CEN ISO/TR 7250-2:2011/A1:2013

Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from national populations (ISO/TR 7250-2:2010/Amd 1:2013)

ISO/TR 7250-2:2010 provides statistical summaries of body measurements together with database background information for working age people in the national populations of individual ISO member bodies. The data are intended for use in conjunction with ISO standards for equipment design and safety, which require body measurement input, wherever national specificity of design parameters is required.

Wesentliche Maße des menschlichen Körpers für die technische Gestaltung - Teil 2: Anthropometrische Datenbanken einzelner nationaler Bevölkerungen (ISO/TR 7250-2:2010/Amd 1:2013)

Définitions des mesures de base du corps humain pour la conception technologique - Partie 2: Résumés statistiques des mesurages du corps de populations nationales (ISO/TR 7250-2:2010/Amd 1:2013)

Osnovne mere človeškega telesa za tehnološko načrtovanje - 2. del: Statistični povzetek telesnih mer nacionalnih populacij - Dopolnilo A1 (ISO/TR 7250-2:2010/Amd 1:2013)

ISO/TR 7250-2:2010 podaja statistične povzetke telesnih mer skupaj z zbirkami podatkov sekundarnih informacij za ljudi v delovni dobi v populacijah na nacionalni ravni posameznih članov ISO. Podatki so namenjeni uporabi skupaj s standardi ISO za načrtovanje in varnost opreme, ki zahtevajo vnos telesnih mer, kadar se zahteva nacionalna posebnost parametrov načrtovanja.

General Information

• Status: Withdrawn
• Publication Date: 16-Apr-2013
• Withdrawal Date: 09-Apr-2024
• ICS: 13.180 - Ergonomics
• Technical Committee: CEN/TC 122 - Ergonomics
• Drafting Committee: CEN/TC 122/WG 1 - Anthropometry
• Ref Project: SIST-TP CEN ISO/TR 7250-2:2011/A1:2013 - Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from national populations (ISO/TR 7250-2:2010/Amd 1:2013)

Relations

• Amends: CEN ISO/TR 7250-2:2011 - Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations (ISO/TR 7250-2:2010)
• Effective Date: 17-Oct-2012

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2013
2VQRYQHPHUHþORYHãNHJDWHOHVD]DWHKQRORãNRQDþUWRYDQMHGHO6WDWLVWLþQL
SRY]HWHNWHOHVQLKPHUQDFLRQDOQLKSRSXODFLM'RSROQLOR$,6275
$PG
Basic human body measurements for technological design - Part 2: Statistical
summaries of body measurements from national populations (ISO/TR 7250-2:2010/Amd
1:2013)
Wesentliche Maße des menschlichen Körpers für die technische Gestaltung - Teil 2:
Anthropometrische Datenbanken einzelner nationaler Bevölkerungen (ISO/TR 7250-
2:2010/Amd 1:2013)
Définitions des mesures de base du corps humain pour la conception technologique -
Partie 2: Résumés statistiques des mesurages du corps de populations nationales
(ISO/TR 7250-2:2010/Amd 1:2013)
Ta slovenski standard je istoveten z: CEN ISO/TR 7250-2:2011/A1:2013
ICS:
13.180 Ergonomija Ergonomics
SIST-TP CEN ISO/TR 7250- en,fr,de
2:2011/A1:2013
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT
CEN ISO/TR 7250-
2:2011/A1
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
April 2013
ICS 13.180
English Version
Basic human body measurements for technological design - Part
2: Statistical summaries of body measurements from national
populations (ISO/TR 7250-2:2010/Amd 1:2013)
Définitions des mesures de base du corps humain pour la Wesentliche Maße des menschlichen Körpers für die
conception technologique - Partie 2: Résumés statistiques technische Gestaltung - Teil 2: Anthropometrische
des mesurages du corps de populations nationales Datenbanken einzelner nationaler Bevölkerungen (ISO/TR
(ISO/TR 7250-2:2010/Amd 1:2013) 7250-2:2010/Amd 1:2013)
This amendment A1 modifies the European Standard CEN ISO/TR 7250-2:2011; it was approved by CEN on 7 April 2013.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 7250-2:2011/A1:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (CEN ISO/TR 7250-2:2011/A1:2013) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 “Ergonomics” the secretariat of which is
held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of ISO/TR 7250-2:2010/Amd 1:2013 has been approved by CEN as CEN ISO/TR 7250-
2:2011/A1:2013 without any modification.

TECHNICAL ISO/TR
REPORT 7250-2
First edition
2010-12-15
AMENDMENT 1
2013-04-15
Basic human body measurements for
technological design —
Part 2:
Statistical summaries of body
measurements from national
populations
AMENDMENT 1
Définitions des mesures de base du corps humain pour la conception
technologique —
Partie 2: Résumés statistiques des mesurages du corps de
populations nationales
AMENDEMENT 1
Reference number
ISO/TR 7250-2:2010/Amd.1:2013(E)
©
ISO 2013
ISO/TR 7250-2:2010/Amd.1:2013(E)

© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO/TR 7250-2:2010/Amd.1:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
The committee responsible for this document is ISO/TC 159, Ergonomics, Subcommittee SC 3,
Anthropometry and biomechanics. Amendment 1 to ISO/TR 7250-2:2010 refines the title of ISO/TR 7250-2
in order to make clear that the statistical summaries presented by ISO/TR 7250-2 are of the national
populations of countries whose national standards bodies are ISO members. It adds a statistical
summary for the People’s Republic of China, updates or corrects other national statistics and references,
and provides a web address from which the most recent data can be accessed by users of ISO/TR 7250-2.
ISO 7250 consists of the following parts, under the general title Basic human body measurements for
technological design:
— Part 1: Body measurement definitions and landmarks
— Part 2: Statistical summaries of body measurements from national populations
ISO/TR 7250-2:2010/Amd.1:2013(E)
Basic human body measurements for technological design —
Part 2:
Statistical summaries of body measurements from
national populations
AMENDMENT 1
Cover page and page 1
Change the part title of this part of ISO 7250 from Statistical summaries of body measurements from
individual ISO populations to
Statistical summaries of body measurements from national populations.
Page 1, Clause 2
Add the year of publication, 2010, to the normative reference ISO 20685.
Page 5, Clause 7
Insert the following new Clause 7, consequently modifying the numbering of succeeding clauses/subclauses
(the former Clause 7 becomes Clause 8, 7.1 becomes 8.1, etc.).
Modify the title of what now becomes Clause 8 from “Statistics for ISO member bodies” to “Statistics for
ISO national members”. Throughout, delete the phrase “ISO member body” from the subclause headings
(8.1, etc.), leaving the names of the actual countries.
7 Up-to-date data
An online version of this Technical Report — updated as new data becomes available (and with a text
document giving the update history) — can be accessed at the following web address:
http://standards.iso.org
...