iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10027-1:1992

(Main)

Designation systems for steel - Part 1: Steel names, principal symbols

Designation systems for steel - Part 1: Steel names, principal symbols

This part of European standard EN 10027 sets out the rules for designating steel, by means of symbolic letters and numbers to express application and principal characteristics, eg mechanical, physical, chemical, so as to provide an abbreviated identification of steels.

Bezeichnungssysteme für Stähle - Teil 1: Kurznamen, Hauptsymbol

Zur kurzgefassten Identifizierung von Stählen legt diese europäische Norm die Regeln für die Bezeichnung der Stähle mittels Kennbuchstaben und -zahlen fest. Die Kennbuchstaben und -zahlen sind so gewählt, dass sie Hinweise auf wesentliche Merkmale, z.B. auf das Hauptanwendungsgebiet, auf mechanische oder physikalische Eigenschaften oder die Zusammensetzung geben.

Systèmes de désignation des aciers - Partie 1: Désignation symbolique, symboles principaux

La présente partie de la norme européenne 10027 fixe les règles de désignation symbolique des aciers, au moyen de symboles littéraux et numériques exprimant certaines caractéristiques de base, par exemple: principale application, caractéristiques mécaniques, physiques, chimiques afin d'identifier de façon abrégée les aciers.

Sistemi označevanja jekel - 1. del: Oznake jekel, osnovni znaki

General Information

Status
Withdrawn
Publication Date
14-Jul-1992
Withdrawal Date
09-Aug-2005
ICS
77.080.20 - Steels
Technical Committee
ECISS/TC 100 - General issues
Drafting Committee
ECISS/TC 7 - Conventional designation of steel
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
10-Aug-2005
Completion Date
10-Aug-2005
Mandate
M/BC/CEN/86/1 - ECISS - 1st programme
Ref Project
SIST EN 10027-1:1995 - Designation systems for steel - Part 1: Steel names, principal symbols

Relations

Replaced By
EN 10027-1:2005 - Designation systems for steels - Part 1: Steel names
Effective Date
22-Dec-2008

Buy Standard

EN 10027-1:1995EN 10027-1:1995
PreviousNext
Standard
EN 10027-1:1995
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bezeichnungssysteme für Stähle - Teil 1: Kurznamen, HauptsymbolSystemes de désignation des aciers - Partie 1: Désignation symbolique, symboles principauxDesignation systems for steel - Part 1: Steel names, principal symbols77.080.20JeklaSteels01.040.77Metalurgija (Slov
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10373:2021(Main)
Determination of the physical and mechanical properties of steels using models
SIST EN 10373:2021

This document specifies the method for the verification of models for the determination of the property data of steels and the validation of the modelling process. It is applicable where modelling of mechanical or physical properties is used to substitute conventional testing for specific inspection. Models can be based on statistical data, thermo-physical data or indirect measurement (e.g. measurement of magnetic or ultrasonic data), or a combination of these methods.
This document applies only for providing the properties of rolled and/or heat-treated products such as plates, sheets, strip, sections and bars.
This document is used to demonstrate the ability of the model to supply property data which is equivalent to data, measured by conventional testing.
Any self-learning system is excluded from the scope.
NOTE A self-learning, in the spirit of an auto-adaptive model, is a model which changes its internal parameters by itself.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10027-1:2016(Main)
Designation systems for steels - Part 1: Steel names
SIST EN 10027-1:2016

1.1   This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemical, so as to provide an abbreviated identification of steels.
NOTE   In the English language the designations covered by this European Standard are known as “steel names”; in the French language as “designation symbolique”; in the German language as “Kurznamen”.
1.2   This European Standard applies to steels specified in European Standards (EN), Technical Specifications (TS), Technical Reports (TR) and CEN member's national standards.
1.3   These rules may be applied to non-standardized steels.
1.4   A system of numerical designation of steels known as steel numbers is specified in EN 10027 2.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10027-2:2015(Main)
Designation systems for steels - Part 2: Numerical system
SIST EN 10027-2:2015

This European Standard sets out a numbering system, referred to as steel numbers, for the designation of steel grades. It deals with the structure of steel numbers and the organization for their registration, allocation and dissemination. Such steel numbers are complementary to steel names set out in EN 10027-1.
Application of this European Standard is obligatory for steels specified in European Standards. Application is optional for national steels and proprietary steels.
NOTE Although the scope of the systems is limited to steel, it is structured so as to be capable of being extended to include other industrially produced materials.
Steel numbers established according to this system have a fixed number of digits (see 5). They are better suited for data processing than steel names established according to EN 10027-1.
For steels specified in European Standards the application for allocation of steel numbers (see A.6 to A.9) is the responsibility of the ECISS Technical Committee concerned. For national steel grades, the responsibility is that of the national competent body.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10168:2004(Main)
Steel products - Inspection documents - List of information and description
SIST EN 10168:2004

This European Standard lists the information that may be communicated and includes a brief description in the inspection documents of iron and steel products as described in EN 10021 and EN 10204. By laying down standardized designations and definitions for information likely to appear in inspection documents and by introducing code numbers for each of the designated sections, this European Standard intends to contribute to the elimination of communication difficulties in European trade.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10020:2000(Main)
Definition and classification of grades of steel
SIST EN 10020:2000

This European Standard defines the term "steel" (see clause 2) and classifies steel grades into: - non alloy, stainless steel and other alloy steels by chemical composition (see clause 3); - main quality classes (see clause 4) defined by main property or application characteristics for non alloy, stainless and other alloy steels.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15349-2:2021(Main)
Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021)
SIST EN ISO 15349-2:2021

This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the low carbon content in unalloyed steel.
The method is applicable to carbon contents between 0,000 3 % (mass fraction) and 0,009 % (mass fraction).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10373:2021(Main)
Determination of the physical and mechanical properties of steels using models
SIST EN 10373:2021

This document specifies the method for the verification of models for the determination of the property data of steels and the validation of the modelling process. It is applicable where modelling of mechanical or physical properties is used to substitute conventional testing for specific inspection. Models can be based on statistical data, thermo-physical data or indirect measurement (e.g. measurement of magnetic or ultrasonic data), or a combination of these methods.
This document applies only for providing the properties of rolled and/or heat-treated products such as plates, sheets, strip, sections and bars.
This document is used to demonstrate the ability of the model to supply property data which is equivalent to data, measured by conventional testing.
Any self-learning system is excluded from the scope.
NOTE A self-learning, in the spirit of an auto-adaptive model, is a model which changes its internal parameters by itself.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 10367:2019(Main)
Alloyed steels - Determination of chromium content - Inductively coupled plasma optical emission spectrometric method
SIST-TP CEN/TR 10367:2019

This document specifies an inductively coupled plasma optical emission spectrometric method for the determination of the chromium content (mass fraction) between 5,0 % (m/m) and 27,0 % (m/m) in alloyed steels.
The method doesn't apply to alloyed steels having carbon contents higher than 1 % and niobium and/or tungsten contents higher than 0,1 %.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4945:2018(Main)
Steel - Determination of nitrogen - Spectrophotometric method (ISO 4945:2018)
SIST EN ISO 4945:2019

This document specifies a spectrophotometric method for the determination of nitrogen in steel.
The method is applicable to the determination of nitrogen mass fraction between 0,000 6 % and 0,050 % in low alloy steels and between 0,010 % and 0,050 % in high alloy steels.
The method does not apply to samples containing silicon nitrides or having silicon contents higher than 0,6 %.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10027-1:2016(Main)
Designation systems for steels - Part 1: Steel names
SIST EN 10027-1:2016

1.1   This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemical, so as to provide an abbreviated identification of steels.
NOTE   In the English language the designations covered by this European Standard are known as “steel names”; in the French language as “designation symbolique”; in the German language as “Kurznamen”.
1.2   This European Standard applies to steels specified in European Standards (EN), Technical Specifications (TS), Technical Reports (TR) and CEN member's national standards.
1.3   These rules may be applied to non-standardized steels.
1.4   A system of numerical designation of steels known as steel numbers is specified in EN 10027 2.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day