EN 12697-13:2026
(Main)Bituminous mixtures - Test methods - Part 13: Temperature measurement
- Abstract
This document describes a test method for measuring the temperature of asphalt mixtures after mixing and during storage, transportation and laying. This document includes the contact temperature-measuring device and the non-contact temperature-measuring device (infrared-thermometer). In cases of dispute, the reference method uses the contact temperature-measuring device.
- Status
- Not Published
- Publication Date
- 22-Dec-2026
- Technical Committee
- CEN/TC 227 - Road materials
- Drafting Committee
- CEN/TC 227/WG 1 - Bituminous mixtures
- Current Stage
- 5060 - Closure of Vote - Formal Approval
- Start Date
- 05-Nov-2026
- Due Date
- 06-Apr-2026
- Completion Date
- 05-Nov-2026
EN 12697-13:2026 is a CEN standard for bituminous mixtures, part of the EN 12697 series on test methods. It specifies how to measure the temperature of asphalt mixtures after mixing and during storage, transportation and laying, using either a contact temperature-measuring device or an infrared-thermometer. In dispute situations, the document uses the contact method as the reference method.
What does EN 12697-13:2026 specify?
EN 12697-13:2026 specifies a practical test method for checking asphalt mixture temperature at different stages of handling and placement. It is written for measurement in a lorry, in a heap, after laying and before or during rolling, and in a paver hopper.
The document is organized into scope, normative references, terms and definitions, principle, apparatus, procedure, test report and precision. The body of the standard is split between the contact method and the infrared method, which helps users choose the right procedure for the situation they face on site.
What are the key requirements of EN 12697-13:2026?
EN 12697-13:2026 focuses on getting repeatable temperature readings from hot asphalt, then reporting the average of several readings. The practical message is simple: use a suitable instrument, take measurements at defined locations, and record the mean value.
Contact temperature-measuring device
Clause 5.1 requires the contact temperature-measuring device and probe to be suitable for the measurement location. The probe must be at least 200 mm long, have a known response time for the temperature interval being measured, and measure to the nearest 1 °C with a maximum permissible error of 2 °C. The device should also have low thermal capacity so it does not cool the material too much during measurement.
Clause 6.1.1 says the probe should be conditioned by heating it to approximately the material temperature before the first reading. In practice, this reduces the risk of a low reading caused by a cold probe.
Clause 6.1.2 covers lorry loads. The probe goes at least 100 mm into the load, with at least four measurements along each side and at least 500 mm from the edges. The result is the average of all readings, and the method should preferably be done from a sampling platform for safety.
Clause 6.1.3 covers material after laying and before or during rolling. At least four measurements are taken close to the mid-depth of the layer, and the average is reported. The clause also warns that, in rolling areas, users must pay close attention to moving compaction plant.
Clause 6.1.4 covers heaps. The probe goes at least 100 mm into the material, with at least four measurements around the accessible perimeter and at least 300 mm from the base. Again, the average of all readings is reported.
Infrared-thermometer
Clause 5.2 requires the infrared-thermometer to detect radiation in the 2 µm to 14 µm range and to record surface thermal radiation. Accurate use depends on the measuring angle, distance and emissivity of the material. The note in the clause gives an emissivity range of 0,90 to 0,98 as appropriate for many mixtures.
Clause 6.2.2 requires a comparison measurement with a calibrated contact temperature-measuring device before a set of measurements. The two devices are used on the same asphalt sample, and the emissivity setting is adjusted until they agree. In practice, this is how the infrared-thermometer is matched to the material being measured.
Clause 6.2.3 gives the measurement setup. The thermometer is held at an angle of 50° to 90° to the surface, with the distance chosen so the full measuring area stays within the field of view. For lorries and heaps, at least four readings are taken in the same general pattern as the contact method. For a paver hopper, the device is aimed at the moving material stream at the auger or slat conveyor.
What changed in EN 12697-13:2026 from the previous edition?
The draft text used for this standard states that it supersedes EN 12697-13:2017. It also states two technical changes: the wording for the contact device accuracy was updated in Clause 5.1, and the information to be reported in Clause 7 was amended.
Who uses EN 12697-13:2026?
EN 12697-13:2026 is used by asphalt producers, road construction contractors, site supervisors, quality managers and testing laboratories that need to check mixture temperature during production, transport, laying and compaction. It is especially relevant where temperature affects workability, timing and safe handling on site.
What does the EN 12697-13:2026 document contain?
EN 12697-13:2026 contains the measurement principle for both contact and infrared methods, detailed apparatus requirements, and step-by-step procedures for the main field situations. It also includes the contents required in the test report and a precision clause.
The report clause asks users to identify the document, the sample, the measurement site, the type of device used and the average result in °C. That makes the result traceable and easier to compare between sites or organisations.
The precision clause states that there is no precision statement for either device. For users, that means the standard gives a method for measuring and reporting temperature, but not a precision estimate to rely on for performance comparison.
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 21-Feb-2024
Get Certified
Connect with accredited certification bodies for this standard

Zavod za gradbeništvo Slovenije (ZAG) - Inšpekcija
ZAG inspection body for construction products, structures, and materials.
Sponsored listings
Frequently Asked Questions
EN 12697-13:2026 is a draft published by the European Committee for Standardization (CEN). Its full title is "Bituminous mixtures - Test methods - Part 13: Temperature measurement". This standard covers: This document describes a test method for measuring the temperature of asphalt mixtures after mixing and during storage, transportation and laying. This document includes the contact temperature-measuring device and the non-contact temperature-measuring device (infrared-thermometer). In cases of dispute, the reference method uses the contact temperature-measuring device.
This document describes a test method for measuring the temperature of asphalt mixtures after mixing and during storage, transportation and laying. This document includes the contact temperature-measuring device and the non-contact temperature-measuring device (infrared-thermometer). In cases of dispute, the reference method uses the contact temperature-measuring device.
EN 12697-13:2026 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12697-13:2026 has the following relationships with other standards: It is inter standard links to CEN ISO/TS 5387:2024, CEN ISO/TS 23359:2025, CEN ISO/TS 24672:2024, EN 12697-13:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12697-13:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12697-13:2025
01-marec-2025
Bitumenske zmesi - Preskusne metode - 13. del: Merjenje temperature
Bituminous mixtures - Test methods - Part 13: Temperature measurement
Asphalt - Prüfverfahren - Teil 13: Temperaturmessung
Mélanges Bitumineux - Méthodes ďessai - Partie 13: Mesure de la température
Ta slovenski standard je istoveten z: prEN 12697-13
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 12697-13:2025 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 12697-13:2025
oSIST prEN 12697-13:2025
DRAFT
EUROPEAN STANDARD
prEN 12697-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2025
ICS 93.080.20 Will supersede EN 12697-13:2017
English Version
Bituminous mixtures - Test methods - Part 13:
Temperature measurement
Mélanges Bitumineux - Méthodes dessai - Partie 13: Asphalt - Prüfverfahren - Teil 13: Temperaturmessung
Mesure de la température
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-13:2025 E
worldwide for CEN national Members.
oSIST prEN 12697-13:2025
prEN 12697-13:2024(E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
4.1 Contact Temperature Measuring Thermometer . 4
4.2 Infrared-thermometer . 4
5 Apparatus . 4
5.1 Contact temperature measuring device . 4
5.2 Infrared-thermometer . 5
6 Procedure . 5
6.1 Contact Measuring Device. 5
6.1.1 Conditioning of instrument . 5
6.1.2 Measurement of temperature in a lorry . 5
6.1.3 Measurement material temperature after it has been laid and before or during rolling . 5
6.1.4 Measurements of temperature in a heap . 5
6.2 Infrared-thermometer . 6
6.2.1 General. 6
6.2.2 Comparison measurement . 6
6.2.3 Temperature measurement . 6
7 Test Report . 7
8 Precision . 7
oSIST prEN 12697-13:2025
prEN 12697-13:2024 (E)
European foreword
This document (prEN 12697-13:2024) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12697-13:2017.
prEN 12697-13:2024 includes the following significant technical changes with respect to
EN 12697-13:2017:
— [ 5.1], (3.1.1 and 3.1.2 in EN 12697-13:2017), the wording: “The temperature measuring device shall
have the capacity to measure the temperature with an accuracy of ± 2 °C”, amended to read: “The
contact temperature measuring device shall be capable to measure the temperature to the nearest 1
°C with a maximum permissible error of 2 °C.”;
— [Clause 7], (Clause 5 in EN 12697-13:2017), information to be reported amended.
A list of all parts in the EN 12697 series, published under general title Bituminous mixtures - Test methods
can be found on the CEN website: https://www.cencenelec.eu/.
oSIST prEN 12697-13:2025
prEN 12697-13:2024(E)
1 Scope
This document describes a test method for measuring the temperature of asphalt mixtures after mixing
and during storage, transportation and laying. This document includes the contact temperature-
measuring device and the non-contact temperature-measuring device (infrared-thermometer). In cases
of dispute, the refence method shall be using the contact temperature measuring device.
2 Normative references
There are no
...



