Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons

This Technical Specification specifies a test method to determine the mass fraction of a polymeric additive that falls below a MW of 1000.  The method is applicable to polymeric additives per se - i.e. supplied in their usable form, before formulation into a plastic.  The method is also applicable to polymeric additives extracted from finished plastic materials and articles, provided that precautions are taken to ensure the absence of any interference from any other co-extractives derived from the plastic.

Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln - Kunststoffe - Polymere Zusatzstoffe - Prüfverfahren zur Bestimmung des Masseanteils eines polymeren Zusatzstoffes unter 1000 Dalton

Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques - Additifs polymériques - Méthode d'essai pour la détermination de la fraction massique d'un additif polymérique de masse moléculaire inférieure à 1000 daltons

La présente Spécification Technique spécifie une méthode d'essai permettant de déterminer la fraction massique d'un additif polymérique dont la MW est inférieure à 1000. Cette méthode est applicable aux additifs polymériques en soi, c'est-à-dire fournis sous leur forme utilisable, avant la formulation en une matière plastique. Cette méthode s'applique également aux additifs polymériques extraits des matériaux et objets en plastique finis, à condition que des précautions soient prises afin de garantir l'absence de toute interférence d'autres produits co-extraits dérivés du plastique.

Materiali in predmeti v stiku z živili - Polimerni materiali – Polimerni aditivi – Preskusna metoda za določevanje frakcije polimernih aditivov z maso pod 1000 daltonov

General Information

Status
Published
Publication Date
09-Dec-2003
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
17-Jul-2007
Completion Date
17-Jul-2007

Buy Standard

Technical specification
TS CEN/TS 14577:2004
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 14577:2004
01-februar-2004
0DWHULDOLLQSUHGPHWLYVWLNX]åLYLOL3ROLPHUQLPDWHULDOL±3ROLPHUQLDGLWLYL±
3UHVNXVQDPHWRGD]DGRORþHYDQMHIUDNFLMHSROLPHUQLKDGLWLYRY]PDVRSRG
GDOWRQRY
Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test
method for the determination of the mass fraction of a polymeric additive that lies below
1000 Daltons
Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln - Kunststoffe - Polymere
Zusatzstoffe - Prüfverfahren zur Bestimmung des Masseanteils eines polymeren
Zusatzstoffes unter 1000 Dalton
Matériaux et objets en contact avec les denrées alimentaires - Matieres plastiques -
Additifs polymériques - Méthode d'essai pour la détermination de la fraction massique
d'un additif polymérique de masse moléculaire inférieure a 1000 daltons
Ta slovenski standard je istoveten z: CEN/TS 14577:2003
ICS:
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
83.040.30 Pomožni materiali in aditivi Auxiliary materials and
za polimerne materiale additives for plastics
SIST-TS CEN/TS 14577:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.