EN 1034-3:2011

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders

This European Standard applies to rereelers and winders and applies together with
EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for the production of paper and board, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This European Standard does not apply to machines used in paper converting.
This European Standard is not applicable to rereelers and winders which are manufactured before the date of publication as an EN.

Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 3: Umroller und Rollenschneider

Diese Europäische Norm gilt für Umroller und Rollenschneidemaschinen und gilt zusammen mit EN 1034-1:2000+A1:2010. Sie behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungs-ereignisse für Umroller und Rollenschneidemaschinen, die bestimmungsgemäß und unter den vom Hersteller vorherzusehenden Bedingungen verwendet werden (siehe Abschnitt 4). Diese Europäische Norm gilt nicht für Maschinen der Papierverarbeitung. Diese Europäische Norm gilt nicht für Umroller und Rollenschneidemaschinen, die vor dem Datum der Veröf-fentlichung als europäische Norm hergestellt wurden.

Sécurité de machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 3: Visiteuses et bobineuses

La présente Norme européenne s'applique aux bobineuses et aux visiteuses et complète
l'EN 10341:2000+A1:2010. Elle traite tous les phénomènes, situations et événements dangereux significatifs
applicables aux bobineuses et aux visiteuses, lorsqu’elles sont utilisées normalement et dans les conditions
prévues par le fabricant (voir l’Article 4).
La présente Norme européenne ne s’applique pas aux machines de transformation du papier.
De plus, elle n’est pas applicable aux bobineuses et aux visiteuses fabriquées avant la date de publication en
tant qu'EN.

Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja - 3. del: Stroji za rezanje in navijanje

Ta evropski standard se uporablja za stroje za rezanje in navijanje ter se uporablja skupaj s standardom EN 1034-1 2000+A1:2010. Opisuje večja tveganja, nevarne situacije in nevarne dogodke v zvezi s stroji za izdelavo papirja in kartona, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji, ki jih določa proizvajalec (glejte točko 4).
Ta evropski standard se ne uporablja za stroje, ki se uporabljajo za obdelavo papirja. Ta evropski standard se ne uporablja za stroje za rezanje in navijanje, ki so bili izdelani, preden je bil objavljen kot standard EN.

General Information

• Status: Published
• Publication Date: 06-Dec-2011
• Withdrawal Date: 29-Jun-2012
• ICS: 85.100 - Equipment for the paper industry
• Technical Committee: CEN/TC 198 - Printing and paper machinery - Safety
• Drafting Committee: CEN/TC 198/WG 2 - Paper Machinery
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 09-May-2018
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1034-3:2012 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders

Relations

• Replaces: EN 1034-3:1999+A1:2009 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines
• Effective Date: 14-Dec-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.MHSicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 3: Umroller und RollenschneiderSécurité de machines - Exigences techniques de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 3 : Visiteuses et bobineusesSafety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders85.100Oprema za papirno industrijoEquipment for the paper industry21.020Characteristics and design of machines, apparatus, equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1034-3:2011SIST EN 1034-3:2012en,de01-februar-2012SIST EN 1034-3:2012SLOVENSKI
STANDARDSIST EN 1034-3:2000+A1:20101DGRPHãþD



SIST EN 1034-3:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1034-3
December 2011 ICS 85.100 Supersedes EN 1034-3:1999+A1:2009English Version
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
Sécurité de machines - Exigences techniques de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 3 : Visiteuses et bobineuses
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 3: Umroller und Rollenschneider This European Standard was approved by CEN on 29 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-3:2011: ESIST EN 1034-3:2012



EN 1034-3:2011 (E) 2 Contents Page Foreword . 4Introduction . 51Scope . 62Normative references . 63Terms and definitions . 74List of significant hazards . 95Safety requirements and/or measures . 125.1General . 125.2Workplaces, means of access, catwalks, passageways . 135.3Start-up warning device . 135.4Emergency stop device and braking system . 135.5Isolation and energy dissipation, prevention of unexpected start-up . 145.6Equipment for make-ready and maintenance . 145.7Equipment for cleaning and removal of broke and waste . 155.8Contro
...