EN 12311-2:2010

Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing

This European Standard specifies test methods for the determination of the tensile properties of plastic and rubber sheets for roof waterproofing.

Abdichtungsbahnen - Bestimmung des Zug-Dehnungsverhaltens - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen

Diese Europäischen Norm legt Prüfverfahren zur Bestimmung der Zugeigenschaften von Kunststoff  und Elastomer¬bahnen zur Dachabdichtung fest.

Feuilles souples d'étanchéité - Détermination des propriétés en traction - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères

La présente Norme européenne décrit des méthodes d'essai pour la détermination des propriétés en traction des feuilles d’étanchéité de toiture plastiques et élastomères.

Hidroizolacijski trakovi - Določevanje nateznih lastnosti - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh

Ta evropski standard določa metodo za določevanje odpornosti proti rezanju spojev med dvema sosednjima trakovoma enakih polimernih ali elastomernih trakov za tesnjenje streh.

General Information

• Status: Withdrawn
• Publication Date: 06-Jul-2010
• Withdrawal Date: 28-May-2013
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/SC 2 - Synthetic sheets
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-May-2013
• Completion Date: 29-May-2013
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: SIST EN 12311-2:2010 - Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing

Relations

• Replaces: EN 12311-2:2000 - Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
• Effective Date: 10-Jul-2010
• Replaced By: EN 12311-2:2013 - Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
• Effective Date: 07-May-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung des Zug- Dehnungsverhaltens - Teil 2: Kunststoff- und Kautschukbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination des propriétés en traction - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomèresFlexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 12311-2:2010SIST EN 12311-2:2010en,fr,de01-oktober-2010SIST EN 12311-2:2010SLOVENSKI
STANDARDSIST EN 12311-2:20011DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12311-2
July 2010 ICS 91.100.50 Supersedes EN 12311-2:2000English Version
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
Feuilles souples d'étanchéité - Détermination des propriétés en traction - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères
Abdichtungsbahnen - Bestimmung des Zug-Dehnungsverhaltens - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen This European Standard was approved by CEN on 29 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12311-2:2010: ESIST EN 12311-2:2010
...