EN 1034-14:2005+A1:2009
(Main)Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
This European Standard applies to reel splitters intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2009". It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4).
This European Standard applies only to reel splitters with a movable knife and of the following designs:
- machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off;
- machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other.
This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform.
This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter.
NOTE Pulpers are dealt with in EN 1034-4.
This European Standard is not applicable to reel splitters which are manufactured before the date of publication of this EN.
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 14: Rollenspaltmaschinen
Diese Europäische Norm gilt für Rollenspaltmaschinen, die zur Verwendung bei der Papierherstellung
bestimmt sind und ist zusammen mit !EN 1034-1:2000A1:2010" anzuwenden. Sie behandelt alle
signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Rollenspaltmaschinen
zutreffen, wenn sie bestimmungsgemäß und unter Bedingungen, die vom Hersteller als Fehlanwendung
vernünftigerweise vorhersehbar sind, verwendet werden (siehe Abschnitt 4).
Diese Europäische Norm behandelt nur Rollenspaltmaschinen mit beweglichem Messer und folgender
Bauarten:
Maschinen mit einem vertikal bewegten Messer, das von oben auf die liegende Rolle, üblicherweise bis
hin zur Hülse gedrückt wird, sodass die Lagen der Papierwicklung nacheinander aufgetrennt werden und
herabfallen;
Maschinen mit angetriebenem und verfahrbarem Kreismesser, das die Wicklungslagen der Rolle in
horizontaler Richtung von oben beginnend sukzessive, üblicherweise bis hin zur Hülse schneidet, wobei
die durchtrennten Lagen der Papierwicklung nacheinander herabfallen.
Diese Europäische Norm gilt auch für die integrierten Förderbänder und die integrierte Schwenkbühne.
Diese Europäische Norm behandelt außerdem die Absturzgefahr an der Schnittstelle zwischen Rollenspaltmaschine
und einem Stofflöser, der mit einem integrierten Förderband der Rollenspaltmaschine beschickt
wird.
ANMERKUNG Stofflöser werden in EN 1034-4 behandelt.
Diese Europäische Norm gilt nicht für Rollenspaltmaschinen, die vor Veröffentlichung dieser EN hergestellt
wurden.
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 14: Cisailles à bobine
Cette Norme européenne s‘applique aux cisailles à bobine qui sont destinées à une utilisation dans la fabrication de papier et doit être appliquée conjointement avec l'!EN 1034-1:2000+A1:2010". Elle traite tous les phénomènes dangereux significatifs, situations et événements dangereux qui surviennent sur des cisailles à bobine lorsque celles-ci sont utilisées normalement et dans les conditions d’utilisation abusive qui peuvent raisonnablement être prévues par le fabricant (voir Article 4).
La présente norme traite uniquement les cisailles à bobine avec couteau mobile et conceptions suivantes :
— machine avec un couteau déplacé verticalement, qui est appuyé par le haut sur la bobine couchée, habituellement en direction du mandrin, de sorte que les couches de la bobine de papier sont séparées et tombent les unes après les autres ;
— machine avec couteau circulaire entraîné et déplaçable, qui coupe les couches d’enroulement de la bobine dans le sens horizontal en commençant par le haut, de façon successive et habituellement en direction du mandrin, les couches séparées de la bobine de papier tombant les unes après les autres.
Cette norme s‘applique également aux bandes transporteuses intégrées et à la pelle de relevage intégrée.
Cette norme traite également le phénomène dangereux de chute dans le triturateur au niveau de l’interface entre la cisaille à bobine et un triturateur, qui est alimenté avec une bande transporteuse intégrée de la cisaille à bobine.
NOTE Les triturateurs la présente dans EN 1034-4.
La présente Norme européenne n’est pas applicable aux cisailles à bobine qui ont été fabriquées avant la publication de ce document par le CEN.
Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja - 14. del: Stroji za rezanje zvitkov
Ta evropski standard velja za stroje za rezanje zvitkov, ki so namenjeni uporabi pri izdelavi papirja, in se uporablja skupaj z EN 1034-1:2000+A1:2010. Obravnava vse bistvene nevarnosti, nevarne situacije in nevarne dogodke, pomembne za stroje za rezanje papirja, ko se uporabljajo kot predvideno in pod pogoji napačne uporabe, ki jo proizvajalec lahko upravičeno predvidi (glej Klavzulo 4). Ta evropski standard velja le za stroje za rezanje zvitkov s premičnim nožem in z naslednjimi oblikami: - stroji z navpično premikajočim se nožem, ki se z vrha potisne navzdol na zvitek, navadno desno od sredine, tako da se plasti zvitega papirja ena po ena ločijo in odpadejo; - stroji z gnanim in premičnim krožnim nožem, ki zaporedno reže zvite plasti vodoravnega zvitka in začenja od zgoraj navzdol proti sredini, tako da odrezane plasti zvitega papirja odpadajo ena za drugo. Ta evropski standard velja tudi za integrirane transportne trakove in integrirane vrtljive platforme. Ta evropski standard zajema tudi varnostne ograje med strojem za rezanje zvitkov in razpuščevalnikom, ki ga napaja integrirani transportni trak stroja za rezanje zvitkov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 14: RollenspaltmaschinenSécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 14: Cisailles à bobineSafety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter85.100Oprema za papirno industrijoEquipment for the paper industry21.020Characteristics and design of machines, apparatus, equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1034-14:2005+A1:2009SIST EN 1034-14:2006+A1:2010en,fr01-februar-2010SIST EN 1034-14:2006+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1034-14:2005+A1
December 2009 ICS 85.100 Supersedes EN 1034-14:2005English Version
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 14: Cisailles à bobine
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 14: Rollenspaltmaschinen This European Standard was approved by CEN on 5 October 2005 and includes Amendment 1 approved by CEN on 17 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-14:2005+A1:2009: ESIST EN 1034-14:2006+A1:2010
Relationship between this European Standard and the Essential Requirements of EU Directive 93/87/EC . 15Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 16 Figures
Figure 1 — Example of a rell splitter with conveyor belts and pivoting platform . 6 Tables
Table 1 — List of significant hazards . 8 Table 2 — Methods used to verify safety requirements and/or measures . 13
The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this European Standard. For machines that have been designed and built according to the provisions of this C standard, the following stipulation applies: When provisions of this type C standard are different from those which are stated in
type B standards or from provisions made in !EN 1034-1:2000+A1:2010", the provisions of this type C standard take precedence over the provisions of the other standards. 1 Scope This European Standard applies to reel splitters intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4).
This European Standard applies only to reel splitters with a movable knife and of the following designs: machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off; machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other.
This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform. This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter. NOTE Pulpers are dealt with in EN 1034-4. This European Standard is not applicable to reel splitters which are manufactured before the date of publication of this EN. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 294:1992, Safety of machinery — Safety distances to prevent danger zones being reached by the upper limbs. EN 349:1993, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body. EN 418:1992, Safety of machinery — Emergency stop equipment — Functional aspects — Principles for design. SIST EN 1034-14:2006+A1:2010
EN 1760-2:2001, Safety of machinery — Pressure-sensitive safety devices — Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars.
EN 1837:1999, Safety of machinery — Intergal lighting of machines. EN 13023:2003, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy categories 2 and 3. EN 60204-1:1997, Safety of machinery — Electrical equipment — Part 1: General requirements
(IEC 60204-1:1997). EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989). EN 61000-6-2:2001, Electromagnetic compatibility (EMC) — Part 6-2: Generic standard — Immunity —
Part 2: Industrial environment (IEC 61000-6-2:1999, modified). EN 61496-1:2004, Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests (IEC 61496-1:2004, modified). prEN 61496-2:1997, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:1997, modified). EN ISO12100-1:2003, Safety of machinery — Basic concepts — General principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003). SIST EN 1034-14:2006+A1:2010
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.