Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods

This part 1 describes methods for the quantitative determination of residual solvents in flexible packaging by static headspace chromatography. The chemical identities of the residual solvents to be determined by this must be known before commencing the analysis. During the analysis there may be interferences from possible products of thermal decomposition. Residues from thermal decomposition products are not within the scope of this standard. Additional peaks due to these products shall not be considered for evaluation of residual solvents.

Verpackung - Flexible Packstoffe - Bestimmung der Restlösemittel durch statische Dampfraumanalyse mittels Gaschromatographie - Teil 1: Absolute Verfahren

Dieser Teil 1 beschreibt Methoden zur quantitativen Bestimmung von Restlöse- mitteln in flexiblen Verpackungen durch statische Dampfraumanalyse mittels Gaschromatographie. Die chemische Identität der Restlösemittel, die mit dieser Methode bestimmt werden sollen, muß bekannt sein, bevor die Analyse durchgeführt wird. Während der Analyse können im Chromatogramm Überlagerungen durch thermische Abbauprodukte auftreten, deren Bestimmung nichtim Anwendungßweck dieser Norm liegt.

Emballage - Matériaux d'emballages souples - Détermination des solvants résiduels par chromatographie en phase gazeuse et espace de tête statique - Partie 1: Méthodes absolues

La présente partie de la présente Norme Européenne spécifie des méthodes de détermination quantitative des solvants résiduels présents dans les emballages souples, par chromatographie en phase gazeuse et espace de tête statique, l'identité chimique des solvants résiduels à déterminer étant connue avant le début de l'analyse. Les résidus issus des produits de décomposition thermique n'entrent pas dans le domaine d'application de la présente norme.
La méthode s'applique aux matériaux d'emballages souples pouvant être constitués de films plastiques mono- ou multicouches, de papier ou de carton, de feuilles d'aluminium ou d'une combinaison de ces matériaux.
La présente méthode ne s'applique pas aux solvants résiduels dont les quantités sont inférieures à 0,5 mg/m2.

Embalaža – Prožni embalažni materiali – Določevanje ostanka topil s statičnim vzorčevalnikom iz plinske faze (headspace) za plinsko kromatografijo – 1. del: Absolutna metoda

General Information

Status
Published
Publication Date
15-Oct-2002
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2023
Completion Date
02-Dec-2023

Buy Standard

Standard
EN 13628-1:2003
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Flexible Packstoffe - Bestimmung der Restlösemittel durch statische Dampfraumanalyse mittels Gaschromatographie - Teil 1: Absolute VerfahrenEmballage - Matériaux d'emballages souples - Détermination des solvants résiduels par chromatographie en phase gazeuse et espace de tete statique - Partie 1: Méthodes absoluesPackaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods55.040SDNLUDQMHPackaging materials and accessoriesICS:Ta slovenski standard je istoveten z:EN 13628-1:2002SIST EN 13628-1:2003en01-julij-2003SIST EN 13628-1:2003SLOVENSKI
STANDARD



SIST EN 13628-1:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13628-1October 2002ICS 55.040English versionPackaging - Flexible packaging material - Determination ofresidual solvents by static headspace gas chromatography -Part 1: Absolute methodsEmballage - Matériaux d'emballages souples -Détermination des solvants résiduels par chromatographieen phase gazeuse et espace de tête statique - Partie 1:Méthodes absoluesVerpackung - Flexible Packstoffe - Bestimmung derRestlösemittel durch statische Dampfraumanalyse mittelsGaschromatographie - Teil 1: Absolute VerfahrenThis European Standard was approved by CEN on 26 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13628-1:2002 ESIST EN 13628-1:2003



EN 13628-1:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Reagents.45Apparatus.56Sampling.87Test specimens.88Incubation of the test specimens.89Procedure.910Precision data.1611Test report.16SIST EN 13628-1:2003



EN 13628-1:2002 (E)3ForewordThis document EN 13628-1:2002 has been prepared by Technical Committee CEN/TC 261 "Packaging", thesecretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 200
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.