EN ISO 4349:2024
(Main)Solid recovered fuels - Determination of the Recycling Index for co-processing (ISO 4349:2024)
Solid recovered fuels - Determination of the Recycling Index for co-processing (ISO 4349:2024)
This document specifies the determination of the share of material recovery in the case of energy recovery (i.e. co-processing) of solid recovered fuels (SRFs), for example, in a cement kiln. This share, called the recycling index (R-index), is calculated on the basis of the ash content and the ash composition.
Feste Sekundärbrennstoffe - Verfahren zur Bestimmung des Recycling-Index für die gemeinsame energetische und stoffliche Verwertung (Co-Processing) (ISO 4349:2024)
Dieses Dokument legt die Bestimmung des Anteils der stofflichen Verwertung im Falle der energetischen Verwertung (d. h. Co-Processing) von festen Sekundärbrennstoffen (SRF, en: solid recovered fuels) zum Beispiel in einem Zementofen fest. Dieser Anteil, der so genannte Recyclingindex (R-Index), wird auf der Grundlage des Aschegehaltes und der Aschezusammensetzung berechnet.
Combustibles solides de récupération - Détermination de l’indice de recyclage pour le cotraitement (ISO 4349:2024)
Le présent document spécifie la détermination de la part de valorisation de matière dans le cas de la valorisation énergétique (c’est-à-dire le cotraitement) des combustibles solides de récupération (CSR), par exemple, dans un four à ciment. Cette part, appelée indice de recyclage (indice R), est calculée sur la base de la teneur en cendres et de la composition des cendres.
Trdna alternativna goriva - Določitev indeksa recikliranja za soprocesiranje (ISO 4349:2024)
Ta dokument določa metodo za določanje deleža predelave materiala pri sosežigu trdnega alternativnega goriva (SRF) v cementni peči. Trdno alternativno gorivo vsebuje inertne mineralne materiale (npr. SiO2, CaO itd.), potrebne za proizvodnjo cementnega klinkerja. Pri soprocesiranju v cementni industriji je vsebovana energija obnovljena inmineralni del trdnega alternativnega goriva je vključen v klinker. Na podlagi vsebnosti pepela in njegove sestave je mogoče izračunati indeks recikliranja.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Trdna alternativna goriva - Določitev indeksa recikliranja za soprocesiranje (ISO
4349:2024)
Solid recovered fuels - Determination of the Recycling Index for co-processing (ISO
4349:2024)
Feste Sekundärbrennstoffe - Verfahren zur Bestimmung des Recycling-Index für Co-
Processing (ISO 4349:2024)
Combustibles solides de récupération - Détermination de l’indice de recyclage pour le
cotraitement (ISO 4349:2024)
Ta slovenski standard je istoveten z: EN ISO 4349:2024
ICS:
75.160.10 Trda goriva Solid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 4349
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 75.160.10
English Version
Solid recovered fuels - Determination of the Recycling
Index for co-processing (ISO 4349:2024)
Combustibles solides de récupération - Détermination Feste Sekundärbrennstoffe - Verfahren zur
de l'indice de recyclage pour le cotraitement (ISO Bestimmung des Recycling-Index für Co-Processing
4349:2024) (ISO 4349:2024)
This European Standard was approved by CEN on 17 May 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4349:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 4349:2024) has been prepared by Technical Committee ISO/TC 300 "Solid
recovered materials, including solid recovered fuels" in collaboration with Technical Committee
CEN/TC 343 “Solid recovered materials, including solid recovered fuels” the secretariat of which is held
by SFS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4349:2024 has been approved by CEN as EN ISO 4349:2024 without any modification.
International
Standard
ISO 4349
First edition
Solid recovered fuels —
2024-05
Determination of the recycling
index for co-processing
Combustibles solides de récupération — Détermination de
l'indice de recyclage pour le cotraitement
Reference number
ISO 4349:2024(en) © ISO 2024
ISO 4349:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 4349:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms. 2
5 Reagents . 2
6 Apparatus . 2
7 Procedure . 3
7.1 Preparation of the test sample .3
7.2 Determination of the ash content and preparation of ash sample .3
7.3 Determination of the elemental content .3
7.4 Methods .3
7.4.1 Method A – wet digestion followed by ICP-MS or ICP-OES analysis .3
7.4.2 Method B – preparation of fused beads followed by ICP-OES analysis.4
7.4.3 Method C – preparation of pellets followed by XRF analysis .4
7.4.4 Alternative procedures .4
7.5 Calculation .4
7.5.1 Calculation of element oxides .4
7.5.2 Calculation of R-index for co-processing .5
8 Performance characteristics . 5
9 Test report . 5
Annex A (informative) SRF ash composition from mixed municipal and commercial waste . 6
Annex B (informative) Validation .15
Bibliography .23
iii
ISO 4349:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 300, Solid recovered materials, including
solid recovered fuels, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 343, Solid recovered materials, including solid recovered fuels, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO 4349:2024(en)
Introduction
When solid recovered fuels (SRFs) are co-processed mainly in the cement industry, simultaneous energy
recovery and recycling of mineral components of waste material takes place because the ash is directly
incorporated into the clinker. SRF co-processing therefore allows for the replacement of both mineral
resources and fossil fuels.
SRF ashes contain various chemical components that are crucial raw materials for cement manufacturers,
fulfil specific tasks in cement clinker production or represent clinker phases giving the clinker its specific
properties. For example, a major part of SRF ashes from mixed municipal and commercial waste consists of
the four main chemical components that are required for cement clinker production: Al O , CaO, Fe O and
2 3 2 3
SiO (see Annex A). Additionally, minor ash constituents include MgO and TiO , both of which are present
2 2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.