iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 3665:2013

(Main)

Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011)

Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011)

ISO 3665:2011 establishes a system for the classification of intra-oral radiographic film by the speed of the film/process system and by the size of the film. It specifies the sensitometric characteristics of the film/process systems, the physical characteristics of the film and packets, and it describes packaging and labelling requirements.
ISO 3665:2011 is applicable to intra-oral dental radiographic film for manual or automatic processing. It does not apply to films intended to be exposed with fluorescent intensifying screens, or films intended to be viewed primarily by reflected light.

Fotografie - Intraorale dentale Röntgenfilme und Filmpackungen - Herstellerangaben (ISO 3665:2011)

Diese Internationale Norm beschreibt ein System zur Einteilung intraoraler Röntgenfilme aufgrund der Empfindlichkeit des Film/Entwicklungssystems und der Filmgröße. Die Norm legt die sensitometrischen Eigenschaften des Film/Entwicklungssystems, die physikalischen Eigenschaften des Films und der Einzelfilmpackungen fest und beschreibt die Anforderungen an die Einzelfilmpackung und die Kennzeichnung.
Diese Internationale Norm gilt für intraorale zahnärztliche Röntgenfilme zur manuellen oder automatischen Verarbeitung. Sie gilt nicht für Filme, die zur Belichtung durch Verstärkerfolien vorgesehen sind oder für Filme, die vorrangig für die Auflicht-Betrachtung bestimmt sind.

Photographie - Film et paquets de films pour la radiographie dentaire intrabuccale - Spécifications (ISO 3665:2011)

Fotografija - Intraoralni dentalni radiografski film in zavoji filma - Specifikacije proizvajalca (ISO 3665:2011)

Standard ISO 3665:2011 vzpostavlja sistem za klasifikacijo intraoralnega radiografskega filma po hitrosti sistema filma/postopka in po velikosti filma. Določa senzitometrične lastnosti sistemov filma/postopka, fizikalne lastnosti filma in paketov ter opisuje zahteve za pakiranje in označevanje. Standard ISO 3665:2011 se uporablja za intraoralni dentalni radiografski film za ročno ali avtomatsko obdelavo. Ne uporablja se za filme, namenjene izpostavljenosti zaslonom s fluorescenčno ojačitvijo, ali za filme, primarno namenjene ogledu z odbito svetlobo.

General Information

Status
Published
Publication Date
19-Mar-2013
Withdrawal Date
29-Sep-2013
ICS
37.040.25 - Radiographic films
Technical Committee
CEN/TC 55 - Dentistry
Drafting Committee
CEN/TC 55 - Dentistry
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Mar-2013
Due Date
29-Jun-2014
Completion Date
20-Mar-2013
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Ref Project
SIST EN ISO 3665:2013 - Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011)

Buy Standard

EN ISO 3665:2013EN ISO 3665:2013
PreviousNext
Standard
EN ISO 3665:2013
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3665:2013
01-junij-2013
Fotografija - Intraoralni dentalni radiografski film in zavoji filma - Specifikacije
proizvajalca (ISO 3665:2011)
Photography - Intra-oral dental radiographic film and film packets - Manufacturer
specifications (ISO 3665:2011)
Fotografie - Intraorale dentale Röntgenfilme und Filmpackungen - Herstellerangaben
(ISO 3665:2011)
Photographie - Film et paquets de films pour la radiographie dentaire intrabuccale -
Spécifications (ISO 3665:2011)
Ta slovenski standard je istoveten z: EN ISO 3665:2013
ICS:
37.040.25 Radiografski filmi Radiographic films
SIST EN ISO 3665:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3665:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 3665:2013


EUROPEAN STANDARD
EN ISO 3665

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2013
ICS 37.040.25
English Version
Photography - Intra-oral dental radiographic film and film
packets - Manufacturer specifications (ISO 3665:2011)
Photographie - Film et paquets de films pour la Fotografie - Intraorale dentale Röntgenfilme und
radiographie dentaire intrabuccale - Spécifications (ISO Filmpackungen - Herstellerangaben (ISO 3665:2011)
3665:2011)
This European Standard was approved by CEN on 1 March 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3665:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3665:2013
EN ISO 3665:2013 (E)
Contents Page
Foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3665:2013
EN ISO 3665:2013 (E)
Foreword
The text of ISO 3665:2011 has been prepared by Technical Committee ISO/TC 42 “Photography” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 3665:2013 by
Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3665:2011 has been approved by CEN as EN ISO 3665:2013 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 3665:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 3665:2013
INTERNATIONAL ISO
STANDARD 3665
Third edition
2011-09-01
Photography — Intra-oral dental
radiographic film and film packets —
Manufacturer specifications
Photographie — Film et paquets de films pour la radio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 14096-1:2020(Main)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
SIST EN ISO 14096-1:2020

ISO 14096-1:2005 specifies procedures for the evaluation of basic performance parameters of the radiographic film digitisation process such as spatial resolution and spatial linearity, density range, density contrast sensitivity and characteristic transfer curve. They can be integrated into the system software and together with a standard reference film used for quality control of the digitisation process. This reference film provides a series of test targets for performance evaluation. The test targets are suitable for evaluating a digitisation system with a spatial resolution down to 25 micrometres, a density contrast sensitivity down to 0,02 optical density, a density range of 0,5 to 4,5 and a film size capacity of (350 x 430) mm2. This standard does not address signal processing and display of the digitised data.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14096-2:2020(Main)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
SIST EN ISO 14096-2:2020

ISO 14096-2:2005 specifies three film-digitisation quality classes for the requirements of non-destructive testing. The selected class depends on the radiation energy, penetrated material thickness and the quality level of the original radiographic film. ISO 14096-2:2005 does not address signal processing, display and storage of the digitised data.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11699-2:2018(Main)
Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018)
SIST EN ISO 11699-2:2018

This document specifies a procedure for the control of film processing systems.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11699-1:2011(Main)
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
SIST EN ISO 11699-1:2012

The purpose of ISO 11699-1:2008 is to establish the performance of film systems.
ISO 11699-1:2008 is applicable for the classification of film systems in combination with specified lead screens for industrial radiography (non-destructive testing). ISO 11699-1:2008 is intended to ensure that the image quality of radiographs – as far as this is influenced by the film system – is in conformity with the requirements of International Standards such as ISO 5579, ISO 17636 and EN 12681.
ISO 11699-1:2008 does not apply to the classification of films used with fluorescent intensifying screens. The measurement of film systems in ISO 11699-1:2008 is restricted to a selected radiation quality to simplify the procedure. The properties of films will change with radiation energy, but not the ranking of film system quality.
Additional methods for evaluating the photographic process are described in ISO 11699-2, by which the performance of film systems can be controlled under the conditions given in industry.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4090:2004(Main)
Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications (ISO 4090:2004)
SIST EN ISO 4090:2004

This International Standard specifies the nominal sizes, aim dimensions with tolerances, weights, and certain tests
for medical radiographic cassettes, screens, and films. It includes medical hard-copy imaging films in the form of
sheets, such as laser films and video.
This International Standard also includes information regarding the appropriate marking of these products, and
special attention is given to cassettes/screens/films used for mammography.
This International Standard does not include films in roll format (see informative annex A).

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 81060-2:2019/A2:2024(Amendment)
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 2 (ISO 81060-2:2018/Amd 2:2024)
SIST EN ISO 81060-2:2020/A2:2024
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day