Version
Core drilling machines on stand - Safety
Foreuses à béton (carotteuses) sur colonne - Sécurité
Kernbohrmaschinen auf Ständer - Sicherheit This European Standard was approved by CEN on 26 June 2000 and includes Amendment 1 approved by CEN on 1 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12348:2000+A1:2009: ESIST EN 12348:2000+A1:2009

Noise test code - Grade 2 of accuracy. 20Annex B (normative)
Pictograms . 23Annex C (normative)
Verification of surface temperature . 24Annex D (normative)
!!!!Vibration test code . 25Annex ZA (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""" . 29Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 30Bibliography . 31 SIST EN 12348:2000+A1:2009
...