EN 15573:2008

Earth-moving machinery - Design requirements for circulation on the road

This European Standard specifies the requirements for earth-moving machinery described in EN ISO 6165 [2], intended to travel on the road.
This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during on road travel of earth-moving machinery.
This European Standard does not apply to earth-moving machinery with a width exceeding 3 metres (see 4.2.5).
This European Standard does not apply to earth-moving machinery on legs e.g. walking excavators.
This European Standard does not cover the hazards relevant to non-riding and remote control earth-moving machinery.
This European Standard is not applicable to earth-moving machines manufactured before the publication date of this European Standard by CEN.

Erdbaumaschinen - Ausrüstungsanforderungen für den Betrieb auf der Straße

Diese Norm legt die Anforderungen an in der EN ISO 6165 beschriebene Erdbaumaschinen fest, die zum Fahren auf der Straße konstruiert sind.
Diese Norm legt die geeigneten technischen Maßnahmen zum Eliminieren oder Reduzieren von Risken fest, die sich aus den bedeutenden Gefahren, gefährlichen Situationen und Ereignissen bei der Fahrt von Erdbau¬maschinen auf der Straße ergeben können.
Diese Norm gilt nicht für Erdbaumaschinen, die sich auf Beinen (z. B. Schreit(kufen)bagger) bewegen.
Diese Norm behandelt keine Gefahren, die für führerlose Erdbaumaschinen von Bedeutung sind, d. h. gehgelenkt (flurgesteuert) oder daneben stehend, oder Erdbaumaschinen, die mit einer Fernsteuerung bedient werden.
Diese Norm ist nicht auf Erdbaumaschinen anwendbar, die vor dem Veröffentlichungsdatum der vorliegenden Norm durch CEN produziert wurden.

Engins de terrassement - Prescriptions de conception pour la circulation sur route

La présente Norme européenne spécifie les prescriptions applicables aux engins de terrassement décrits
dans l’EN ISO 6165 [2] et conçus pour circuler sur route.
La présente Norme européenne spécifie les mesures techniques appropriées pour éliminer ou réduire les
risques liés aux phénomènes dangereux significatifs, situations et événements dangereux significatifs
pendant la circulation sur route des engins de terrassement.
La présente Norme européenne ne s’applique pas aux engins de terrassement de largeur supérieure à 3 m
(voir 4.2.5).
La présente Norme européenne ne s’applique pas aux engins de terrassement sur jambes, par exemple, les
pelles araignées.
La présente Norme européenne ne couvre pas les phénomènes dangereux liés aux engins de terrassement
qui sont à conducteur non-porté ou commandés à distance.
La présente Norme européenne ne s’applique pas aux engins de terrassement fabriqués avant sa date de
publication par le CEN.

Stroji za zemeljska dela - Zahteve projektiranja za uporabo na cesti

General Information

• Status: Published
• Publication Date: 06-May-2008
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 1 - Earth-moving machinery - Safety
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 20-May-2021
• Ref Project: SIST EN 15573:2008 - Earth-moving machinery - Design requirements for circulation on the road

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2008
Stroji za zemeljska dela - Zahteve projektiranja za uporabo na cesti
Earth-moving machinery - Design requirements for circulation on the road
Erdbaumaschinen - Anforderungen an die Anwendung auf der Straße
Engins de terrassement - Prescriptions de conception pour la circulation sur route
Ta slovenski standard je istoveten z: EN 15573:2008
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 15573
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 53.100
English Version
Earth-moving machinery - Design requirements for circulation on
the road
Engins de terrassement - Prescriptions de conception pour Erdbaumaschinen - Anforderungen an die Anwendung auf
la circulation sur route der Straße
This European Standard was approved by CEN on 7 March 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15573:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.5
Introduction .6
1 Scope .7
2 Normative references .7
3 Terms and definitions .8
4 Safety requirements and/or protective measures.9
4.1 General safety .9
4.2 Dimensions and masses.9
4.2.1 General.9
4.2.2 Maximum mass .10
4.2.3 Maximum axle load.10
4.2.4 Maximum length.10
4.2.5 Maximum width.11
4.2.6 Maximum height.12
4.3 Speed .12
4.3.1 Speed marking .12
4.3.2 Speedometer .12
4.4 Road preservation .12
4.4.1 Tyres and rims .12
4.4.2 Tracks .13
4.5 Dynamic stability .13
4.6 Steering system .13
4.6.1 Power assisted steering.13
4.6.2 Full power steering.14
4.7 Brake systems.14
4.8 Trailer connections.14
4.8.1 Coupling devices .14
4.8.2 Braking.14
4.8.3 Lighting socket .15
4.9 Operator's station .15
4.9.1 Visibility .15
4.9.2 Mirrors.15
4.9.3 Restraint system.15
4.10 Operator's station equipped with an enclosed cab .15
4.10.1 Demisting and defrosting systems.15
4.10.2 Wiper systems.15
4.10.3 Doors and windows.16
4.11 Operator's controls and indicators.16
4.11.1 General.16
4.11.2 Inadvertent activation.16
4.11.3 Pedals .16
4.11.4 Operating instrumentation.16
4.12 Lighting, signalling and marking lights, and reflex-reflector devices.17
4.12.1 General.17
4.12.2 Width marker lamps .19
4.12.3 Special warning plates .20
4.13 Plates and inscriptions .21
4.13.1 Rear registration plate.21
4.13.2 Manufacturer’s plate.22
4.13.3 Identification Number.22
4.14 Warning devices .22
4.15 Noise emission measurement.22
4.15.1 Limits .22
4.15.2 Conditions of measurement.22
4.15.3 Method of Measurement .23
4.15.4 Interpretation of results .23
4.16 Protruding appliance protection.24
4.17 Uncontrolled motion .24
4.18 Fenders.24
4.19 Fuel tanks.24
5 Verification of safety requirements and/or protective measures.24
Annex A (informative) Speed marking signs.26
A.1 General .26
A.2 Colour .26
A.3 Size.26
Annex B (normative) Ground contact pressure.27
B.1 General .27
B.2 Definitions .27
B.2.1 Crawler base, L .27
B.2.2 Tread contact area, T .28
A
B.3 Requirements.28
B.3.1 Calculation of average ground contact pressure, PG – dual track systems.28
B.3.2 Calculation of average ground contact pressure, PG – multi-track systems .28
Annex C (normative) Braking requirements .29
C.1 Machines with a design speed ≤ 40 km/h .29
C.2 Machines with a design speed > 40 km/h .29
C.2.1 Test conditions.29
C.2.2 Performance tests .29
C.3 Machines with a hydrostatic drive system .30
C.3.1 General requirements .30
C.3.2 Failure of the brakes .31
C.3.3 Brake testing.32
C.3.
...