EN 10296-1:2003

Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes

This part of EN 10296 specifies the technical delivery conditions for electric welded, laser beam welded and submerged arc welded tubes of circular cross section made of non-alloy and alloy steels for mechanical and general engineering purposes.

Geschweißte kreisförmige Stahlrohre für den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten und legierten Stählen

Dieser Teil der EN 10296 enthält die technischen Lieferbedingungen für elektrisch geschweißte, laserstrahl-geschweißte und unterpulvergeschweißte Rohre mit kreisförmigem Querschnitt aus unlegierten und legierten Stählen, die für die Anwendung im Maschinenbau und für allgemeine technische Anwendungen bestimmt sind.

Tubes ronds soudés en acier pour utilisation en mécanique générale et en construction mécanique - Conditions techniques de livraison - Partie 1 : Tubes en acier non allié et allié

La présente partie de l'EN 10296 spécifie les conditions techniques de livraison des tubes à section circulaire en acier non allié et allié soudés électriquement, par laser et à l'arc immergé sous flux en poudre, pour utilisation en mécanique générale et en construction mécanique.

Okrogle varjene jeklene cevi za strojništvo in splošno uporabo v tehniki – Tehnični dobavni pogoji – 1. del: Cevi iz nelegiranih in legiranih jekel

General Information

• Status: Published
• Publication Date: 17-Jun-2003
• Withdrawal Date: 30-Dec-2003
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 11/WG 1 - Steel tubes for mechanical general engineering purposes
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Sep-2021
• Completion Date: 02-Sep-2021
• Mandate: M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
• Ref Project: SIST EN 10296-1:2003 - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geschweißte kreisförmige Stahlrohre für den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten und legierten StählenTubes ronds soudés en acier pour utilisation en mécanique générale et en construction mécanique - Conditions techniques de livraison - Partie 1 : Tubes en acier non allié et alliéWelded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10296-1:2003SIST EN 10296-1:2003en01-november-2003SIST EN 10296-1:2003SLOVENSKI
STANDARD



SIST EN 10296-1:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10296-1June 2003ICS 77.140.75English versionWelded circular steel tubes for mechanical and generalengineering purposes - Technical delivery conditions - Part 1:Non-alloy and alloy steel tubesTubes ronds soudés en acier pour utilisation en mécaniquegénérale et en construction mécanique - Conditionstechniques de livraison - Partie 1: Tubes en acier non alliéet alliéGeschweißte kreisförmige Stahlrohre für denMaschinenbau und allgemeine technische Anwendungen -Technische Lieferbedingungen - Teil 1: Rohre ausunlegierten und legierten StählenThis European Standard was approved by CEN on 20 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10296-1:2003 ESIST EN 10296-1:2003



EN 10296-1:2003 (E)2ContentsPageForeword.31Scope.42Normative references.43Terms and definitions.54Symbols.65Classification and designation.65.1Classification.65.2Designation.66Information to be supplied by the purchaser.66.1Mandatory information.66.2Options.76.3Example of an order.77Manufacturing process.77.1Steelmaking process.77.2Deoxidation
...