iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12416-1:2001/A1:2004

(Amendment)

Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components

Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components

This European standard specifies requirements for materials, construction and performance of components intended for use in powder firefighting systems complying with EN 12416-2, which covers gas container systems with a maximum working pressure not exceeding 25 bar at 20°C. It does not cover stored pressure systems, pre-engineerd systems, powder hose lines and monitor systems. Methods of test are also given.

Ortsfeste Brandbekämpfungsanlagen - Pulverlöschanlagen - Teil 1: Anforderungen und Prüfverfahren für Bauteile

Installations fixes de lutte contre l'incendie - Systèmes d'extinction à poudre - Partie 1: Exigences et méthodes d'essais des éléments constitutifs

Vgrajeni gasilni sistemi - Sistemi s praškom - 1. del: Zahteve in preskusne metode za sestavne dele

General Information

Status
Withdrawn
Publication Date
18-May-2004
Withdrawal Date
19-Jun-2007
ICS
13.220.10 - Fire-fighting
Technical Committee
CEN/TC 191 - Fixed firefighting systems
Drafting Committee
CEN/TC 191 - Fixed firefighting systems
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Jun-2007
Completion Date
20-Jun-2007
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/109 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression products
Ref Project
SIST EN 12416-1:2001/A1:2004 - Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components

Relations

Merged Into
EN 12416-1:2001+A2:2007 - Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
Effective Date
18-Jan-2023
Amends
EN 12416-1:2001 - Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components
Effective Date
22-Dec-2008

Buy Standard

EN 12416-1:2001/A1:2004EN 12416-1:2001/A1:2004
PreviousNext
Amendment
EN 12416-1:2001/A1:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2004
Vgrajeni gasilni sistemi - Sistemi s praškom - 1. del: Zahteve in preskusne metode
za sestavne dele
Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for
components
Ortsfeste Brandbekämpfungsanlagen - Pulverlöschanlagen - Teil 1: Anforderungen und
Prüfverfahren für Bauteile
Installations fixes de lutte contre l'i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 21805:2023(Main)
Guidance and recommendations on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (ISO 21805:2023)
SIST EN ISO 21805:2023

This document gives guidelines for fulfilling the requirements contained in ISO 6183:2022, 6.4.1 and 7.4.1 and ISO 14520‑1:2023, 5.2.1 h) and 5.3 h), in respect to over- and under-pressurization venting and post-discharge extract.
It considers the design, selection and installation of vents to safeguard the structural integrity of enclosures protected by fixed gaseous extinguishing systems and the post-discharge venting provisions where used.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1568-3:2018(Main)
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids
SIST EN 1568-3:2018

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking.
WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product.
Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as medium and/or high expansion foams, and for application at low expansion to water-miscible liquids.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1568-4:2018(Main)
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
SIST EN 1568-4:2018

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-miscible liquids. Requirements are also specified for marking.
IMPORTANT - The fire performance is tested using acetone and isopropanol as the fuel, which also forms the basis for the performance classification. However, there are a large number of water-miscible liquids which have more or less different properties to acetone and isopropanol. It has been shown by tests using other fuels that the performance of various foams can differ considerably. Examples of such fuel is Methyl Ethyl Ketone (MEK). It is therefore essential that the user checks for any unfavourable or unacceptable loss of efficiency when the foam is used against fires in any other water-miscible fuels than acetone and isopropanol respectively. The fire test conditions and procedure given in H.2 can be used in order to achieve results comparative with acetone and isopropanol respectively and related requirements.
It is also essential for the user to note that other fuel depths and methods of application than those specified in H.2 can cause considerable loss of efficiency and these matters should be carefully considered by the user when assessing the suitability for particular applications.
WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product.
NOTE   Some concentrates conforming to this part of the EN 1568 series can also conform to other parts and therefore can also be suitable for application as medium and/or high expansion foams.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1568-1:2018(Main)
Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
SIST EN 1568-1:2018

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of medium expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking.
WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product.
Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as low and/or high expansion foams.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1568-2:2018(Main)
Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids
SIST EN 1568-2:2018

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of high expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking.
WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product.
Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as low and/or medium expansion foams.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-1:2012(Main)
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
SIST EN 671-1:2012

This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with semi-rigid hose for installation in buildings, permanently connected to a water supply, for use by the occupants.
It also provides requirements on evaluation of conformity and marking of these products.
Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements can be necessary in such cases.
This European Standard is applicable to both manual and automatic fire hose reels for installation with and without cabinets.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-2:2012(Main)
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
SIST EN 671-2:2012

This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with lay-flat hose for installation in buildings, permanently connected to a water supply, for use by the occupants.
Furthermore, it provides also for requirements on evaluation of conformity and marking of these products.
Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements may be necessary in such cases.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 615:2009(Main)
Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders)
SIST EN 615:2009

This European Standard is applicable to fire extinguishing powders for fire classes A, B and C. It specifies, by means of defined test methods, minimum requirements for the chemical and physical properties and minimum extinguishing capabilities. Requirements are also specified for the information and data to be given by the supplier.
This European Standard is not applicable to powders for class D fires.
NOTE 1   The classification of fires is given in EN 2 [1].
NOTE 2   Some countries have national standards for class D powders.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-3:2009(Main)
Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose
SIST EN 671-3:2009

This European Standard specifies requirements for inspection and maintenance of hose reels and hose systems such that they continue to provide the service for which they were manufactured, supplied or installed i.e. to ensure a first emergency intervention to fight a fire before more powerful means can be implemented.
This European Standard is applicable to hose reel and hose system installations in all types of buildings irrespective of the nature of use of the buildings.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12094-7:2000(Main)
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
SIST EN 12094-7:2001

This European Standard specifies requirements and test methods for nozzles which introduce the extinguishing agent into a CO 2 protected zone. The design of the nozzles will influence discharge rate and thus the pressure drop in the piping network. The
extinguishing agent normally arrives at the nozzle in two-phase flow form (liquid-gaseous mixture). It expands into the protected volume to form a gas or a gas-and-dry-ice mixture depending on the nozzle type. This standard should only be used as guidance for testing nozzles which work on different principles.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day