iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1532:1997

(Main)

Installation and equipment for liquefied natural gas - Ship to shore interface

Installation and equipment for liquefied natural gas - Ship to shore interface

This European Standard specifies what is specified at the terminal and on board the ship to ensure the safe tranfer of LNG at receiving and exporting terminals.It is applicable to the ship/shore LNG transfer system including: - ship to shore connections;ety of transfer operations; - all safety aspects of transfer operations; - any other operations that occur while the ship is moored on the jetty.

Anlagen und Ausrüstung für Flüssigerdgas - Schnittstelle zwischen Schiff und Land

Gegenstand dieser Norm sind die einzuhaltenden Anforderungen am Terminal und an Bord des Schiffes, um das sichere Laden und Löschen von LNG zu bewährleisten. Diese Europäische Norm gilt für alle Lade- und Löschvorgänge zwischen Schiffund Land. Sie gilt für alle Lade- und Löscheinrichtungen und Maßnahmen im Zusammenhang mit dem Laden und Löschen, wie insbesondere: - physische Verbindungen zwischen Schiff und Land; - alle sicherheitstechnischen Fragen im Zusammenhang mit dem Laden und Löschen; - alle sonstigen Vorgänge, während das Schiff an der Brücke liegt.

Installations et équipements relatifs au gaz naturel liquéfié - Interface terre navire

Cette norme européenne traite des exigences applicables au terminal et à bord dunavire pour garantir le transfert sûr de GNL. Elle définit aussi les connexionsterminal/navire liées au transfert de GNL. Cette norme européenne traite des opérations de transfert de GNL du navire vers le terminal et vice versa. Elle e est applicable aux systèmes de transfert entre les navires et le terminal comprenant: - les connexions physiques entre le navire et le terminal; - tous les aspects liés à la sécurité des opérations de transfert; - toutes les autres opérations qui se déroulent alors que le navire est amarré à la jetée.

Napeljave in oprema za utekočinjeni zemeljski plin – Povezava med ladjo in kopnim

General Information

Status
Withdrawn
Publication Date
18-Mar-1997
Withdrawal Date
14-Dec-2010
ICS
75.200 - Petroleum products and natural gas handling equipment
Technical Committee
CEN/TC 282 - Installation and equipment for LNG
Drafting Committee
CEN/TC 282 - Installation and equipment for LNG
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Dec-2010
Completion Date
15-Dec-2010
Ref Project
SIST EN 1532:1999 - Installation and equipment for liquefied natural gas - Ship to shore interface

Relations

Replaced By
EN ISO 28460:2010 - Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010)
Effective Date
18-Dec-2010

Buy Standard

EN 1532:1999EN 1532:1999
PreviousNext
Standard
EN 1532:1999
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NRSQLPAnlagen und Ausrüstung für Flüssigerdgas - Schnittstelle zwischen Schiff und LandInstallations et équipements relatifs au gaz naturel liquéfié - Interface terre navireInstallation and equipment for liquefied natural gas - Ship to shore interface75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN 1532:1997SIST EN 1532:1999en01-julij-1999SIST EN 1532:1999SLOVENSKI
STANDARD
SIST EN 15
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 5124:2024(Main)
Loading and unloading of liquefied natural gas (LNG) tank wagons and containers (ISO 5124:2024)
kSIST FprEN ISO 5124:2024

This document provides requirements and recommendations for the design, construction and operation of newly installed liquefied natural gas (LNG) railway loading and unloading facilities for use on onshore LNG terminals, LNG satellite plants, handling LNG tank wagons or tank containers engaged in international trade.
The designated boundary limits of this document are between the LNG terminal’s inlet/outlet piping headers at the beginning of the rail loading or unloading area and the rail track area used for LNG tank wagons and containers. It is applicable to all rail loading bays, weighbridge(s) and related subsystems.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1474-2:2020/AC:2023(Corrigendum)
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
SIST EN 1474-2:2020/AC:2023

This European Standard gives general guidelines for the design, material selection, qualification, certification, and testing details for Liquefied Natural Gas (LNG) transfer hoses for offshore transfer or on coastal weather-exposed facilities for aerial, floating and submerged configurations or a combination of these. Whilst this European Standard is applicable to all LNG hoses, it is acknowledged that there may be further specific requirements for floating and submerged hoses.
The transfer hoses will be designed to be part of transfer systems (it means that they will be fitted with ERS, QCDC, handling systems, hydraulic and electric components etc.) To avoid unnecessary repetition, cross-references to EN 1474-1 and EN 1474-3, are made for all compatible items, and for references, definitions and abbreviations. Where additional references, definitions and abbreviations are required specifically for LNG hoses, they are listed in this European Standard.
Transfer hoses need to be durable when operating in the marine environment and to be flexible with a minimum bending radius compatible with handling and the operating requirements of the transfer system.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20257-2:2021(Main)
Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 2: Specific FSRU issues (ISO 20257-2:2021)
SIST EN ISO 20257-2:2021

This document provides specific requirements and guidance for the design and operation of floating LNG storage and regasification units (FSRU) described in ISO 20257-1.
This document is applicable to offshore, near-shore or docked FSRUs and to both new-built and converted FSRUs.
This document includes requirements to the jetty when an FSRU is moored to a jetty.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1473:2021(Main)
Installation and equipment for liquefied natural gas - Design of onshore installations
SIST EN 1473:2021

This document gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG and natural gas (NG).
This document is applicable for plants with an LNG storage capacity above 200 t.
The designated boundary limits are LNG inlet/outlet by the ship’s manifold including vapour return connection, the truck loading/unloading connection including vapour return, the rail car loading/unloading connection including vapour return and the natural gas in and outlet boundary by piping systems.
Terminals or plant types have one or more boundary limits as described in this scope (see Figure 1).
A short description of each of these installations is given in Annex G.
Feed gas for LNG liquefaction installations (plant) can be from gas field, associated gas from oil field, piped gas from transportation grid or from renewables.
Floating solutions (for example FPSO, FSRU, SRV), whether off-shore or near-shore, are not covered by this document even if some concepts, principles or recommendations could be applied. However, in case of berthed FSRU with LNG transfer across the jetty, the following recommendations apply for the jetty and topside facilities.
In case of solutions using floating storage unit (FSU) and land-based re-gasification solution, the on-shore part is covered by these standard recommendations.
Plants with a storage inventory from 5 t up to 200 t are covered by [5].

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1474-2:2020(Main)
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
SIST EN 1474-2:2020

This European Standard gives general guidelines for the design, material selection, qualification, certification, and testing details for Liquefied Natural Gas (LNG) transfer hoses for offshore transfer or on coastal weather-exposed facilities for aerial, floating and submerged configurations or a combination of these. Whilst this European Standard is applicable to all LNG hoses, it is acknowledged that there may be further specific requirements for floating and submerged hoses.
The transfer hoses will be designed to be part of transfer systems (it means that they will be fitted with ERS, QCDC, handling systems, hydraulic and electric components etc.) To avoid unnecessary repetition, cross-references to EN 1474-1 and EN 1474-3, are made for all compatible items, and for references, definitions and abbreviations. Where additional references, definitions and abbreviations are required specifically for LNG hoses, they are listed in this European Standard.
Transfer hoses need to be durable when operating in the marine environment and to be flexible with a minimum bending radius compatible with handling and the operating requirements of the transfer system.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20257-1:2020(Main)
Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 1: General requirements (ISO 20257-1:2020, Corrected version 2020-10)
SIST EN ISO 20257-1:2020

This document provides requirements and guidance for the design and operation of floating liquefied natural gas (LNG) installations, including installations for the liquefaction, storage, vaporisation, transfer and handling of LNG, in order to have a safe and environmentally acceptable design and operation of floating LNG installations.
This document is applicable to:
—     floating LNG liquefaction installations (plant) — FLNG;
—     floating LNG regasification installations (plant) — FSRU;
—     floating storage units — FSU.
This document is applicable to offshore, near-shore or docked floating LNG installations.
This document includes any jetty in the scope in case of docked floating LNG installations with regards to the mooring. This document briefly describes floating LNG mooring concepts.
This document is applicable to both newbuilt and converted floating LNG installations, and addresses specific requirements.
This document is not applicable to:
—     onshore LNG storage, liquefaction and/or regasification installations/plants, except for docked FSRU and/or FLNG installations;
—     offshore LNG plants based on non-floating structure (such as gravity based structure [GBS] principle); and
—     support onshore based facilities (such as support vessels, tugs, etc.).
This document is not intended for design floating power generation facilities though relevant parts of this document can be used.
This document is not intended to cover LNG as fuel bunkering applications.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20088-2:2020(Main)
Determination of the resistance to cryogenic spill of insulation materials - Part 2: Vapour exposure (ISO 20088-2:2020)
SIST EN ISO 20088-2:2020

This document describes a method for determining the resistance of Cryogenic Spill Protection (CSP) systems to vapour generated from a cryogenic liquid release where the liquid content is practically zero. It is applicable where CSP systems are installed on carbon steel.
The test provided in this document is not applicable to high pressure cryogenic liquid releases that can be found in refrigeration circuits and in LNG streams immediately post-liquefaction.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20088-3:2019(Main)
Determination of the resistance to cryogenic spillage of insulation materials - Part 3: Jet release (ISO 20088-3:2018)
SIST EN ISO 20088-3:2020

This document describes a method for determining the resistance of a cryogenic spill protection (CSP) system to a cryogenic jet as a result of a pressurized release which does not result in immersion conditions. It is applicable where CSP systems are installed on carbon steel and will be in contact with cryogenic fluids.
A cryogenic jet can be formed upon release from process equipment operating at pressure (e.g. some liquefaction processes utilize 40 to 60 bar operating pressure). Due to high pressure discharge, the cryogenic spillage protection can be compromised by the large momentum combined with extreme cryogenic temperature.
Although the test uses liquid nitrogen as the cryogenic liquid, the test described in this document is representative of a release of LNG, through a 20 mm orifice or less, at a release pressure of 6 barg or less, based upon simulated parameters 1 m from the release point. Confidence in this test being representative is based upon a comparison of the expected dynamic pressure of the simulated release in comparison with dynamic pressure from releases in accordance with this document.
It is not practical in this test to cover the whole range of cryogenic process conditions found in real plant conditions; in particular the test does not cover high pressure cryogenic jet releases that might be found in refrigeration circuits and in LNG streams immediately post-liquefaction.
Liquid nitrogen is used as the cryogenic medium due to the ability to safely handle the material at the pressures described in this document. The test condition is run at nominally 8 barg pressure.
ISO 20088-1 covers cryogenic release scenarios which can lead to pooling conditions for steel work protected by cryogenic spill protection as a result of a jet release or low pressure release of LNG or liquid nitrogen. ISO 20088-2 covers vapour phase exposure conditions as a result of a jet release or low pressure release of LNG or liquid nitrogen.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20088-1:2016(Main)
Determination of the resistance to cryogenic spillage of insulation materials - Part 1: Liquid phases (ISO 20088-1:2016)
SIST EN ISO 20088-1:2017

ISO 20088-1:2016 describes a method for determining the resistance to liquid cryogenic spillage on cryogenic spillage protection (CSP) systems. It is applicable where CSP systems are installed on carbon steel and will be in contact with cryogenic fluids.
Liquid nitrogen is used as the cryogenic medium since it has a lower boiling point than liquid natural gas or liquid oxygen and it is not flammable. Additionally, it can be safely used for experiment.
Future parts of the standard will cover vapour phase and jet exposure conditions.
The test laboratory is responsible to conduct an appropriate risk assessment according to local regulation in order to consider the impact of liquid and gaseous nitrogen exposure to equipment and personnel.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16904:2016(Main)
Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
SIST EN ISO 16904:2016

ISO 16904:2016 specifies the design, minimum safety requirements and inspection and testing procedures for liquefied natural gas (LNG) marine transfer arms intended for use on conventional onshore LNG terminals, handling LNG carriers engaged in international trade. It can provide guidance for offshore and coastal operations. It also covers the minimum requirements for safe LNG transfer between ship and shore.
Although the requirements for power/control systems are covered, this International Standard does not include all the details for the design and fabrication of standard parts and fittings associated with transfer arms.
ISO 16904:2016 is supplementary to local or national standards and regulations and is additional to the requirements of ISO 28460.
ISO 16904:2016 needs not be applied to existing facilities.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day