EN 13605:2013

Copper and copper alloys - Copper profiles and profiled wire for electrical purposes

This European Standard specifies the composition, property requirements including electrical properties, and tolerances on dimensions and form for copper profiles and profiled wire for electrical purposes, which would fit within a circumscribing circle of maximum 180 mm diameter.
The sampling procedures, the test methods for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.

Kupfer und Kupferlegierungen - Profile und profilierte Drähte aus Kupfer für die Anwendung in der Elektrotechnik

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften, einschließlich elektrischer Eigenschaften, Grenzabmaße und Formtoleranzen von Profilen und profilierten Drähten für die Anwendung in der Elektrotechnik mit einem Durchmesser des umschreibenden Kreises von maximal 180 mm fest.
Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen der Norm und die Lieferbedingungen sind ebenfalls festgelegt.

Cuivre et alliages de cuivre - Profilés et fils profilés en cuivre pour usages électriques

La présente Norme européenne spécifie la composition, les exigences relatives aux propriétés, y compris les
propriétés électriques et les tolérances de dimensions et de forme des profilés et fils profilés en cuivre pour
usages électriques qui sont compris dans un cercle circonscrit d'un diamètre maximum de 180 mm.
Les procédures d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux exigences de
la présente norme et les conditions de livraison sont également spécifiées.

Baker in bakrove zlitine - Profili in profilirana žica iz bakra za uporabo v elektrotehniki

Ta evropski standard določa sestavo, zahteve glede značilnosti, vključno z električnimi lastnostmi, ter odstopanja glede dimenzij in oblike za profile in profilirano žico iz bakra za uporabo v elektrotehniki, ki se prilega odprtini z največjim premerom 180 mm. Določeni so tudi postopki vzorčenja, preskusne metode za preverjanje skladnosti z zahtevami tega evropskega standarda in dobavni pogoji.

General Information

• Status: Withdrawn
• Publication Date: 18-Jun-2013
• Withdrawal Date: 18-May-2021
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-May-2021
• Ref Project: SIST EN 13605:2013 - Copper and copper alloys - Copper profiles and profiled wire for electrical purposes

Relations

• Replaces: EN 13605:2002/AC:2004 - Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
• Effective Date: 26-Jun-2013
• Replaces: EN 13605:2002 - Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
• Effective Date: 28-Nov-2009
• Replaced By: EN 13605:2021 - Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
• Effective Date: 26-May-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Profili in profilirana žica iz bakra za uporabo v elektrotehnikiCopper and copper alloys - Copper profiles and profiled wire for electrical purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 13605:2013SIST EN 13605:2013en,de01-september-2013SIST EN 13605:2013SLOVENSKI
STANDARDSIST EN 13605:2004/AC:2005SIST EN 13605:20041DGRPHãþD



SIST EN 13605:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13605
June 2013 ICS 77.150.30 Supersedes EN 13605:2002English Version
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
Cuivre et alliages de cuivre - Profilés et fils profilés en cuivre pour usages électriques
Kupfer und Kupferlegierungen - Profile und profilierte Drähte aus Kupfer für die Anwendung in der ElektrotechnikThis European Standard was approved by CEN on 25 April 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13605:2013: ESIST EN 13605:2013



EN 13605:2013 (E) 2 Contents Page Foreword .4 1 Scope .6 2 Normative references .6 3 Terms and definitions .6 4 Designations .7 4.1 Material .7 4.2 Material condition .7 4.3 Product .7 5 Ordering information .8 6 Requirements . 10 6.1 Composition . 10 6.2 Mechanical properties . 10 6.3 Electrical properties . 10 6.4 Freedom from hydrogen embrittlement . 10 6.5 Drawings . 10 6.6 Dimensions and tolerances . 10 6.7 Form of delivery of profiled wire .
...