EN ISO 1043-4:1999

Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998)

Provides uniform symbols for flame retardants added to plastic materials. The symbols are written with the abbreviated term "FR" and one or more succeeding code numbers as given in clause 5. They are used in addition to the symbols for the plastics materials, for plastics material designation and for identification and marking of plastics products

Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 4: Flammschutzmittel (ISO 1043-4:1998)

Dieser Teil von ISO 1043 stellt einheitliche Kurzzeichen für Flammschutzmittel,die in Kunststoffen eingesetzt werden, zur Verfügung. Die Kurzzeichen setzen sich aus der Bezeichnung "FR" und einer oder mehreren nachfolgenden Codenummern zusammen, die in Abschnitt 5 gegeben sind. Sie werden zusätzlich zur Material- kennzeichnung für Kunstoffe benutzt.

Plastiques - Symboles et abréviations - Partie 4: Ignifuges (ISO 1043-4:1998)

La présente partie de l'ISO 1043 prescrit les symboles uniformes à utiliser pour qualifier les ignifugeants ajoutés aux matières plastiques. Ces symboles se composent de l'abréviation «FR» suivie d'un ou plusieurs des codes numériques donnés dans l'article 5. Ces symboles viennent s'ajouter aux symboles qualifiant les plastiques eux-mêmes, pour la désignation du matériau plastique et le marquage des produits plastiques.

Polimerni materiali - Simboli in kratice - 4. del: Zaviralci gorenja (ISO 1043-4:1998)

Vsebuje enotne simbole za zaviralce gorenja, ki so dodani polimernim materialom. Simboli so zapisani s kratico »FR« in eno ali več zaporednimi kodami, podanimi v točki 5. Uporabljajo se poleg simbolov za polimerne materiale, opise polimernih materialov ter prepoznavanje in označevanje polimernih izdelkov.

General Information

• Status: Withdrawn
• Publication Date: 18-May-1999
• Withdrawal Date: 03-Aug-2021
• ICS: 83.040.30 - Auxiliary materials and additives for plastics
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/SC 1/WG 1 - Terminology, generic marking, symbols and codes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Aug-2021
• Ref Project: SIST EN ISO 1043-4:2000 - Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998)

Relations

• Replaced By: EN ISO 1043-4:2021 - Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:2021)
• Effective Date: 11-Aug-2021
• Amended By: EN ISO 1043-4:1999/A1:2016 - Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1043-4:2000
01-maj-2000
Polimerni materiali - Simboli in kratice - 4. del: Zaviralci gorenja (ISO 1043-4:1998)
Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998)
Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 4: Flammschutzmittel (ISO 1043-
4:1998)
Plastiques - Symboles et abréviations - Partie 4: Ignifuges (ISO 1043-4:1998)
Ta slovenski standard je istoveten z: EN ISO 1043-4:1999
ICS:
01.075 Simboli za znake Character symbols
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 1043-4:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1043-4:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 1043-4:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 1043-4:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 1043-4:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 1043-4:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 1043-4:2000
INTERNATIONAL ISO
STANDARD 1043-4
First edition
1998-02-15
Plastics — Symbols and abbreviated
terms —
Part 4:
Flame retardants
Plastiques — Symboles et abréviations —
Partie 4: Ignifuges
A
Reference number
ISO 1043-4:1998(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 1043-4:2000
ISO 1043-4:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 1043-4 was prepared by Technical Committee
ISO/TC 61, Plastics, Subcommittee SC 1, Terminology.
ISO 1043 consists of the following parts, under the general title Plastics —
Symbols and abbreviated terms:
— Part 1: Basic polymers and their special characteristics
— Part 2: Fillers and reinforcing materials
— Part 3: Plasticizers
— Part 4: Flame retardants
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 1043-4:2000
©
INTERNATIONAL STANDARD  ISO ISO 1043-4:1998(E)
Plastics — Symbols and abbreviated terms —
Part 4:
Flame retardants
1  Scope
This part of ISO 1043 provides uniform symbols for flame retardants added to plastics materials. The symbols are
written with the abbreviated term “FR” and one or more succeeding code numbers as given in clause 5. They are
used in addition to the symbols for the plastics materials, for plastics material designation and for identification and
marking of plastics products.
2  Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of
ISO 1043. At the time of publication, the editions indicated were valid. All standards are subject to revision, and
parties to agreements based on this part of ISO 1043 are encouraged to investigate the possibility of applying the
most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid
International Standards.
ISO 1043-1:1997, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special
characteristics.
ISO 1043-2:1988, Plastics — Symbols — Part 2: Fillers and reinforcing materials.
ISO 1043-3:1996, Plastics — Symbols and abbreviated terms — Part 3: Plasticizers.
3  Definition
For the purposes of this part of ISO 1043, the following definition applies:
3.1  flame retardant: A substance that markedly retards the propagation of a flame.
NOTE —  Included are flame retardants that are incorporated in prepolymers.
4  Application of symbols
The symbols are written with the abbreviated term “FR”, in capital letters, followed, without a
...