EN ISO 15874-5:2013/A1:2018

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15874-5:2013)

Dieser Teil der ISO 15874 legt Anforderungen an die Gebrauchstauglichkeit von Rohrleitungssystemen aus Polypropylen (PP) fest, die in der Warm- und Kaltwasserinstallation innerhalb von Gebäuden für den Transport von Trink- oder Brauchwasser (Hausinstallation) sowie für Heizungsanlagen unter Berücksichtigung des betreffenden zulässigen Betriebsdruckes und der für die jeweilige Anwendungsklasse geltenden Temperaturen (siehe ISO 15874-1:2013, Tabelle 1) eingesetzt werden.
Dieser Teil der ISO 15874 enthält Festlegungen zu Anwendungsklassen, die sich auf Betriebsbedingungen beziehen, sowie Festlegungen über zulässige Betriebsdrücke. Diese Norm gilt nicht, wenn für TD, Tmax und Tmal höhere als die in ISO 15874-1:2013, Tabelle 1, aufgeführten Werte zugrunde gelegt werden.
ANMERKUNG Der Anwender bzw. Auftraggeber ist unter Berücksichtigung der eigenen Anforderungen sowie der geltenden nationalen Festlegungen und Verlegepraktiken für die entsprechende Auswahl dieser Kriterien verantwortlich.
Er legt auch die Prüfparameter für die Prüfverfahren fest, auf die in diesem Teil von ISO 15874 verwiesen wird.
Zusammen mit den übrigen Teilen der ISO 15874 gilt dieser Teil für Rohre und Formstücke aus PP, deren Verbindungen untereinander sowie mit Rohrleitungsteilen aus anderen Kunststoffen oder metallenen Werkstoffen, die für die Warm- und Kaltwasserinstallation vorgesehen sind.

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 15874-5:2013/Amd 1:2018)

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polipropilen (PP) - 5. del: Ustreznost sistema namenu - Dopolnilo A1 (ISO 15874-5:2013/Amd 1:2018)

General Information

• Status: Published
• Publication Date: 31-Jul-2018
• Withdrawal Date: 27-Feb-2019
• ICS: 23.040.20 - Plastics pipes
• ICS: 91.140.60 - Water supply systems
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155/WG 16 - Systems for hot and cold water applications
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Aug-2018
• Due Date: 25-Jan-2019
• Completion Date: 01-Aug-2018
• Ref Project: SIST EN ISO 15874-5:2013/A1:2018 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)

Relations

• Amends: EN ISO 15874-5:2013 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013)
• Effective Date: 15-Oct-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2018
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLSURSLOHQ33GHO8VWUH]QRVWVLVWHPDQDPHQX'RSROQLOR$,62
$PG
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5:
Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen
(PP) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 15874-5:2013/Amd
1:2018)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polypropylène (PP) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO
15874-5:2013/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 15874-5:2013/A1:2018
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15874-5:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2018
EUROPÄISCHE NORM
ICS 23.040.20; 91.140.60
English Version
Plastics piping systems for hot and cold water installations
- Polypropylene (PP) - Part 5: Fitness for purpose of the
system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polypropylène Kaltwasserinstallation - Polypropylen (PP) - Teil 5:
(PP) - Partie 5: Aptitude à l'emploi du système - Gebrauchstauglichkeit des Systems - Änderung 1 (ISO
Amendement 1 (ISO 15874-5:2013/Amd 1:2018) 15874-5:2013/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 15874-5:2013; it was approved by CEN on 28 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15874-5:2013/A1:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 15874-5:2013/A1:2018) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 15874-5:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2019,
and conflicting national standards shall be withdrawn at the latest by February 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Endorsement notice
The text of ISO 15874-5:2013/Amd 1:2018 has been approved by CEN as EN ISO 15874-
5:2013/A1:2018 without any modification.

INTERNATIONAL ISO
STANDARD 15874-5
Second edition
2013-02-15
AMENDMENT 1
2018-07
Plastics piping systems for hot
and cold water installations —
Polypropylene (PP) —
Part 5:
Fitness for purpose of the system
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Polypropylène (PP) —
Partie 5: Aptitude à l'emploi du système
AMENDEMENT 1
Reference number
ISO 15874-5:2013/Amd.1:2018(E)
©
ISO 2018
ISO 15874-5:2013/Amd.1:2018(E)

© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Sw
...