EN ISO 17657-5:2007

Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding current measuring system (ISO 17657-5:2005)

ISO 17657-5:2005 specifies a verification procedure for welding current meters and monitoring devices with current sensing coil, which are applied in measuring welding current in resistance welding using alternating current of 50 Hz or 60 Hz, or with direct current.

Widerstandsschweißen - Schweißstrommessung für das Widerstandsschweißen - Teil 5: Verifizierung des Schweißstrommesssystems (ISO 17657-5:2005)

Soudage par résistance - Mesurage des courants en soudage par résistance - Partie 5: Vérification des systèmes de mesurage du courant de soudage (ISO 17657-5:2005)

L'ISO 17657-5:2005 spécifie un mode opératoire de vérification des mesureurs du courant de soudage et des dispositifs de surveillance avec tore de mesure de courant utilisés pour le mesurage du courant de soudage en soudage par résistance, en courant alternatif à 50 Hz ou à 60 Hz ou en courant continu.
Ce mode opératoire de vérification est applicable pour une étendue de courant comprise entre 0,5 kA et 25 kA.

Uporovno varjenje - Merjenje jakosti varilnega toka pri uporovnem varjenju - 5. del: Preverjanje sistema merjenja jakosti varilnega toka (ISO 17657-5:2005)

General Information

• Status: Published
• Publication Date: 19-Jun-2007
• Withdrawal Date: 30-Dec-2007
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Jun-2007
• Due Date: 26-May-2008
• Completion Date: 20-Jun-2007
• Ref Project: SIST EN ISO 17657-5:2007 - Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding current measuring system (ISO 17657-5:2005)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17657-5:2007
01-september-2007
Uporovno varjenje - Merjenje jakosti varilnega toka pri uporovnem varjenju - 5. del:
Preverjanje sistema merjenja jakosti varilnega toka (ISO 17657-5:2005)
Resistance welding - Welding current measurement for resistance welding - Part 5:
Verification of welding current measuring system (ISO 17657-5:2005)
Widerstandsschweißen - Schweißstrommessung für das Widerstandsschweißen - Teil 5:
Verifizierung des Schweißstrommesssystems (ISO 17657-5:2005)
Soudage par résistance - Mesurage des courants en soudage par résistance - Partie 5:
Vérification des systemes de mesurage du courant de soudage (ISO 17657-5:2005)
Ta slovenski standard je istoveten z: EN ISO 17657-5:2007
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 17657-5:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 17657-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2007
ICS 25.160.10

English Version
Resistance welding - Welding current measurement for
resistance welding - Part 5: Verification of welding current
measuring system (ISO 17657-5:2005)
Soudage par résistance - Mesurage des courants en Widerstandsschweißen - Schweißstrommessung für das
soudage par résistance - Partie 5: Vérification des Widerstandsschweißen - Teil 5: Verifizierung des
systèmes de mesurage du courant de soudage (ISO Schweißstrommesssystems (ISO 17657-5:2005)
17657-5:2005)
This European Standard was approved by CEN on 19 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17657-5:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 17657-5:2007 (E)
Foreword
The text of ISO 17657-5:2005 has been prepared by Technical Committee ISO/TC 44 "Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
17657-5:2007 by Technical Committee CEN/TC 121 "Welding", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn
at the latest by December 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 17657-5:2005 has been approved by CEN as a EN ISO 17657-5:2007 without any
modification.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 17657-5
First edition
2005-09-15

Resistance welding — Welding current
measurement for resistance welding —
Part 5:
Verification of welding current measuring
system
Soudage par résistance — Mesurage des courants en soudage par
résistance —
Partie 5: Vérification des systèmes de mesurage du courant de
soudage





Reference number
ISO 17657-5:2005(E)
© ISO 2005

---------------------- Page: 4 ----------------------

ISO 17657-5:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
d
...