Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions

This European Standard describes a test method for measuring a quantity representative of the intrinsic characteristics of sound reflection from road noise reducing devices: the reflection index.
The test method is intended for the following applications:
- determination of the intrinsic characteristics of sound reflection of noise reducing devices to be installed along roads, to be measured either on typical installations alongside roads or on a relevant sample section;
- determination of the in situ intrinsic characteristics of sound reflection of noise reducing devices in actual use;
- comparison of design specifications with actual performance data after the completion of the construction work;
- verification of the long-term performance of noise reducing devices (with a repeated application of the method).
The test method is not intended for the following applications:
- determination of the intrinsic characteristics of sound reflection of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches.
Results are expressed as a function of frequency, in one-third octave bands between 100 Hz and 5 kHz. If it is not possible to get valid measurements results over the whole frequency range indicated, the results shall be given in a restricted frequency range and the reasons of the restriction(s) shall be clearly reported.

Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 5: Produktspezifische Merkmale - In-situ-Werte der Schallreflexion in gerichteten Schallfeldern

Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 5: Caractéristiques intrinsèques - Valeurs in situ de réflexion acoustique dans des conditions de champ acoustique direct

Protihrupne ovire za cestni promet - Preskusna metoda za ugotavljanje akustičnih lastnosti - 5. del: Bistvene lastnosti - Terenske vrednosti odboja zvoka z uporabo usmerjenega zvočnega polja

Ta dokument opisuje preskusno metodo za merjenje količine, ki predstavlja bistvene lastnosti na področju odboja zvoka od protihrupnih ovir za cestni promet: indeks odboja.
Preskusna metoda je namenjena:
– ugotavljanju bistvenih lastnosti na področju odboja zvoka od obcestnih protihrupnih ovir, ki se merijo na običajnih mestih namestitve ob cesti ali na ustreznem vzorčnem delu;
– ugotavljanju bistvenih lastnosti na področju odboja zvoka od protihrupnih ovir med dejansko uporabo na mestu uporabe;
– primerjavi specifikacij zasnove s podatki o dejanskih lastnostih po koncu izgradnje;
– preverjanje dolgoročnih lastnosti protihrupnih ovir (z večkratno izvedbo metode).
Preskusna metoda ni namenjena:
– ugotavljanju bistvenih lastnostih za odboj zvoka od protihrupnih naprav za namestitev v odmevnih pogojih, npr. v predorih.
Rezultati so izraženi kot funkcija frekvence v tretjinskih oktavnih pasovih med 100 Hz in 5 kHz. Če ni mogoče dobiti veljavnih rezultatov meritev za celo opredeljeno frekvenčno območje, se rezultati navedejo za omejeno frekvenčno območje, razlogi za omejitev območja pa se jasno opredelijo.

General Information

Status
Published
Publication Date
29-Mar-2016
Withdrawal Date
29-Sep-2016
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Mar-2016
Due Date
18-Jun-2016
Completion Date
30-Mar-2016

Relations

Buy Standard

Standard
EN 1793-5:2016 - BARVE
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1793-5:2016
01-julij-2016
1DGRPHãþD
SIST-TS CEN/TS 1793-5:2004
3URWLKUXSQHRYLUH]DFHVWQLSURPHW3UHVNXVQDPHWRGD]DXJRWDYOMDQMHDNXVWLþQLK
ODVWQRVWLGHO%LVWYHQHODVWQRVWL7HUHQVNHYUHGQRVWLRGERMD]YRND]XSRUDER
XVPHUMHQHJD]YRþQHJDSROMD
Road traffic noise reducing devices - Test method for determining the acoustic
performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under
direct sound field conditions
Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen
Eigenschaften - Teil 5: Produktspezifische Merkmale - In-situ-Werte der Schallreflexion
in gerichteten Schallfeldern
Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination
de la performance acoustique - Partie 5: Caractéristiques intrinsèques - Valeurs in situ
de réflexion acoustique dans des conditions de champ acoustique direct
Ta slovenski standard je istoveten z: EN 1793-5:2016
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST EN 1793-5:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1793-5:2016

---------------------- Page: 2 ----------------------

SIST EN 1793-5:2016


EN 1793-5
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2016
EUROPÄISCHE NORM
ICS 17.140.30; 93.080.30 Supersedes CEN/TS 1793-5:2003
English Version

Road traffic noise reducing devices - Test method for
determining the acoustic performance - Part 5: Intrinsic
characteristics - In situ values of sound reflection under
direct sound field conditions
Dispositifs de réduction du bruit du trafic routier - Lärmschutzvorrichtungen an Straßen - Prüfverfahren
Méthode d'essai pour la détermination de la zur Bestimmung der akustischen Eigenschaften - Teil
performance acoustique - Partie 5: Caractéristiques 5: Produktspezifische Merkmale - In-situ-Werte der
intrinsèques - Valeurs in situ de réflexion acoustique Schallreflexion in gerichteten Schallfeldern
dans des conditions de champ acoustique direct
This European Standard was approved by CEN on 23 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1793-5:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1793-5:2016
EN 1793-5:2016 (E)
Contents
European foreword . 4
Introduction . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Symbols and abbreviations . 13
5 Sound reflection index measurements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.