CEN/TR 16563:2013
(Main)Principles of the equivalent durability procedure
Principles of the equivalent durability procedure
This Technical Report sets out the principles of the equivalent durability procedure. It provides guidance on the selection of the reference value, production control, evaluation of conformity and the exchange of information between the parties.
Verfahrensgrundsätze zum Nachweis gleichwertiger Dauerhaftigkeit
Principes de la procédure de durabilité équivalente
Le présent Rapport technique établit les principes de la procédure de durabilité équivalente. Il fournit des lignes directrices relatives à la sélection de la valeur de référence, du contrôle de la production, de l’évaluation de la conformité et de l’échange d’informations entre les parties.
Postopkovna načela za ugotavljanje trajnosti
To tehnično poročilo določa postopkovna načela za ugotavljanje trajnosti. Podaja napotke glede izbire referenčne vrednosti, nadzora proizvodnje, vrednotenja skladnosti in izmenjave informacij med strankami.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 16563:2013
01-december-2013
3RVWRSNRYQDQDþHOD]DXJRWDYOMDQMHWUDMQRVWL
Principles of the equivalent durability procedure
Verfahrensgrundsätze zum Nachweis gleichwertiger Dauerhaftigkeit
Principes de la procédure de durabilité équivalente
Ta slovenski standard je istoveten z: CEN/TR 16563:2013
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST-TP CEN/TR 16563:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 16563:2013
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 16563:2013
TECHNICAL REPORT
CEN/TR 16563
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
August 2013
ICS 91.100.30
English Version
Principles of the equivalent durability procedure
Principes de la procédure de durabilité équivalente Verfahrensgrundsätze zum Nachweis gleichwertiger
Dauerhaftigkeit
This Technical Report was approved by CEN on 22 June 2013. It has been drawn up by the Technical Committee CEN/TC 104.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 16563:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 16563:2013
CEN/TR 16563:2013 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .6
4 Principle .7
5 Selection of test methods .8
6 Determination of the reference value .9
7 Determination of equivalent durability-related test performance . 11
8 Production control . 13
9 Evaluation and declaration of equivalent durability-related test performance . 14
10 Interface with users . 14
Annex A (informative) Finland —Testing of freeze-thaw resistance of a candidate concrete . 16
Annex B (informative) Germany . 19
Annex C (informative) Italy . 28
Annex D (informative) The Netherlands . 29
Annex E (informative) Norway . 31
Annex F (normative) The system used in Portugal and defined in their national annex to EN 206-1 . 32
Annex G (informative) Spain . 34
Annex H (informative) United Kingdom . 36
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.