EN 13307-1:2006

Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements

This European Standard specifies requirements for timber blanks and semi-finished profiles for non-structural uses, including glued laminated and glued finger jointed products.  This Standard gives specific requirements for dimensions, stability and moisture content.  This Standard applies to hardwood and to softwood for use in joinery.
Production control requirements and tests are given in prCEN/TS 13307-2.

Holzkanteln und Halbfertigprofile für nicht tragende Anwendungen - Teil 1: Anforderungen

Diese Norm gibt Anforderungen für Kanteln und Rohprofile, sowohl in Vollholz als auch in lamellierter und keilgezinkter Form, an und befaßt sich mit Erzeugnissen, an die besondere Anforderungen hinsichtlich der Maße und des Stehvermögens gestellt werden. Die Norm ist sowohl auf Laubholz wie auch auf Nadelholz anzuwenden.

Ebauches et profilés semi-finis en bois pour usages non structurels - Partie 1 : Exigences

La présente norme européenne fournit des exigences pour les ébauches en bois et les profilés semi-finis pour
utilisations non structurelles, incluant les produits lamellés collés et aboutés collés. La présente norme fournit
des exigences particulières de dimensions, stabilité et teneur en humidité. La présente norme s’applique aux
bois feuillus et résineux utilisés en menuiserie.
Les exigences de contrôle de production et des essais sont donnés dans le prEN 13307-2.

Les in leseni polizdelki za profile za nekonstrukcijsko uporabo - 1. del: Zahteve

General Information

• Status: Published
• Publication Date: 07-Nov-2006
• Withdrawal Date: 30-Oct-2007
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 32 - Specific user requirements - Timber in joinery
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 28-Jun-2017
• Ref Project: SIST EN 13307-1:2007 - Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Timber blanks and semi-finished profiles for non-structural uses - Part 1: RequirementsLes in leseni polizdelki za profile za nekonstrukcijsko uporabo - 1. del: ZahteveEbauches et profilés semi-finis en bois pour usages non structurels - Partie 1 : ExigencesHolzkanteln und Halbfertigprofile für nicht tragende Anwendungen - Teil 1: AnforderungenTa slovenski standard je istoveten z:EN 13307-1:2006SIST EN 13307-1:2007en79.080Polizdelki iz lesaSemi-manufactures of timberICS:SLOVENSKI
STANDARDSIST EN 13307-1:200701-marec-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13307-1November 2006ICS 79.080 English VersionTimber blanks and semi-finished profiles for non-structural uses- Part 1: RequirementsEbauches et profilés semi-finis en bois pour usages nonstructurels - Partie 1 : ExigencesHolzkanteln und Halbfertigprofile für nicht tragendeAnwendungen - Teil 1: AnforderungenThis European Standard was approved by CEN on 11 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13307-1:2006: E

Orientation of growth rings.11 Bibliography.12

Standard Number Title 1 prEN 942 Revised Timber in joinery - General requirements 2 EN 13307-1 Timber blanks and semi-finished profiles for non-structural uses –Part 1: Requirements 3 EN 14220 Timber and wood-based materials in external windows, external door leaves and external doorframes – Requirements and specifications 4 EN 14221 Timber and wood-based materials in internal windows, internal door leaves and internal doorframes – Requirements and specifications
Explanation Standards 3 and 4 rely on both Standards 1 and 2, and Standard 2 relies on 1. The revised prEN 942 contains changes which directly affect Standards 2, 3 and 4 and therefore shall be available before they can be used effectively. NOTE Following the completion of the Technical Enquiry for prEN 13307-2 Timber blanks and semi-finished profiles for non-structural uses – Part 2: Production control, it has been agreed to remove this Standard from the package.
As a result of the necessary changes it has been agreed to offer prEN 13307-2 as a CEN/TS. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

It provides a basis for contracts between the sellers of these semi-finished products and manufacturers of the end products.
The specifier should be aware that not all of the characteristics defined and/or classified by this standard may be relevant in any given application, especially if those characteristics are subsequently made good by the manufacturer of the end product. At the time of publication, no relevant test standard for delamination or for temperature stability of adhesives exists.

This Standard gives specific requirements for dimensions, stability and moisture content.
This Standard applies to hardwood and to softwood for use in joinery. Production control requirements and tests are given in prCEN/TS 13307-2. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For
...