iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15536:2007

(Main)

Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods

Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods

This European Standard specifies and defines test methods for coal tar wash oils. Annex A specifies usage warnings for industrial purposes. The main purposes of these oils are to dissolve hydrocarbon derivatives in coke oven gas to clean greasy metal pieces.

Derivate der Kohlenpyrolyse - Steinkohlenteeröle: Waschöle - Anforderungen und Prüfverfahren

Diese Europäische Norm legt Prüfverfahren für Steinkohlenteerwaschöle fest. Anhang A gibt die Anwendungswarnungen für industrielle Anwendungen an. Der Hauptanwendungsbereich liegt in der Lösung von einigen in Hochofengasen enthaltenen Kohlenwasserstoffen und in der Reinigung von beschmutzten Metallpartikeln.

Produits dérivés de la pyrolyse de la houille - Huiles de goudron de houille : Huiles de lavage - Spécifications et méthodes d'essai

La présente Norme européenne spécifie et définit des méthodes d’essai des huiles de lavage des goudrons de houille. L’annexe A spécifie des avertissements pour l’utilisation de ces méthodes à des fins industrielles. L’objet principal de ces huiles est de dissoudre les dérivés d’hydrocarbures dans les gaz de four à coke utilisés pour nettoyer les pièces métalliques graisseuses.

Derivati pri pirolizi premoga - Olja iz premogovega katrana - Specifikacije in preskusne metode

General Information

Status
Published
Publication Date
27-Mar-2007
Withdrawal Date
29-Sep-2007
ICS
75.160.10 - Solid fuels
Technical Committee
CEN/TC 317 - Derivates from coal from pyrolysis
Drafting Committee
CEN/TC 317 - Derivates from coal from pyrolysis
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
20-Feb-2024
Ref Project
SIST EN 15536:2007 - Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods

Buy Standard

EN 15536:2007EN 15536:2007
PreviousNext
Standard
EN 15536:2007
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methodsDerivati pri pirolizi premoga - Olja iz premogovega katrana - Specifikacije in preskusne metodeProduits dérivés de la pyrolyse de la houille - Huiles de goudron de houille : Huiles de lavage - Spécifications et méthodes d'essaiDerivate der Kohlenpyrolyse - Steinkohlenteeröle: Waschöle - Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 15536:2007SIST EN 15536:2007en,fr,de75.160.10Trda gorivaSolid fuelsICS:SLOVENSKI
STANDARDSIST EN 15536:200701-september-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15536March 2007ICS 75.160.10 English VersionDerivatives from coal pyrolysis - Coal tar based oils: wash oils -Specifications and test methodsProduits dérivés de la pyrolyse de la houille - Huiles degoudron de houille: huiles de lavage - Caractéristiques etméthodes d'essaisDerivate der Kohlenpyrolyse - Steinkohlenteeröle:Waschöle - Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 4 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15536:2007: E

Usage warnings.6 A.1 Compostion – Data on components.6 A.2 First aid measures.6 A.3 Handling and storage.6 A.4 Disposal considerations.7 Bibliography.8
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15529:2007(Main)
Derivatives from coal pyrolysis - Terminology
SIST EN 15529:2007

This European Standard defines the principal terms concerning derivatives from coal pyrolysis.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4349:2024(Main)
Solid recovered fuels - Determination of the Recycling Index for co-processing (ISO 4349:2024)
SIST EN ISO 4349:2024

This document specifies the determination of the share of material recovery in the case of energy recovery (i.e. co-processing) of solid recovered fuels (SRFs), for example, in a cement kiln. This share, called the recycling index (R-index), is calculated on the basis of the ash content and the ash composition.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21911-1:2023(Main)
Solid recovered fuels - Determination of self-heating - Part 1: Isothermal calorimetry (ISO 21911-1:2022)
SIST EN ISO 21911-1:2023

This document specifies an analytical method for quantification of the spontaneous heat generation from solid recovered fuels using isothermal calorimetry.
This document gives guidance on the applicability and use of the specified analytical method. It further establishes procedures for sampling and sample handling of solid recovered fuels prior to the analysis of spontaneous heat generation.
The test procedure given in this document quantifies the thermal power (heat flow) of the sample during the test. It does not identify the source of self-heating in the test portion analysed.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1860-4:2023(Main)
Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
SIST EN 1860-4:2023

This document is applicable to single use barbecues which burn solid fuels.
This document specifies requirements for materials, construction, design and test methods to ensure safe use and satisfactory performance.
This document is intended to reduce the risks which may occur during and through barbecuing with solid fuels.
This document deals with the reasonably foreseeable hazards presented by single use barbecues when used by adults. Very vulnerable people can have needs that go beyond the level of safety addressed in this document.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1860-2:2023(Main)
Appliances, solid fuels and firelighters for barbecuing - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Requirements and test methods
SIST EN 1860-2:2023

This document specifies the requirements and test methods for barbecue charcoal and barbecue charcoal briquettes for use in barbecue appliances.
This document is intended to reduce the risks which can occur during and through barbecuing with solid fuels.
Barbecue charcoal in accordance with this document refers to the solid remainder of dry distillation of wood or other vegetable matter.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1860-3:2023(Main)
Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test methods
SIST EN 1860-3:2023

This document specifies the safety, performance, consumer packaging and marking requirements including the test methods for firelighters used to light solid fuels in barbecue and grill appliances.
This document covers firelighters supplied as either solid, liquid, thickened liquid or gel formulations. However, the use of highly flammable liquids (except in stabilized formulations) is specifically excluded from the scope of this document as their use as barbecue firelighters is regarded as highly dangerous.
This document is intended to reduce the risks which may occur during and through barbecuing with solid fuels.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 21911-2:2022(Main)
Solid recovered fuels - Determination of self-heating - Part 2: Basket heating tests (ISO/TS 21911-2:2022)
SIST-TS CEN ISO/TS 21911-2:2022

This document gives guidance on basket heating tests for characterization of self-heating properties of solid recovered fuels (SRFs).
This document includes:
a) a compilation of basket heating test methods;
b) guidance on the applicability and use of basket heating tests for SRF;
c) information on the application of basket heating test data for calculations of critical conditions in storage.
Data on spontaneous heat generation determined using this document is only associated with the specific quality and age of the sample material.
The information derived using this document is intended for use in quality control and in hazard and risk assessments related to the procedures given in ISO 21912.

  • Technical specification
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21646:2022(Main)
Solid recovered fuels - Sample preparation (ISO 21646:2022)
SIST EN ISO 21646:2022

This document specifies methods for sample preparation to ensure representativeness of the samples throughout the preparation procedures to produce general analysis samples. Suitable test portions can be taken from the laboratory or general analysis samples and used for analysis according to the specific requirements defined in the corresponding analytical procedures.
This document specifies the correct sample preparation sequence to be applied to:
a) the composite sample, in order to produce a laboratory sample (taking into account large pieces of solid recovered fuel);
b) each sub-sampling step throughout the testing programme;
c) the laboratory sample, in order to obtain suitable test portions;
d) ensure the representativeness of the test portions that have been taken according to the sample preparation plan, prior to physical analysis, chemical analysis or both (e.g. extractions, digestion, analytical determinations).
The methods specified in this document can be used for sample preparation, for example, when the samples are to be tested for bulk density, biomass content determination, mechanical durability, particle size distribution, moisture content, ash content, ash melting behaviour, calorific value, chemical composition, impurities and self-heating properties. The methods are not intended to be applied to the very large samples required for the testing of bridging properties.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22940:2021(Main)
Solid recovered fuels - Determination of elemental composition by X-ray fluorescence (ISO 22940:2021)
SIST EN ISO 22940:2021

This document specifies the procedure for a determination of major and minor element concentrations in solid recovered fuel material by energy-dispersive X-ray fluorescence (EDXRF) spectrometry or wavelength-dispersive X-ray fluorescence (WDXRF) spectrometry using a calibration with solid recovered fuel reference materials or solid recovered fuel samples with known content. A semiquantitative determination can be carried out using matrix independent standards.
This document is applicable to the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Mo, Cd, Sb, Sn, Tl and Pb. Concentration levels between approximately 0,000 1 % and 100 % can be determined depending on the element, the calibration materials used and the instrument used.
NOTE            X-ray fluorescence spectrometry can be used as a fast method for a qualitative overview of elements and impurities and after suitable calibration it is very useful for determining major elements or even minor elements (except Hg) in order to quickly identify increased concentrations of minor elements in solid recovered fuels (SRF), for example during SRF-production.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21654:2021(Main)
Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
SIST EN ISO 21654:2021

This document specifies a method for the determination of gross calorific value of solid recovered fuels at constant volume and at the reference temperature 25 °C in a combustion vessel calorimeter calibrated by combustion of certified benzoic acid.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day