EN ISO 10209:2012

Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation (ISO 10209:2012)

ISO 10209:2012 establishes and defines terms used in technical product documentation relating to technical drawings, product definition and related documentation in all fields of application.
This vocabulary is based on all terms contained within ISO/TC 10 standards and other documents that are relevant to technical product documentation irrespective of disciplines. The terms have been classified into specific fields of application.
In addition to terms and definitions used in English and French, two of the three official ISO languages, ISO 10209:2012 gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN), and are given for information only. Only the terms and definitions given in the official languages can be considered ISO terms and definitions.

Technische Produktdokumentation - Vokabular - Begriffe für technische Zeichnungen, Produktdefinition und verwandte Dokumentation (ISO 10209:2012)

Dieser Teil der ISO 10209 definiert und legt Begriffe fest, die in der technischen Produktdokumentation
Anwendung finden und sich auf technische Zeichnungen, Produktdefinitionen und die zugehörige Dokumentation
in allen Einsatzbereichen beziehen.
Diese Dokumentation umfasst alle Begriffe, die in den Normen des ISO/TC 10 enthalten und für die
technische Produktdokumentation relevant sind, unabhängig von den Fachgebieten. Die Begriffe wurden in
bestimmte Einsatzbereiche unterteilt.
Neue Begriffe, die von den Unterkomitees und Arbeitsgruppen des ISO/TC 10 für neue oder überarbeitete
Normen gefordert werden, müssen von der Fachgruppe zur Terminologiepflege des ISO/TC 10 ratifiziert
werden und in zukünftige Änderungen dieser Norm aufgenommen werden.
ANMERKUNG Unter Berücksichtigung der üblichen Vorgehensweise wird, wenn ein Begriff zwei oder mehr
Definitionen hat, die bevorzugte Definition gekennzeichnet.

Documentation technique de produits - Vocabulaire - Termes relatifs aux dessins techniques, à la définition de produits et à la documentation associée (ISO 10209:2012)

L'ISO 10209:2012 établit et définit les termes utilisés dans la documentation technique de produit relatifs aux dessins techniques, à la définition de produits et à la documentation y associée dans tous les champs d'application.
Le présent vocabulaire est fondé sur l'ensemble des termes contenus dans les normes de l'ISO/TC 10 et dans d'autres documents qui couvrent la documentation technique de produits, quelles qu'en soient les disciplines. Les termes ont été classés en champs d'application spécifiques.
En complément des termes et définitions utilisés en anglais et en français, deux des trois langues officielles de l'ISO, l'ISO 10209:2012 donne les termes équivalents en langue allemande; ces termes sont publiés sous la responsabilité du comité membre allemand (DIN), et sont donnés uniquement pour information. Seuls les termes et définitions donnés dans les langues officielles peuvent être considérés comme étant des termes et des définitions de l'ISO.

Tehnična dokumentacija izdelkov - Slovar - Izrazi, ki se nanašajo na tehnično risanje, definicijo proizvoda in sorodne proizvode (ISO 10209:2012)

Ta mednarodni standard določa in opredeljuje izraze v zvezi s tehnično dokumentacijo izdelka, ki se nanašajo na tehnično risanje, definicijo izdelka in sorodno dokumentacijo na vseh področjih uporabe. Ta slovar temelji na vseh izrazih iz standardov ISO/TC 10 in drugih dokumentov, ki so pomembni za tehnično dokumentacijo izdelka ne glede na področja. Izrazi so razvrščeni glede na področja uporabe. Nove izraze, ki jih zahtevajo pododbori ISO/TC 10 in delovne skupine za nove ali revidirane standarde, bo potrdila skupina za posodabljanje slovarja ISO/TC 10, pri čemer jih bo vključila v nove izdaje tega mednarodnega standarda.

General Information

• Status: Withdrawn
• Publication Date: 14-Jul-2012
• Withdrawal Date: 15-Mar-2022
• ICS: 01.040.01 - Generalities. Terminology. Standardization. Documentation (Vocabularies)
• ICS: 01.110 - Technical product documentation
• Technical Committee: CEN/SS F01 - Technical drawings
• Drafting Committee: CEN/SS F01 - Technical drawings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 16-Mar-2022
• Ref Project: SIST EN ISO 10209:2012 - Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation (ISO 10209:2012)

Relations

• Replaces: EN ISO 10209-2:1996 - Technical product documentation - Vocabulary - Part 2: Terms relating to projection methods (ISO 10209-2:1994)
• Effective Date: 25-Jul-2012
• Replaced By: EN ISO 10209:2022 - Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation (ISO 10209:2022)
• Effective Date: 23-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2012
1DGRPHãþD
SIST EN ISO 10209-2:1998
7HKQLþQDGRNXPHQWDFLMDL]GHONRY6ORYDU,]UD]LNLVHQDQDãDMRQDWHKQLþQR
ULVDQMHGHILQLFLMRSURL]YRGDLQVRURGQHSURL]YRGH,62
Technical product documentation - Vocabulary - Terms relating to technical drawings,
product definition and related documentation (ISO 10209:2012)
Technische Produktdokumentation - Vokabular - Begriffe für technische Zeichnungen,
Produktdefinition und verwandte Dokumentation (ISO 10209:2012)
Documentation technique de produits - Vocabulaire - Termes relatifs aux dessins
techniques, à la définition de produits et à la documentation associée (ISO 10209:2012)
Ta slovenski standard je istoveten z: EN ISO 10209:2012
ICS:
01.040.01 Splošno. Terminologija. Generalities. Terminology.
Standardizacija. Standardization.
Dokumentacija (Slovarji) Documentation
(Vocabularies)
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 10209
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2012
ICS 01.040.01; 01.110 Supersedes EN ISO 10209-2:1996
English Version
Technical product documentation - Vocabulary - Terms relating
to technical drawings, product definition and related
documentation (ISO 10209:2012)
Documentation technique de produits - Vocabulaire - Technische Produktdokumentation - Vokabular - Begriffe
Termes relatifs aux dessins techniques, à la définition de für technische Zeichnungen, Produktdefinition und
produits et à la documentation associée (ISO 10209:2012) verwandte Dokumentation (ISO 10209:2012)
This European Standard was approved by CEN on 6 July 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10209:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 10209:2012) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10209-2:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10209:2012 has been approved by CEN as a EN ISO 10209:2012 without any modification.

INTERNATIONAL ISO
STANDARD 10209
NORME
First edition
Première édition
INTERNATIONALE
2012-07-15
Technical product documentation —
Vocabulary — Terms relating to technical
drawings, product definition and related
documentation
Documentation technique de produits —
Vocabulaire — Termes relatifs aux
dessins techniques, à la définition de
produits et à la documentation associée
Technische Produktdokumentation —
Vokabular — Begriffe für technische
Zeichnungen, Produktdefinition und
verwandte Dokumentation
Reference number
Numéro de référence
ISO 10209:2012(E/F)
©
ISO 2012
ISO 10209:2012(E/F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT

©  ISO 2012
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland/Publié en Suisse

ii © ISO 2012 – All rights reserved/Tous droits réservés

ISO 10209:2012(E/F)
Contents Page
Foreword . vii
1 Scope . 1
2 General terms . 2
3 Views . 22
4 Dimensions . 34
5 Lines . 37
6 Tolerances . 39
7 Graphics . 40
8 Symbology . 42
9 3D Modelling . 48
10 Computer-related terms. 53
11 Documentation . 55
12 Document management. 86
Annex A (informative) Deprecated definitions from former parts of ISO 10209 . 92
Bibliography . 95
Alphabetical index . 99
French alphabetical index (Index alphabétique) . 103
German alphabetical index (Alphabetisches Verzeichnis) . 107

ISO 10209:2012(E/F)
Sommaire Page
Avant-propos . viii
1 Domaine d'application . 1
2 Termes généraux . 2
3 Vues . 22
4 Cotes et dimensions . 34
5 Traits et lignes . 37
6 Tolérances . 39
7 Graphiques . 40
8 Symboles . 42
9 Modélisation 3D . 48
10 Termes informatiques . 53
11 Documentation . 55
12 Gestion de documents . 86
Annexe A (informative) Définitions déconseillées provenant de parties précédentes de l'ISO 10209 . 92
Bibliographie . 95
Index alphabétique anglais (Alphabetical index) . 99
Index alphabétique . 103
Index alphabétique allemand (Alphabetisches Verzeichnis) . 107

iv © ISO 2012 – All rights reserved/Tous droits réservés

ISO 10209:2012(E/F)
Inhalt Seite
Vorwort . ix
1 Anwendungsbereich . 1
2 Allgemeine Begriffe . 2
3 Ansichten . 22
4 Maße . 34
5 Linien .
...

SLOVENSKI STANDARD
oSIST prEN ISO 10209:2010
01-junij-2010
7HKQLþQDGRNXPHQWDFLMDL]GHONRY6ORYDU,]UD]LNLVHQDQDãDMRQDWHKQLþQR
ULVDQMHSURMHNFLMVNRGHILQLFLMRLQVRURGQHSURL]YRGH,62',6
Technical product documentation - Vocabulary - Terms relating to technical drawings,
product definition and related products (ISO/DIS 10209:2010)
Technische Produktdokumentation - Vokabular - Begriffe für technische Zeichnungen,
Produktdefinition und verwandte Dokumentation (ISO/DIS 10209:2010)
Documentation technique de produits - Vocabulaire - Termes relatifs aux dessins
techniques, à la définition de produits et à la documentation y relative (ISO/DIS
10209:2010)
Ta slovenski standard je istoveten z: prEN ISO 10209
ICS:
01.040.01 Splošno. Terminologija. Generalities. Terminology.
Standardizacija. Standardization.
Dokumentacija (Slovarji) Documentation
(Vocabularies)
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
oSIST prEN ISO 10209:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 10209:2010
oSIST prEN ISO 10209:2010
EUROPEAN STANDARD
DRAFT
prEN ISO 10209
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2010
ICS 01.040.01; 01.110 Will supersede EN ISO 10209-2:1996
English Version
Technical product documentation - Vocabulary - Terms relating
to technical drawings, product definition and related products
(ISO/DIS 10209:2010)
Documentation technique de produits - Vocabulaire - Technische Produktdokumentation - Vokabular - Begriffe
Termes relatifs aux dessins techniques, à la définition de für technische Zeichnungen, Produktdefinition und
produits et à la documentation y relative (ISO/DIS verwandte Dokumentation (ISO/DIS 10209:2010)
10209:2010)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/SS F01.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 10209:2010: E
worldwide for CEN national Members.

oSIST prEN ISO 10209:2010
prEN ISO 10209:2010 (E)
Contents Page
Foreword .3

oSIST prEN ISO 10209:2010
prEN ISO 10209:2010 (E)
Foreword
This document (prEN ISO 10209:2010) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation".
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 10209-2:1996.
Endorsement notice
The text of ISO/DIS 10209:2010 has been approved by CEN as a prEN ISO 10209:2010 without any
modification.
oSIST prEN ISO 10209:2010
oSIST prEN ISO 10209:2010
DRAFT INTERNATIONAL STANDARD ISO/DIS 10209
ISO/TC 10 Secretariat: SIS
Voting begins on: Voting terminates on:
2010-04-01 2010-09-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Technical product documentation — Vocabulary — Terms
relating to technical drawings, product definition and related
products
Documentation technique de produits — Vocabulaire — Termes relatifs aux dessins techniques, à la définition
de produits et à la documentation y relative
(Revision of ISO 10209-1:1992, ISO 10209-2:1993 and ISO 10209-4:1999)
ICS 01.040.01; 01.110
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2010

oSIST prEN ISO 10209:2010
ISO/DIS 10209
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2010 – All rights reserved

oSIST prEN ISO 10209:2010
oSIST prEN ISO 10209:2010
ISO/DIS 10209
Contents Page
1 Scope .4
2 General terms.4
3 Views. 15
4 Dimensions. 23
5 Lines. 25
6 Tolerances. 27
7 Graphics . 27
8 Symbology. 28
9 3D Modelling. 32
10 Computer-related terms . 35
11 Documentation. 36
12 Document Management . 52
Annex A (informative) Tree structure of the vocabulary for technical product documentation. 56
Annex B (informative) Obsolete terms. 73
Index . 74

2 © ISO 2010 – All rights reserved

oSIST prEN ISO 10209:2010
ISO/DIS 10209
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
ISO 10209 was prepared by Technical Committee ISO/TC 10, Technical product documentation.
This standard cancels and replaces ISO 10209-1, ISO 10209-2 and ISO 10209-4.
oSIST prEN ISO 10209:2010
ISO/DIS 10209
1 Scope
This part of ISO 10209 establishes and defines terms used in technical product documentation relating to
technical drawings, product definition and related documentation in all fields of application.
This documentation includes all terms contained within ISO/TC 10 standards that are relevant to technical
product documentation irrespective of disciplines. The terms have been classified into specific fields of
application.
New terms required by ISO/TC 10 Sub Committees and Working Groups for new or revised standards shall
be ratified by the ISO/TC 10 Vocabulary maintenance team and included in future amendments of this
standard.
NOTE From point of historical reason, where a term has two or more definitions the preferred definition is identified.
2 General terms
2.1
activity
processes, procedures or parts of them, usually related to established organization units
[ISO 15226:1999]
2.2
activity matrix
matrix allocating activities to phases of the product life cycle and to a fixed organization unit
[ISO 15226:1999]
2.3
address
specification of the postal delivery or the geographical location of an organization
[ISO 81714-2:1998]
2.4
analysis
part of the product development process where a specification of requirements is prepared
[ISO 11442:2006]
2.5
ancillary system
system which is not directly required for the plant process
[ISO/DTS 16952-10]
NOTE This includes heating, ventilation, air-conditioning systems, space heating systems, stationary compressed air
supplies, fire protection systems, cranes, elevators, workshops, staff amenity etc.
2.6
application reference model
information model that formally describes the information requirements and constraints for an application area
[ISO 82045-2:2004]
2.7
aspect
specific way of selecting information on, or describing, a system or an object of a system
4 © ISO 2010 – All rights reserved

oSIST prEN ISO 10209:2010
ISO/DIS 10209
[ISO 82045-1:2001] [ISO/CD 15519-1]
2.8
assembly
number of component parts fitted together to perform a specific function
[ISO 7573]
2.9
authorization
(of a user) privileges that give access
...