Solid softwood panelling and cladding - Machined profiles without tongue and groove

This European Standard defines the characteristics of solid wood panelling and cladding without tongue and groove on edges, machined from the following most common European species of softwood: spruce/fir, pine, larch, European Douglas fir and maritime pine.
Products are intended for interior or exterior use.
Coatings and finishings are not dealt with in this European Standard.
NOTE   products sold in the European Economic Area will have to comply with EN 14915.

Innen- und Außenbekleidungen aus massivem Nadelholz - Profilholz ohne Nut und Feder

La présente Norme européenne définit les caractéristiques des lambris et bardages en bois massif résineux sans rainure et languette usinés à partir des essences résineuses les plus communes : sapin/épicéa, pin, mélèze, Douglas européen et pin maritime.
Les produits sont destinés à des emplois intérieur et extérieur.
NOTE   Les produits vendu dans l'espace économique européen doivent répondre au prEN 14915, en préparation.

Lambris et bardages en bois massif résineux - Profilés usinés sans rainure et languette

Diese Europäische Norm legt die Merkmale von Innen- und Außenbekleidungen aus Massivholz ohne Nut und Feder fest, die aus den folgenden weit verbreiteten europäischen Nadelholzarten hergestellt werden: Fichte/Tanne, Kiefer, Lärche, Europäische Douglasie und Seekiefer.
Die Produkte sind für die Verwendung im Innen  oder Außenbereich bestimmt.
ANMERKUNG   Produkte, die im Europäischen Wirtschaftsraum in den Verkehr gebracht werden, werden zukünftig prEN 14915 entsprechen müssen, die derzeit in Vorbereitung ist.

Notranje in zunanje obloge iz masivnega lesa - Profili brez utora in peresa

General Information

Status
Published
Publication Date
12-Dec-2006
Withdrawal Date
29-Jun-2007
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
28-Jun-2017

Buy Standard

Standard
EN 15146:2007
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 15146:2005
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Solid softwood panelling and cladding - Machined profiles without tongue and grooveNotranje in zunanje obloge iz masivnega lesa - Profili brez utora in peresaLambris et bardages en bois massif résineux - Profilés usinés sans rainure et languetteInnen- und Außenbekleidungen aus massivem Nadelholz - Profilholz ohne Nut und FederTa slovenski standard je istoveten z:EN 15146:2006SIST EN 15146:2007en79.080Polizdelki iz lesaSemi-manufactures of timberICS:SLOVENSKI
STANDARDSIST EN 15146:200701-marec-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15146December 2006ICS 79.080 English VersionSolid softwood panelling and cladding - Machined profileswithout tongue and grooveLambris et bardages en bois massif résineux - Profilésusinés sans rainure et languetteInnen- und Außenbekleidungen aus massivem Nadelholz -Profilholz ohne Nut und FederThis European Standard was approved by CEN on 5 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15146:2006: E



EN 15146:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 Symbols and abbreviations.6 5 Requirements.6 5.1 General.6 5.2 Appearance and finishing.6 5.2.1 General.6 5.2.2 Grading classes.7 5.2.3 Free grade.11 5.3 Moisture content.11 5.4 Geometrical characteristics.11 5.4.1 General.11 5.4.2 Profiles.11 5.4.3 Dimensions and tolerances.12 5.4.4 Machining.
...

EUROPEAN STANDARD
DRAFT
prEN 15146
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS
English version
Solid softwood panelling and cladding - Machined profiles
without tongue and groove
Lambris et bardages en bois massif résineux - Profilés Innen- und Außenbekleidungen aus massivem Nadelholz -
usinés sans rainure et languette Profilholz ohne Nut und Feder
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 175.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15146:2005: E
worldwide for CEN national Members.

---------------------- Page: 1 ----------------------
prEN 15146:2005 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope.5
2 Normative references.5
3 Terms and definitions .5
4 Symbols and abbreviations .6
5 Requirements.6
5.1 General.6
5.2 Appearance and finishing.6
5.2.1 General.6
5.2.2 Grading classes.6
5.2.3 Free Grade.11
5.3 Moisture content.11
5.4 Geometrical characteristics.11
5.4.1 General.11
5.4.2 Profiles.11
5.4.3 Dimensions and tolerances .12
5.4.4 Machining.14
5.5 Technical specifications.14
6 Sampling.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.