FprEN 17744

Agricultural and forestry machinery - Environmental requirements for dusters

This document specifies general requirements and their test methods for dusters for applying formulated products in the form of dust with regard to minimizing the potential risk of environmental contamination during use.
Hand operated portable dusters (knapsack) are not included in this document.
This document deals with all the significant environmental hazards related to the duster.
This document is not applicable to dusters manufactured before the date of its publication.

Land- und forstwirtschaftliche Maschinen - Umweltanforderungen für Stäubegeräte

Dieses Dokument legt allgemeine Anforderungen und deren Prüfverfahren für Stäubegeräte zur Ausbringung von formulierten Produkten in Form von Staub fest, um das potenzielle Risiko einer Umweltverschmutzung während der Anwendung zu minimieren.
Handbetriebene tragbare Stäubegeräte werden in diesem Dokument nicht behandelt.
Diese Dokumentation behandelt alle signifikanten Umweltgefährdungen im Zusammenhang mit dem Stäubegerät.
Dieses Dokument gilt nicht für Stäubegeräte, die vor dem Veröffentlichungsdatum dieses Dokuments hergestellt wurden.

Matériel agricole et forestier - Exigences environnementales relatives aux poudreuses

Le présent document spécifie des exigences générales ainsi que des méthodes d’essai relatives aux poudreuses pour l’application de produits formulés sous forme de poudre, afin de réduire au maximum le risque potentiel de contamination environnementale existant lors de l’emploi de ces systèmes.
Les poudreuses manuelles portatives (à dos) ne sont pas couvertes par le présent document.
Le présent document aborde tous les dangers environnementaux significatifs présentés par les poudreuses.
Ce document ne s’applique pas aux poudreuses fabriquées avant sa date de publication.

Kmetijski in gozdarski stroji - Okoljevarstvene zahteve za prašilnike

General Information

• Status: Not Published
• Publication Date: 09-May-2024
• ICS: 65.060.40 - Plant care equipment
• Technical Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Drafting Committee: CEN/TC 144/WG 3 - Mobile machines and trailers
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 10-Nov-2023
• Due Date: 02-Apr-2023
• Completion Date: 10-Nov-2023
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/471 - Mandate addressed to CEN for standardisation in the field of machinery for pesticide application
• Ref Project: oSIST prEN 17744:2022 - Agricultural and forestry machinery - Environmental requirements for dusters

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17744:2022
01-november-2022
Kmetijski in gozdarski stroji - Okoljevarstvene zahteve za prašilnike
Agricultural and forestry machinery - Environmental requirements for dusters
Land- und forstwirtschaftliche Maschinen - Umweltanforderungen an Stäubegeräte
Matériel agricole et forestier - Exigences environnementales relatives aux poudreuses
Ta slovenski standard je istoveten z: prEN 17744
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
oSIST prEN 17744:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17744:2022

---------------------- Page: 2 ----------------------
oSIST prEN 17744:2022


DRAFT
EUROPEAN STANDARD
prEN 17744
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2022
ICS 65.060.40
English Version

Agricultural and forestry machinery - Environmental
requirements for dusters
Matériel agricole et forestier - Exigences Land- und forstwirtschaftliche Maschinen -
environnementales relatives aux poudreuses Umweltanforderungen an Stäubegeräte
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 144.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17744:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17744:2022
prEN 17744:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
4.1 General. 5
4.2 Hopper(s) . 6
4.3 Fan . 7
4.4 Electrostatic discharge device . 7
4.5 Measuring systems, controls and regulation systems . 7
4.6 Outlets .
...