EN 10217-1:2002

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

This Part of EN 10217 specifies the technical delivery conditions for two qualities TR1 and TR2 of welded tubes of circular cross section, made of non-alloy quality steel and with specified room temperature properties.

Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei Raumtemperatur

Dieser Teil der EN 10217 enthält die technischen Lieferbedingungen für zwei Güten, TR1 und TR2, geschweißter- Rohre mit kreisförmigem Querschnitt aus unlegiertem Stahl mit festgelegten Eigenschaften bei Raumtemperatur.

Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 1: Tubes en acier non allié avec caractéristiques spécifiées à température ambiante

La présente partie de la norme européenne spécifie les conditions techniques de livraison pour deux qualités, TR1 et TR2, de tubes sans soudure à section circulaire, fabriqués en acier non allié de qualité, avec caractéristiques spécifiées à température ambiante. D'autes parties de cette norme européenne sont en préparation.

Varjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 1. del: Nelegirane jeklene cevi s specificiranimi lastnostmi za delo pri sobni temperaturi

General Information

• Status: Withdrawn
• Publication Date: 21-May-2002
• Withdrawal Date: 16-Apr-2019
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 1 - Tubes for pressure purposes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Apr-2019
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10217-1:2003 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

Relations

• Replaced By: EN 10217-1:2019 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
• Effective Date: 24-Apr-2019
• Amended By: EN 10217-1:2002/A1:2005 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UDWXULGeschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei RaumtemperaturTubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 1: Tubes en acier non allié avec caractéristiques spécifiées a température ambianteWelded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 10217-1:2002SIST EN 10217-1:2003en01-april-2003SIST EN 10217-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10217-1May 2002ICS 23.040.10English versionWelded steel tubes for pressure purposes - Technical deliveryconditions - Part 1: Non-alloy steel tubes with specified roomtemperature propertiesTubes soudés en acier pour service sous pression -Conditions techniques de livraison - Partie 1: Tubes enacier non allié avec caractéristiques spécifiées àtempérature ambianteGeschweißte Stahlrohre für Druckbeanspruchungen -Technische Lieferbedingungen - Teil 1: Rohre ausunlegierten Stählen mit festgelegten Eigenschaften beiRaumtemperaturThis European Standard was approved by CEN on 25 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10217-1:2002 ESIST EN 10217-1:2003

inspection and testing.2010SAMPLING.2210.1Frequency of tests.2210.2Preparation of samples and test pieces.2311TEST METHODS.2511.1Chemical analysis.2511.2Tensile test on base material.2511.3Transverse tensile test on the weld.2511.4Flattening test.2511.5Drift expanding test.2611.6Weld bend test.2611.7Impact test.2611.8Leak tightness test.2711.9Dimensional inspection.2811.10Visual examination.2811.11Non-Destructive Testing.2811.12Retest, sorting and reprocessing.2812MARKING.2812.1Marking to be applied.2812.2Additional marking.2913PROTECTION.29Annex A (normative).30Annex ZA (informative).39Bibliography.40SIST EN 10217-1:2003

European Standard series covering tubes for pressure purposes is:EN 10216:Seamless
steel tubes for pressure purposes.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 10217-1:2003

of steel tubes Part 1 : Automatic electromagnetic testing of seamlessand welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightnessEN 10246-3, Non-Destructive Testing
of steel tubes - Part 3 :Automatic eddy current testing of seamlessand welded (except submerged arc-welded) steel tubes for the detection of imperfectionsEN 10246-5, Non-Destructive Testing
of steel tubes – Part 5: Automatic full peripheral magnetictransducer/flux leakage testing of seamless and welded (except submerged
...