FprEN 12309-6
(Main)Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 6: Calculation of seasonal performances
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 6: Calculation of seasonal performances
1.1 Scope of EN 12309
Appliances covered by this document include one or a combination of the following:
- gas-fired sorption chiller;
- gas-fired sorption chiller/heater;
- gas-fired sorption heat pump.
This document applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery.
This document applies to appliances having flue gas systems of Type B and Type C (according to EN 1749:2020) and to appliances designed for outdoor installations, including Type A. EN 12309 does not apply to air conditioners, it only applies to appliances having:
- integral burners under the control of fully automatic burner control systems,
- closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated,
- mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2023).
In the case of packaged units (consisting of several parts), this document applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309.
Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309.
All the symbols given in this document are used regardless of the language used.
1.2 Scope of this Part 6 to EN 12309
This part of EN 12309 specifies the calculation methods of seasonal performances for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. It deals in particular with the calculation methods of reference seasonal performances in cooling and heating mode for monovalent and bivalent appliances.
Gasbefeuerte Sorptions-Geräte für Heizung und/oder Kühlung mit einer Nennwärmebelastung nicht über 70 kW - Teil 6: Berechnung der saisonalen Effizienzkennzahlen
1.1 Anwendungsbereich von EN 12309
Zu den Geräten, die von diesem Dokument abgedeckt werden, gehören die folgenden oder eine Kombination daraus:
- gasbefeuertes Sorptionskühlgerät;
- gasbefeuertes Sorptionskühl /heizgerät;
- gasbefeuerte Sorptionswärmepumpe.
Dieses Dokument gilt für Geräte, die dafür ausgelegt sind, für die Raumheizung oder kühlung mit oder ohne Wärmerückgewinnung verwendet zu werden.
Dieses Dokument gilt für Geräte mit Abgassystemen der Art B und Art C (nach EN 1749:2020) sowie für Geräte, die zur Aufstellung im Freien ausgelegt sind, einschließlich Geräten der Art A. EN 12309 gilt nicht für Klimaanlagen; sie gilt ausschließlich für Geräte mit
- integrierten Brennern, gesteuert mittels Feuerungsautomaten;
- geschlossenen Kühlkreislaufsystemen, in denen das Kühlmittel nicht direkt mit dem/der zu kühlenden oder zu erwärmenden Wasser oder Luft in Berührung kommt;
- mechanischen Einrichtungen zur Unterstützung der Verbrennungsluft und/oder Abgasabführung.
Die oben genannten Geräte können eine oder mehrere Primär oder Sekundärfunktion(en) haben (d. h. Wärmerückgewinnung — siehe Begriffe in EN 12309 1:2023).
Bei (aus mehreren Teilen bestehenden) Verpackungseinheiten gilt dieses Dokument nur, wenn diese als vollständige Baugruppe ausgelegt und geliefert werden.
EN 12309 behandelt nicht die Geräte, deren Kondensator mit Luft oder durch Verdampfung von zusätzlichem Wasser auf der Außenseite gekühlt wird.
Anlagen für Heizung und/oder Kühlung industrieller Prozesse fallen nicht in den Anwendungsbereich von EN 12309.
Alle in diesem Dokument angegebenen Symbole werden unabhängig von der verwendeten Sprache verwendet.
1.2 Anwendungsbereich von EN 12309 6
Dieser Teil von EN 12309 legt die Verfahren zur Berechnung der saisonalen Effizienzkennzahlen für gasbefeuerte Sorptionsgeräte für Heizung und/oder Kühlung mit einer Nennwärmebelastung nicht über 70 kW fest. Er behandelt insbesondere die Verfahren zur Berechnung der Bezugswerte der saisonalen Effizienzkennzahlen im Kühl und Heizbetrieb für monovalente und bivalente Geräte.
Appareils à sorption fonctionnant au gaz pour le chauffage et/ou le refroidissement de débit calorifique sur PCI inférieur ou égal à 70 kW - Partie 6 : Calcul des performances saisonnières
Absorpcijske in adsorpcijske plinske naprave za gretje in/ali hlajenje z grelno močjo do vključno 70 kW - 6. del: Izračun sezonske zmogljivosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2023
Absorpcijske in adsorpcijske plinske naprave za gretje in/ali hlajenje z grelno
močjo do vključno 70 kW - 6. del: Izračun sezonske zmogljivosti
Gas-fired sorption appliances for heating and/or cooling with a net heat input not
exceeding 70 kW - Part 6: Calculation of seasonal performances
Gasbefeuerte Sorptions-Geräte für Heizung und/oder Kühlung mit einer
Nennwärmebelastung nicht über 70 kW - Teil 6: Berechnung der saisonalen
Effizienzkennzahlen
Appareils à sorption fonctionnant au gaz pour le chauffage et/ou le refroidissement de
débit calorifique sur PCI inférieur ou égal à 70 kW - Partie 6 : Calcul des performances
saisonnières
Ta slovenski standard je istoveten z: prEN 12309-6
ICS:
27.080 Toplotne črpalke Heat pumps
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
prEN 12309-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2022
ICS Will supersede EN 12309-6:2014
English Version
Gas-fired sorption appliances for heating and/or cooling
with a net heat input not exceeding 70 kW - Part 6:
Calculation of seasonal performances
Appareils à sorption fonctionnant au gaz pour le Gasbefeuerte Sorptions-Geräte für Heizung und/oder
chauffage et/ou le refroidissement de débit calorifique Kühlung mit einer Nennwärmebelastung nicht über 70
sur PCI inférieur ou égal à 70 kW - Partie 6 : Calcul des kW - Teil 6: Berechnung der saisonalen
performances saisonnières Effizienzkennzahlen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 299.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12309-6:2022 E
worldwide for CEN national Members.
prEN 12309-6:2022(E)
Contents Page
European foreword . 4
1 Scope . 5
1.1 Scope of EN 12309 . 5
1.2 Scope of this Part 6 to EN 12309 . 5
2 Normative references . 6
3 Terms and definitions . 6
4 Calculation methods for reference SGUE and SAEF in cooling mode . 6
4.1 General. 6
4.2 Part load conditions . 7
4.2.1 General. 7
4.2.2 Air-to-water appliances . 7
4.2.3 Water-to-water and brine-to-water appliances . 8
4.3 Calculation of reference SGUEc . 8
4.4 Calculation of reference SAEFc . 9
4.5 Calculation of reference annual cooling demand (Q ) . 10
refc
4.6 Calculation of reference SAEFc . 10
on
4.7 Procedures for the determination of GUEc / AEFc values . 10
5 Calculation methods for reference seasonal performance in heating mode . 11
5.1 General. 11
5.2 Part load conditions . 12
5.2.1 General. 12
5.2.2 Air-to-water appliances . 13
5.2.3 Water-to-water and brine-to-water appliances . 16
5.3 Calculation of reference SPERh . 19
5.4 Calculation of reference SGUEh . 19
5.5 Calculation of reference SAEFh . 21
5.6 Calculation of reference annual heating demand (Q ) . 22
refh
5.7 Calculation of reference SAEFh . 22
on
5.8 Procedures for the determination of GUEh / AEFh values . 23
Annex A (informative) Calculation example for reference SGUEc and SAEFc . 24
Annex B (informative) Calculation example for reference SGUEh, SAEFh and SPERh . 26
Annex C (normative) Number of hours in thermostat off mode, stand-by mode and off mode
for reference SAEFc and SAEFh calculation . 28
Annex D (normative) Calculation of the reference seasonal performance in heating mode for
bivalent appliances . 32
D.1 General. 32
D.2 Determination of supplementary heater efficiency and heating capacity . 32
D.2.1 General. 32
D.2.2 Supplementary boiler . 32
prEN 12309-6:2022 (E)
D.2.3 Supplementary resistor. 33
D.3 Determination of GUEh and AEFh . 33
D.4 Seasonal performance figures for the bivalent appliance as a whole . 34
D.4.1 General . 34
D.4.2 Supplementary boiler . 34
D.4.3 Supplementary resistor. 35
D.5 Seasonal performance figures for the sole heat pumps appliance during active mode
................................................................................................................................................................... 36
Annex E (normative) Procedures for the determination of GUEh, AEFh and SAEFh value with
multiple identical heat pumps . 38
E.1 General . 38
E.2 Calculation procedure for GUEh and AEFh for fixed capacity heat pumps . 38
E.3 Calculation procedure for GUEh and AEFh for variable capacity heat pumps . 39
E.4 Calculation procedure for SAEFh . 40
Annex F (normative) Calculation of seasonal space heating energy efficiency for monovalent
or bivalent gas-driven sorption heat pump based heating appliances . 41
Annex ZA (informative) Relationship between this European Standard and the ecodesign
requirements of Commission Regulation (EU) No 813/2013 of 2 August 2013 [OJEU L
239/136, 6.9.2013] aimed to be covered . 44
Annex ZB (informative) Relationship between this European Standard and the energy
labelling requirements of Commission Delegated Regulation (EU) No 811/2013 of 18
February 2013 [OJEU L 239/1, 6.9.2013] aimed to be covered . 45
Bibliography . 47
prEN 12309-6:2022(E)
European foreword
This document (prEN 12309-6:2022) has been prepared by Technical Committee CEN/TC 299 “Gas-fired
sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and
domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12309-6:2014.
This document includes the following significant technical changes with respect to EN 12309-6:2014:
— Terminology has been aligned to Commission Regulation (EU) No 813/2013 of 2 August 2013 and
Commission Delegated Regulation (EU) No 811/2013 of 18 February 2013;
— Heating temperature profile 45 °C has been eliminated;
— Optional testing points have been added.
This standard comprises parts under the general title, Gas-fired sorption appliances for heating and/or
cooling with a net heat input not exceeding 70 kW. A list of all parts in a series can be found on the CEN
website.
This document will be reviewed whenever new mandates could apply.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA and ZB which are
integral parts of this document.
prEN 12309-6:2022 (E)
1 Scope
1.1 Scope of EN 12309
Appliances covered by this document include one or a combination of the following:
— gas-fired sorption chiller;
— gas-fired sorption chiller/heater;
— gas-fired sorption heat pump.
This document applies to appliances designed to be used for space heating or cooling or refrigeration
with or without heat recovery.
This document applies to appliances having flue gas systems of Type B and Type C (according to
EN 1749:2020) and to appliances designed for outdoor installations, including Type A. EN 12309 does
not apply to air conditioners, it only applies to appliances having:
— integral burners under the control of fully automatic burner control systems,
— closed system refrigerant circuits in which the refrigerant does not come into direct contact with the
water or air to be cooled or heated,
— mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see
definitions in prEN 12309-1:2022).
In the case of packaged units (consisting of several parts), this European Standard applies only to those
designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water
are not covered by EN 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.