EN 13183-2:2002

Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method

This European Standard defines a non-destructive method for estimating the moisture content of a piece of sawn timber using an electrical resistance moisture meter.
This standard applies to sawn timber, and timber which has been planed or surfaced by other means.

Feuchtegehalt eines Stückes Schnittholz - Teil 2: Schätzung durch elektrisches Widerstands-Messverfahren

Diese Europäische Norm legt ein zerstörungsfreies Verfahren zur Bestimmung des Feuchtegehaltes eines Stückes Schnittholz unter Verwendung eines nach dem Widerstandsprinzip arbeitenden elektrischen Holzfeuchtemess-gerätes fest.
Diese Norm gilt für Schnittholz und Holz, welches gehobelt oder anderweitig mechanisch oberflächenbearbeitet wurde.

Teneur en humidité d'une pièce de bois scié - Partie 2: Estimation par méthode électrique par résistance

La présente norme Européenne définit une méthode non destructive d'estimation de la teneur en humidité d'une pièce de bois, en utilisant un humidimètre à résistance électrique. Cette norme s'applique aux bois sciés et aux bois qui ont été rabotés ou surfacés par d'autres moyens.

Delež vlage v žaganem lesu – 2. del: Ocena z metodo električne upornosti

General Information

• Status: Published
• Publication Date: 16-Apr-2002
• Withdrawal Date: 30-Oct-2002
• ICS: 79.040 - Wood, sawlogs and sawn timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 1 - General matters, definitions, measurement methods
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 23-Jun-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13183-2:2003 - Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method

Relations

• Corrected By: EN 13183-2:2002/AC:2003 - Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RUQRVWLFeuchtegehalt eines Stückes Schnittholz - Teil 2: Schätzung durch elektrisches Widerstands-MessverfahrenTeneur en humidité d'une piece de bois scié - Partie 2: Estimation par méthode électrique par résistanceMoisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method79.040Les, hlodovina in žagan lesWood, sawlogs and sawn timberICS:Ta slovenski standard je istoveten z:EN 13183-2:2002SIST EN 13183-2:2003en01-oktober-2003SIST EN 13183-2:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13183-2April 2002ICS 79.040English versionMoisture content of a piece of sawn timber - Part 2: Estimationby electrical resistance methodTeneur en humidité d'une pièce de bois scié - Partie 2:Estimation par méthode électrique par résistanceFeuchtegehalt eines Stückes Schnittholz - Teil 2:Schätzung durch elektrisches Widerstands-MessverfahrenThis European Standard was approved by CEN on 29 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13183-2:2002 ESIST EN 13183-2:2003

(INFORMATIVE)
MOISTURE CONTENT OF A LOT6SIST EN 13183-2:2003

1: Determination byoven dry method.EN 1309-1:Round and sawn timber - Method of measurement of dimensions -Part 1: Sawn timber.EN 1310:Round and sawn timber - Method of measurement of features.EN 1311:Round and sawn timber - Method of measurement of biologicaldegrade.Annex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizationsof the following countries are bound to implement this European Standard: Austria, Belgium,Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and theUnited Kingdom.1 ScopeThis European Standard defines a non-destructive method for estimating the moisture contentof a piece of sawn timber using an electrical resistance moisture meter.This standard applies to sawn timber, and timber which has been planed or mechanicallysurfaced by other means.2
Normative referencesThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text, andthe publications are listed hereafter. For dated references, subsequent amendments to orrevisions of these publications apply to this European Standard only when
...