iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1648-1:2018

(Main)

Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans

Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of caravans. It covers the design and integration of the caravan system with the towing vehicle system.
It does not apply to commercial trailers; nor does it include requirements for ELV road lighting and signalling lamps and their installations, except for safety requirements for the routing of cables in LPG storage compartments.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364 7 721.

Bewohnbare Freizeitfahrzeuge - Elektrische Anlagen für DC 12 V - Teil 1: Caravans

Diese Europäische Norm legt die sicherheitstechnischen, gesundheitlichen und funktionellen Anforderungen an elektrische Kleinspannungsanlagen (en: extra low voltage, ELV) DC 12 V im Wohnbereich von Caravans fest. Sie beinhaltet die Gestaltung des Caravansystems und seinen Anschluss an das System des Zugfahrzeugs.
Sie gilt nicht für kommerzielle Anhänger und enthält keine Anforderungen an Kleinspannungsleistungs-(ELV )Straßenlampen, Signallampen und deren Einbau, außer sicherheitstechnische Anforderungen an die Führung von Leitungen durch Schränke für die Lagerung von Flüssiggas.
Diese Europäische Norm legt auch die Anforderungen an die Kleinspannungsleistungsabgabe von Niederspannungs-(LV-)Geräten fest, die benutzt werden dürfen, um eine Kleinspannungsversorgung zu sichern, aber sie legt nicht die Sicherheitsanforderungen, technischen und funktionellen Anforderungen an Niederspannungsgeräte und  anlagen fest. Anforderungen an Niederspannungsanlagen sind in HD 60364-7-721 festgelegt.

Véhicules habitables de loisirs - Installations électriques à très basse tension de 12 V en courant continu - Partie 1: Caravanes

La présente Norme européenne spécifie les exigences en matière de sécurité, de santé et de fonctionnement s’appliquant aux installations électriques à très basse tension (TBT) de 12 V en courant continu (CC) utilisées dans la partie habitable des caravanes. Elle traite de la conception du système de la caravane et de son intégration au système du véhicule tracteur.
Elle ne s’applique pas aux remorques commerciales et ne contient aucune exigence relative aux dispositifs TBT de signalisation et d’éclairage routiers ni à leur installation, sauf pour les exigences de sécurité concernant l’acheminement des câbles à l’intérieur des compartiments de stockage de GPL.
La présente Norme européenne spécifie également les caractéristiques de sortie TBT des équipements basse tension (BT) pouvant être utilisés pour fournir une alimentation TBT, mais n’impose pas d’exigences en matière de sécurité ou de caractéristiques techniques et fonctionnelles s’appliquant aux appareils et installations BT. Les exigences relatives aux installations BT sont spécifiées dans la norme HD 60364-7-721.

Bivalna počitniška vozila - 12 V enosmerna električna napeljava male napetosti - 1. del: Počitniške prikolice

General Information

Status
Published
Publication Date
16-Jan-2018
Withdrawal Date
30-Jul-2018
ICS
43.040.10 - Electrical and electronic equipment
43.100 - Passenger cars. Caravans and light trailers
Technical Committee
CEN/TC 245 - Leisure accommodation vehicles
Drafting Committee
CEN/TC 245/WG 6 - Habitation requirements relating to health and safety, and 12V direct current extra low voltage electrical installations
Current Stage
Ref Project
SIST EN 1648-1:2018 - Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans

Relations

Replaces
EN 1648-1:2012 - Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans
Effective Date
08-Jun-2022

Buy Standard

EN 1648-1:2018EN 1648-1:2018
PreviousNext
Standard
EN 1648-1:2018
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bewohnbare Freizeitfahrzeuge - Elektrische Anlagen für DC 12 V - Teil 1: CaravansVéhicules habitables de loisirs - Installations électriques à très basse tension de 12 V en courant continu - Partie 1 : CaravanesLeisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans43.100Osebni avtomobili. Bivalne prikolice in lahke prikolicePassenger cars. Caravans and light trailers43.040.10RSUHPDElectrical and electronic equipmentICS:Ta slovenski standard je istoveten z:EN 1648-1:2018SIST EN 1648-1:2018en,fr,de01-marec-2018SIST EN 1648-1:2018SLOVENSKI
STANDARDSIST EN 1648-1:20121DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1648-1
January
t r s z ICS
v uä r v rä s râ
v uä s r r Supersedes EN
s x v zæ sã t r s tEnglish Version
Leisure accommodation vehicles æ
s t V direct current extra low voltage electrical installations æ Part
sã CaravansVéhicules habitables de loisirs æ Installations électriques à très basse tension de
s t V en courant continu æ Partie
sã Caravanes
Bewohnbare Freizeitfahrzeuge æ Elektrische Anlagen für DC
s t V æ Teil
sã Caravans This European Standard was approved by CEN on
t r November
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x v zæ sã t r s z ESIST EN 1648-1:2018

Relation of cable cross-sectional area, current flow and cable length for fixed wiring installations . 14 A.1 General . 14 A.2 Graphs for obtaining minimum cross-sectional areas . 14 A.3 Calculation of the minimum cross-sectional areas . 15 Bibliography . 17
Figure 1 — Overview of relevant European Standards applying to leisure accommodation vehicles SIST EN 1648-1:2018
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1648-2:2018(Main)
Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans
SIST EN 1648-2:2018

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of motor caravans.
It applies only to installations which are electrically connected with the electrical installation of the base vehicle or which can be electrically connected with it by means of change-over devices.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364 7 721.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1648-2:2018(Main)
Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans
SIST EN 1648-2:2018

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of motor caravans.
It applies only to installations which are electrically connected with the electrical installation of the base vehicle or which can be electrically connected with it by means of change-over devices.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364 7 721.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19085-9:2024(Main)
Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2024)
SIST EN ISO 19085-9:2024

This document specifies the safety requirements and measures for circular saw benches with or without sliding table or demountable power feed unit or both and capable of continuous production use, also known as “table saws” (in the USA), hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2).
This document deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to machines fitted with one or more of the following devices or working units, whose hazards have been dealt with:
—     device for the main saw blade and scoring saw blade to be raised and lowered through the table;
—     device to tilt the main saw blade and scoring saw blade for angled cutting;
—     device for scoring;
—     device for grooving with milling tool with a width not exceeding 20 mm in one pass;
—     demountable power feed unit;
—     additional manually operated sliding table;
—     powered workpiece clamping device.
This document does not apply to:
a)       machines intended for outdoor use on building sites;
NOTE            Building site saws (contractor saws) are covered by the requirements of ISO 19085-10:2018.
b)       handheld woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting;
c)        machines intended for use in a potentially explosive atmosphere;
d)       machines manufactured prior to the publication of this document.

  • Draft
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17928-2:2024(Main)
Gas infrastructure - Injection stations - Part 2: Specific requirements regarding the injection of biomethane
kSIST FprEN 17928-2:2024

This document establishes specific functional requirements for injection stations for biomethane into gas transmission and distribution systems operated with gases of the second gas family in accordance with EN 437 in addition to the general functional requirements of EN 17928 1:2024.
This document represents the recommendations at the time of its preparation. This document does not apply to injection stations operating prior to the publication of this document.
This document complements EN 17928 1:2024 by specifying the technical safety requirements to be observed in respect of the chemical and physical properties of biomethane.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries.
This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of terms of additional requirements in national legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms.
CEN/TR 13737 (all parts) gives:
—   legislation/regulations applicable in a member state;
—   if appropriate, more restrictive national requirements;
—   a national contact point for the latest information.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16186-6:2024(Main)
Railway applications - Driver's cab - Part 6: Integration of displays, controls and indicators for tram vehicles
SIST EN 16186-6:2024

This document is applicable to vehicles operating on tram networks.
This document gives design requirements and guidance in order to ensure visibility and operability of displays, controls and indicators in the cab in all operating conditions (day, night, natural or artificial lighting).
It covers four aspects:
-   the characteristics of the displays, controls and indicators in order to ensure proper visibility: i.e. range of luminance and contrast as well as the possibility of adjustment of perceived brightness;
-   the requirements for the location of the displays, keyboards, controls and indicators in the cab and on the driver’s desk: i.e. position, angle of visibility, etc. with consideration of the normal driving position and the working environment (windscreen, natural or artificial lighting in the cab, unwanted glare and reflections, etc.);
-   the characteristics and requirements for the location of microphones and loudspeakers;
-   design of symbols.
NOTE   All element numbers within the text refer to Table B.1.
This document does not apply to refurbishment of existing vehicles. This document is not intended to be applicable to driver's auxiliary desk, except for 5.3.13, Clause 6, 7.1.2, Clause 9 and Table B.1.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19085-8:2024(Main)
Woodworking machines - Safety - Part 8: Wide belt sanding machines and surface treating machines (ISO 19085-8:2024)
SIST EN ISO 19085-8:2024

This document specifies the safety requirements and measures for wide belt sanding machines (defined in 3.1) and for surface treating machines (defined in 3.2) capable of continuous production use, altogether referred to as “machines”.
This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
—     transversal sanding unit;
—     cleaning brushing unit;
—     satining roller unit;
—     disk brushing unit;
—     texturing brushing roller unit;
—     texturing brushing belt unit;
—     cutterblock unit;
—     texturing band saw unit;
—     spiked roller unit;
—     multi blade unit;
—     conveyor directly controlled by the machine;
—     additional workpiece vacuum clamping device;
—     antistatic bar unit.
NOTE 1        An antistatic bar is a device that eliminates electrostatic charges on the workpiece to ease its subsequent cleaning from dust by airflow.
This document is also applicable to machines fitted with a laser engraving unit, but the specific hazards of this unit have not been dealt with.
The machines are designed to process workpieces with flat surface and even thickness, in shape of panels or beams or frames, consisting of:
a)       solid wood;
b)       material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2);
c)        gypsum boards, gypsum bounded fibreboards;
d)       composite materials with core consisting of, e.g. polyurethane or mineral material;
e)       composite boards made from the materials listed above;
f)         all materials listed above, already lacquered.
This document does not deal with hazards related to:
—     specific devices other than those listed above;
—     access through in-feed and out-feed openings of machines with a work piece height capacity greater than 700 mm;
—     systems for powered loading or unloading, or both, of the workpiece to or from a single machine;
NOTE 2        Loading the machine manually includes manually placing the workpiece onto a conveyor directly controlled by the machine. Unloading the machine manually includes manually removing the workpiece from a conveyor directly controlled by the machine.
—     out-feed workpieces on machines with feed speed higher than 60 m/min;
—     interfacing of the machine with any other machine.
This document is not applicable to machines intended for use in a potentially explosive atmosphere and to machines manufactured prior to the date of its publication.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17450-2:2024(Main)
Fixed firefighting systems - Water mist systems - Part 2: Product characteristics and test methods for nozzles
kSIST FprEN 17450-2:2024

This document specifies product characteristics and test methods of open nozzles and automatic nozzles for use in water mist systems.
NOTE   All pressure data in this document are given as gauge pressures in bar.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17928-1:2024(Main)
Gas infrastructure - Injection stations - Part 1: General requirements
kSIST FprEN 17928-1:2024

This document establishes the functional requirements for stations for the injection of biomethane, substitute natural gas (SNG) and hydrogen into gas transmission and distribution systems operated with gases (natural gas, biomethane, SNG, hydrogen, gas mixtures) in accordance with European technical rules that ensure the interoperability of systems.
Figure 1 describes the general approach including all the relevant functions that can be installed in different configurations. The injection of Hydrogen is covered separately in EN 17928-3:2024.
This document also applies to refeeding stations that feed such gases back into upstream gas supply networks; see Figure 2.
This document represents the state of the art at the time of its preparation.
This document does not apply to injection stations operating prior to the publication of this document.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of terms of additional requirements in national legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms.
CEN/TR 13737 (all parts) gives:
—   legislation/regulations applicable in a member state;
—   if appropriate, more restrictive national requirements;
—   a national contact point for the latest information.

  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14105:2024(Main)
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
kSIST FprEN 14105:2024

This document specifies a method to determine the free glycerol and residual mono-, di- and triglyceride contents in fatty acid methyl esters (FAME). The total glycerol content is then calculated from the obtained results.
Under the conditions described, the quantification limits are 0,001 % (m/m) for free glycerol, 0,10 % (m/m) for all glycerides (mono-, di- and tri-). This method is suitable for FAME prepared from rapeseed, sunflower, soybean, palm, animal oils and fats and mixture of them. It is not suitable for FAME produced from or containing coconut and palm kernel oils derivatives because of overlapping of different glyceride peaks.
NOTE 1   For the purposes of this document, the term "% (m/m)" is used to represent the mass fraction.
NOTE 2   Under the common EN 14105 GC conditions, squalene can coelute with alpha glycerol monostearate. If the presence of squalene is suspected, EN 17057 can be used to discriminate between squalene and glycerol monostearate.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1591-1:2024(Main)
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
SIST EN 1591-1:2024

This document defines a calculation method for bolted, gasketed, circular flange joints. Its purpose is to ensure structural integrity and control of leak tightness. It uses gasket parameters based on definitions and test methods specified in EN 13555:2014.
The calculation method is not applicable to joints with a metallic contact out of the sealing face or to joints whose rigidity varies appreciably across gasket width. For gaskets in incompressible materials, which permit large deformations, the results given by the calculation method can be excessively conservative (i.e. required bolting load too high, allowable pressure of the fluid too low, required flange thickness too large, etc.).

  • Draft
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day