Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety

1.1   Scope of EN 12309 series
Appliances covered by this European Standard include one or a combination of the following:
―   gas fired sorption chiller;
―   gas fired sorption chiller/heater;
―   gas fired sorption heat pump.
This European Standard applies to appliances only when used for space heating and cooling with or without heat recovery.
This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having:
―   integral burners under the control of fully automatic burner control systems;
―   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated;
―   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in prEN 12309 1:2012). In the case of packaged units (consisting of several parts), the standard applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard.
Installations used for heating and/or cooling of industrial processes are not within the scope of these standards.
NOTE   All the symbols given in this text are used regardless of the language used.
1.2   Scope of this Part 2 to EN 12309
This part of EN 12309 deals with the safety of gas-driven sorption heat pumps as defined in prEN 12309 1. Only types B12 for outdoor installations, B13 for outdoor installations, B22 for outdoor installations, B23 for outdoor installations, C12 and C13, C32 and C33 are covered in this European Standard.

Gasbefeuerte Sorptions-Geräte für Heizung und/oder Kühlung mit einer Nennwärmebelastung nicht über 70 kW - Teil 2: Sicherheit

Geräte nach dieser Europäischen Norm beinhalten eine oder eine Kombination der folgenden Funktionen:
   gasbefeuertes Sorptionskühlgerät;
   gasbefeuertes Sorptionskühl / heizgerät;
   gasbefeuerte Sorptionswärmepumpe.
Diese Europäische Norm gilt ausschließlich für Geräte für die Raumheizung oder -kühlung mit oder ohne Wärmerückgewinnung.
Diese Europäische Norm gilt für Geräte mit Abgassystemen der Bauart B und C (nach CEN/TR 1749) sowie für Geräte zur Installation im Freien. EN 12309 ist nicht für Klimageräte anwendbar, sondern gilt ausschließlich für Geräte mit:
   integrierten Brennern, gesteuert mittels Feuerungsautomaten;
   geschlossenen Kühlkreisläufen, in denen das Kühlmittel nicht direkt mit dem/der zu kühlenden oder zu erwärmenden Wasser oder Luft in Berührung kommt;
   mechanischen Einrichtungen zur Unterstützung der Verbrennungsluftzufuhr und/oder Abgasabführung.
Die vorstehenden Geräte können eine oder mehrere Primär- oder Sekundärfunktion(en) aufweisen (d. h. Wärmerückgewinnung – siehe Begriffe nach EN 12309-1:2014). Bei (aus mehreren Teilen bestehenden) Verpackungseinheiten gilt diese Norm nur, wenn diese als vollständige Baugruppe ausgelegt und geliefert werden.
Diese Europäische Norm behandelt nicht Geräte, deren Kondensator mit Luft oder durch Verdampfung von zusätzlichem Wasser auf der Außenseite gekühlt wird.
Anlagen für Heizung und/oder Kühlung industrieller Prozesse fallen nicht in den Anwendungsbereich dieser Normen.
ANMERKUNG   Alle in diesem Text angegebenen Symbole sollten unabhängig von dessen jeweiliger Sprache verwendet werden.
Dieser Teil der EN 12309 behandelt die Sicherheit von gasbefeuerten Sorptionswärmepumpen, wie in EN 12309-1 definiert. Von dieser Europäischen Norm werden nur die Bauarten B12 für Installationen im Freien, B13 für Installationen im Freien, B22 für Installationen im Freien, B23 für Installationen im Freien, C12 und C13, C32 und C33 abgedeckt.

Appareils à sorption fonctionnant au gaz pour le chauffage et/ou le refroidissement de débit calorifique sur PCI inférieur à 70 kW - Partie 2 : Sécurité

1.1   Domaine d’application de la série EN 12309
Les appareils concernés par la présente Norme européenne sont les appareils suivants considérés isolément ou en combinaison :
-   groupe refroidisseur à sorption fonctionnant au gaz ;
-   groupe refroidisseur/réchauffeur à sorption fonctionnant au gaz ;
-   pompe à chaleur à sorption fonctionnant au gaz.
La présente Norme européenne s’applique aux appareils utilisés uniquement pour le chauffage ou le refroidissement de locaux avec ou sans récupération de chaleur.
La présente Norme européenne s’applique aux appareils comportant des systèmes d’évacuation des gaz de combustion de type B et C (conformément au CEN/TR 1749) et aux appareils conçus pour les installations extérieures. L’EN 12309 ne s’applique pas aux appareils de climatisation, mais uniquement aux appareils comportant :
-   des brûleurs intégrés sous le contrôle de systèmes de commande automatique ;
-   des circuits fermés de réfrigérant dans lesquels le réfrigérant ne vient pas en contact direct avec l’air ou l’eau à refroidir ou à chauffer ;
-   des moyens mécaniques pour l’alimentation en air de combustion et/ou l’évacuation des produits de combustion.
Les appareils susmentionnés peuvent présenter une ou plusieurs fonctions primaires ou secondaires (par exemple la récupération de chaleur - voir les définitions dans l’a prEN 12309 1:20142). Dans le cas des appareils fournis prêts à l’emploi (constitués de plusieurs éléments), la norme ne s’applique qu’à ceux conçus et fournis sous forme d’ensemble complet.
La présente Norme européenne ne couvre pas les appareils ayant leur condenseur refroidi par air et par évaporation d’eau d’un circuit supplémentaire externe.
Ces normes ne s’appliquent pas aux installations utilisées pour le chauffage et/ou le refroidissement des procédés industriels.
NOTE   Il convient d’utiliser tous les symboles spécifiés dans le présent document, quelle que soit la langue utilisée.
1.2   Domaine d’application de la présente Partie 2 de l’EN 12309
La présente partie de l’EN 12309 traite de la sécurité des pompes à chaleur à sorption fonctionnant au gaz, telles que définies dans l’a prEN 12309 1. La présente Norme européenne concerne uniquement les types B12 pour les installations extérieures, B13 pour les installations extérieures, B22 pour les installations extérieures et, B23 pour les installations extérieures ainsi que les types C12 et C13, C32 et C33.

Absorpcijske in adsorpcijske plinske naprave za gretje in/ali hlajenje z grelno močjo do vključno 70 kW - 2. del: Varnost

Naprave, zajete v teh standardih, vključujejo eno ali več kombinacij naslednjih elementov:
– absorpcijske in adsorpcijske plinske naprave za hlajenje;
– absorpcijske in adsorpcijske plinske naprave za hlajenje/gretje;
– absorpcijske in adsorpcijske plinske črpalke za gretje;
Ti standardi veljajo za naprave le, če se uporabljajo za ogrevanje in hlajenje prostora brez rekuperacije. Naprave so lahko monovalentne, dvovalentne ali hibridne. Ti standardi se uporabljajo za naprave s sistemi z odpadnimi plini vrste B in C (v skladu s CEN/TR 1749) in naprave, namenjene zunanji namestitvi. Ti evropski standardi se uporabljajo za naprave z eno ali dvema cevema.
Ti standardi se uporabljajo le za naprave s/z:
– integralnimi gorilniki s popolnoma avtomatskim sistemom kontrole;
– hladilnimi tokokrogi z zaprtim sistemom, pri katerih hladilno sredstvo ne pride v neposreden stik z vodo ali zrakom, ki se ohlaja ali segreva;
– mehanskimi sredstvi za pomoč pri transportu zraka za gorenje in/ali odpadnega plina.
Zgornje naprave imajo lahko eno ali več primarnih ali sekundarnih funkcij (tj. rekuperacija toplote – glej opredelitve iz standarda prEN 12309-1:2012), pri čemer se ta standard uporablja za vse take funkcije, pod pogojem, da je zadevna funkcija odvisna od kroženja tekočine (hladilnega sredstva in/ali raztopine) v tokokrogu(-ih) absorpcije, adsorpcije ali hladilne tekočine.
OPOMBA 1 Vsaka funkcija naprave, ki ni odvisna od kroženja tekočine v tokokrogu(-ih) absorpcije, adsorpcije ali hladilne tekočine, se oceni ločeno.
Ti standardi se uporabljajo za vse naprave, za katere naj bi se izvedel tipski preskus. Zahteve za naprave, za katere se ne izvaja tipski preskus, bi bilo treba dodatno proučiti. Pri pakiranih enotah (sestavljenih iz več kosov) se standard uporablja samo za tiste, ki so projektirane in dostavljene kot celoten paket. Ti standardi ne veljajo za klimatske naprave.
Ta standard ne zajema naprav, katerih kondenzator se hladi z zrakom in izhlapevanjem zunanje dodatne vode. Inštalacije, uporabljene za gretje in/ali hlajenje industrijskih procesov, niso zajete v teh standardih.
OPOMBA 2 Vsi simboli v tem besedilu se uporabljajo ne glede na uporabljen jezik.

General Information

Status
Published
Publication Date
19-May-2015
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
29-Jan-2021

Relations

Buy Standard

Standard
EN 12309-2:2015
English language
102 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12309-2:2013
English language
101 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gasbefeuerte Sorptions-Geräte für Heizung unde/oder Kühlung mit einer Nennwärmebelastung nicht über 70 kW - Teil 2: SicherheitAppareils à sorption à chauffage direct au gaz pour chauffage et/ou refroidissement d'un débit calorifique sur PCI inférieur à 70 kW - Partie 2: SécuritéGas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety27.080Heat pumps23.120QDSUDYHVentilators. Fans. Air-conditionersICS:Ta slovenski standard je istoveten z:EN 12309-2:2015SIST EN 12309-2:2015en,fr,de01-september-2015SIST EN 12309-2:2015SLOVENSKI
STANDARDSIST EN 12309-1:19991DGRPHãþD



SIST EN 12309-2:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12309-2
May 2015 ICS 27.080; 91.140.30 Supersedes EN 12309-1:1999English Version
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety
Appareils à sorption fonctionnant au gaz pour le chauffage et/ou le refroidissement de débit calorifique sur PCI inférieurà 70 kW - Partie 2 : Sécurité
Gasbefeuerte Sorptions-Geräte für Heizung und/oder Kühlung mit einer Nennwärmebelastung nicht über 70 kW -Teil 2: Sicherheit This European Standard was approved by CEN on 14 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12309-2:2015 ESIST EN 12309-2:2015



EN 12309-2:2015 (E) 2 Contents Page Foreword .6 1 Scope .8 1.1 Scope of EN 12309 series .8 1.2 Scope of this Part 2 to EN 12309 .8 2 Normative references .8 3 Terms and definitions . 10 4 Classification . 10 4.1 Classification of appliances . 10 4.1.1 Classification of gases . 10 4.1.2 Classification according to the mode of air supply and evacuation of the combustion products . 10 4.1.3 Classification according to the temperatures of the heat transfer media . 11 4.1.4 Classification according to denomination . 11 5 Construction and design requirements . 12 5.1 General . 12 5.1.1 Conversion to different gases .
...

SLOVENSKI STANDARD
oSIST prEN 12309-2:2013
01-julij-2013
$EVRUSFLMVNHLQDGVRUSFLMVNHNOLPDWVNHQDSUDYHLQDOLWRSORWQHþUSDONHVSOLQVNLP
RJUHYDQMHP]JUHOQRPRþMRGRYNOMXþQRN:GHO9DUQRVW
Gas-fired sorption appliances for heating and/or cooling with a net heat input not
exceeding 70 kW - Part 2: Safety
Gasbefeuerte Sorptions-Geräte für Heizung unde/oder Kühlung mit einer
Nennwärmebelastung nicht über 70 kW - Teil 2: Sicherheit
Appareils à sorption à chauffage direct au gaz pour chauffage et/ou refroidissement d'un
débit calorifique sur PCI inférieur à 70 kW - Partie 2: Sécurité
Ta slovenski standard je istoveten z: prEN 12309-2
ICS:
23.120 =UDþQLNL9HWUQLNL.OLPDWVNH Ventilators. Fans. Air-
QDSUDYH conditioners
27.080 7RSORWQHþUSDONH Heat pumps
oSIST prEN 12309-2:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12309-2:2013

---------------------- Page: 2 ----------------------
oSIST prEN 12309-2:2013


EUROPEAN STANDARD
DRAFT
prEN 12309-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2013
ICS 27.080; 91.140.30 Will supersede EN 12309-1:1999
English Version
Gas-fired sorption appliances for heating and/or cooling with a
net heat input not exceeding 70 kW - Part 2: Safety
Appareils à sorption à chauffage direct au gaz pour Gasbefeuerte Sorptions-Geräte für Heizung unde/oder
chauffage et/ou refroidissement d'un débit calorifique sur Kühlung mit einer Nennwärmebelastung nicht über 70 kW -
PCI inférieur à 70 kW - Partie 2: Sécurité Teil 2: Sicherheit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 299.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12309-2:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12309-2:2013
prEN 12309-2:2013 (E)
Contents Page
Foreword .6
1 Scope .7
2 Normative references .8
3 Terms and definitions .9
4 Classification .9
4.1 Classification of appliances .9
4.1.1 Classification of gases .9
4.1.2 Classification according to the mode of air supply and evacuation of the combustion
products .9
4.1.3 Classification according to the temperatures of the heat transfer media .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.