iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13454-2:2003+A1:2007

(Main)

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods

This European Standard describes the test methods for binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate specified in EN XXXX-1. This European Standard describes reference test methods. If other than these methods and conditions are used, it is necessary to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.

Calciumsulfat-Binder, Calciumsulfat-Compositbinder und Calciumsulfat-Werkmörtel für Estriche - Teil 2: Prüfverfahren

Diese Europäische Norm legt die Prüfverfahren für Calciumsulfat-Binder und Calciumsulfat-Compositbinder nach prEN 13454-1 fest.
Diese Europäische Norm beschreibt auch die Prüfverfahren für Calciumsulfat-Werkmörtel für Estriche nach EN 13813.
Diese Europäische Norm gibt Referenz-Prüfverfahren an. Falls andere Prüfverfahren unter anderen Bedingungen angewendet werden, ist nachzuweisen, dass die Ergebnisse denen der Referenz-Prüfverfahren entsprechen. Im Streitfall werden nur die Referenz-Prüfverfahren angewendet.

Liants, liants composites et mélanges fabriqués en usine à base de sulfate de calcium pour chapes de sol - Partie 2: Méthodes d'essai

La présente Norme européenne décrit les méthodes d'essai des liants et liants composites à base de sulfate de calcium pour chapes de sol spécifiés dans le prEN 13454-1.
Elle décrit également les méthodes d'essai relatives aux mélanges fabriqués en usine à base de sulfate de calcium pour chapes de sol spécifiés dans l'EN 13813.
La présente Norme européenne décrit des méthodes d'essai de référence. En cas d'utilisation d'autres méthodes et d'autres conditions, il est nécessaire de prouver qu'elles donnent des résultats équivalents à ceux obtenus selon les méthodes de référence. En cas de litige, seule la méthode d'essai de référence est appliquée.

Veziva, sestavljena veziva in industrijsko pripravljene mešanice za estrihe na osnovi kalcijevega sulfata - 2. del: Preskusne metode

General Information

Status
Withdrawn
Publication Date
17-Jul-2007
Withdrawal Date
22-Jan-2019
ICS
91.100.10 - Cement. Gypsum. Lime. Mortar
91.100.50 - Binders. Sealing materials
Technical Committee
CEN/TC 241 - Gypsum and gypsum based products
Drafting Committee
CEN/TC 241 - Gypsum and gypsum based products
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
23-Jan-2019
Ref Project
SIST EN 13454-2:2004+A1:2007 - Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods

Relations

Merged From
EN 13454-2:2003 - Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods
Effective Date
22-Dec-2008
Replaced By
EN 13454-2:2019 - Binders for floor screeds based on calcium sulphate - Part 2: Test methods
Effective Date
03-Aug-2016

Buy Standard

EN 13454-2:2004+A1:2007EN 13454-2:2004+A1:2007
PreviousNext
Standard
EN 13454-2:2004+A1:2007
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methodsVeziva, sestavljena veziva in industrijsko pripravljene mešanice za estrihe na osnovi kalcijevega sulfata - 2. del: Preskusne metodeLiants, liants composites et mélanges fabriqués en usine a base de sulfate de calcium pour chapes de sol - Partie 2: Méthodes d'essaiCalciumsulfat-Binder, Calciumsulfat-Compositbinder und Calciumsulfat-Werkmörtel für Estriche - Teil 2: PrüfverfahrenTa slovenski standard je istoveten z:EN 13454-2:2003+A1:2007SIST EN 13454-2:2004+A1:2007en,fr,de91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:SLOVENSKI
STANDARDSIST EN 13454-2:2004+A1:200701-december-2007

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13454-2:2003+A1
July 2007 ICS 91.100.10; 91.100.50 Supersedes EN 13454-2:2003 English Version
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods
Liants, liants composites et mélanges fabriqués en usine à base de sulfate de calcium pour chapes de sol - Partie 2: Méthodes d'essai
Calciumsulfat-Binder, Calciumsulfat-Compositbinder und Calciumsulfat-Werkmörtel für Estriche - Teil 2: Prüfverfahren This European Standard was approved by CEN on 1 September 2003 and includes Amendment 1 approved by CEN on 22 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13454-2:2003+A1:2007: E

Part 1: Definitions and requirements
Part 2: Test methods The requirements in prEN 13454-1 are based on the results of tests according to EN 13454-2 on binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate. This European Standard describes test methods for binders, composite binders and factory made mixtures where the principal active component is calcium sulfate. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13454-2:2019(Main)
Binders for floor screeds based on calcium sulphate - Part 2: Test methods
SIST EN 13454-2:2019

This document describes the test methods for binders for floor screeds based on calcium sulphate specified in EN 13454-1. In addition, some of the described test methods apply for factory made mixtures for floor screeds based on calcium sulphate specified in EN 13813.
This document describes reference test methods. If methods and conditions other than these are used, it is important to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.
This document describes test methods for binders and made mixtures where the principal active component is calcium sulphate.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13454-1:2004(Main)
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
SIST EN 13454-1:2004

This document applies to calcium sulphate binders and composite binders made of calcium sulphate used for the manufacture of floor screeds for interior use in buildings. It also includes requirements for factory made mixtures made of calcium sulphate used for the manufacture of floor screeds which are given in EN 13813. This document does not cover the application of floor screeds. Floor screeds made with products covered by this document may contribute to thermal and sound insulation and fire protection of the floor.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 13454-1(Main)
Binders for floor screeds based on calcium sulphate - Part 1: Definitions and requirements
oSIST prEN 13454-1:2017

This document applies to binders made of calcium sulphate used for the manufacture of floor screeds for interior use in buildings. This document does not cover the application of floor screeds. Floor screeds made with products covered by this document can contribute to thermal and sound insulation and fire protection of the floor.
This document specifies binders where the principal active constituent is calcium sulphate.
Factory made mixtures are covered by EN 13813 and are therefore not part of this document.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13454-2:2019(Main)
Binders for floor screeds based on calcium sulphate - Part 2: Test methods
SIST EN 13454-2:2019

This document describes the test methods for binders for floor screeds based on calcium sulphate specified in EN 13454-1. In addition, some of the described test methods apply for factory made mixtures for floor screeds based on calcium sulphate specified in EN 13813.
This document describes reference test methods. If methods and conditions other than these are used, it is important to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.
This document describes test methods for binders and made mixtures where the principal active component is calcium sulphate.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15368:2008+A1:2010(Main)
Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
SIST EN 15368:2008+A1:2010

This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar for masonry, rendering and plastering and other non structural construction products.
This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given.
NOTE   For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned.
Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13454-1:2004(Main)
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
SIST EN 13454-1:2004

This document applies to calcium sulphate binders and composite binders made of calcium sulphate used for the manufacture of floor screeds for interior use in buildings. It also includes requirements for factory made mixtures made of calcium sulphate used for the manufacture of floor screeds which are given in EN 13813. This document does not cover the application of floor screeds. Floor screeds made with products covered by this document may contribute to thermal and sound insulation and fire protection of the floor.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15368 rev(Main)
Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
oSIST prEN 15368:2018

This European Standard applies to hydraulic binder for non-structural applications in construction used as binder for preparation of mortar for masonry, rendering and plastering and other non-structural construction products.
This European Standard specifies the definition and composition of hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given.
NOTE   For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned.
Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of hydraulic binder for non-structural applications, are outside the scope of this European Standard.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 13454-1(Main)
Binders for floor screeds based on calcium sulphate - Part 1: Definitions and requirements
oSIST prEN 13454-1:2017

This document applies to binders made of calcium sulphate used for the manufacture of floor screeds for interior use in buildings. This document does not cover the application of floor screeds. Floor screeds made with products covered by this document can contribute to thermal and sound insulation and fire protection of the floor.
This document specifies binders where the principal active constituent is calcium sulphate.
Factory made mixtures are covered by EN 13813 and are therefore not part of this document.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15368:2008/FprA1(Amendment)
Hydraulic binder for non-structural applications: definition, specifications and conformity criteria
SIST EN 15368:2008/kprA1:2009

This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar or masonry, rendering and plastering and other non structural construction products.
This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given.
NOTE   For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned.
Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17677:2024(Main)
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
kSIST FprEN 17677:2024

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:
a)   are intended to be:
-   only for professional use;
-   used by one operator at a time;
-   used to deposit only pasty food (i.e.: cream, dough, batter, etc.);
-   used to deposit only on trays;
-   used as standalone machines;
-   used with manual loading of the dough into the hopper;
-   used with manual loading and unloading of the tray/s on/from the tray conveyor.
b)   can carry out only the following movements and relevant directions (see Figure 1a)):
-   Z: vertical movement of the table and/or the deposit unit;
-   X: horizontal movement of the tray conveyor;
-   Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;
c)   are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;
d)   have a total length of the tray conveyor ≤ 1 600 mm;
e)   have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));
f)   have a deposit performance (see 3.5):
-   ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;
-   ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;
g)   have a trays performance (see 3.6) ≤ 4 trays/minute.
This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.
1.2 The following hazards are not covered by this document:
-   hazards arising from the use of an automatic hopper loading system;
-   hazards due to packaging, handling or transport;
-   hazards arising from electromagnetic compatibility issues;
-   hazards due to dismantling and disassembling;
-   hazards due to operational stop;
-   hazards due to selection of control or operating modes;
-   hazards due to failure of the power supply;
-   hazards due to surfaces, edges or angles;
-   hazards due to uncontrolled movements;
-   hazards due to machinery maintenance.
This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.
The significant hazards covered by this document are described in Annex B.
1.3 The following machines are excluded from the scope of this document:
a)   machines which deposit pasty food by means of needles (injection);
b)   machines where the trays are put onto and/or removed from the tray conveyor automatically;
c)   machines which require a blade for the cutting system;
d)   domestic appliances;
e)   machines for industrial production;
f)   machines to deposit other products than food for bakery and pastry products.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day