EN ISO 17834:2003

Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003)

ISO 17834:2003 is applicable to sprayed metal coatings for protection against corrosion at temperatures up to 1 000 °C (1 273 K).
For the protection of iron and steel by sprayed aluminium and zinc coatings against atmospheric corrosion reference should be made to ISO 2063.

Thermisches Spritzen - Beschichtungen zum Schutz gegen Korrosion und Oxidation bei erhöhten Temperaturen (ISO 17834: 2003)

Diese Norm gilt für Metallspritzschichten zum Schutz gegen Korrosion bis Temperaturen von 1 000°C (1273 K).
Für den Schutz von Eisen und Stahl durch Spritzschichten aus Aluminium und Zink gegen atmosphärische Korrosion sollte auf prEN ISO 2063 Bezug genommen werden.
Nichtmetallische Beschichtungswerkstoffe, die auch durch Spritzen aufgetragen werden können, sind nicht Gegenstand dieser Norm.

Projection thermique - Revêtements de protection contre la corrosion et l'oxydation à haute température (ISO 17834:2003)

L'ISO 17834:2003 s'applique aux revêtements métalliques de protection contre la corrosion, projetés à des températures atteignant jusqu'à 1 000 °C (1 273 K).
En ce qui concerne la protection du fer et de l'acier contre la corrosion atmosphérique au moyen de couches projetées d'aluminium et de zinc, il convient de se référer à l'ISO 2063.

Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003)

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• Withdrawal Date: 29-Jun-2004
• ICS: 25.220.20 - Surface treatment
• Technical Committee: CEN/TC 240 - Thermal spraying and thermally spraying coatings
• Drafting Committee: CEN/TC 240 - Thermal spraying and thermally spraying coatings
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 10-Sep-2008
• Completion Date: 10-Sep-2008
• Ref Project: SIST EN ISO 17834:2004 - Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003)

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2004
Thermal spraying - Coatings for protection against corrosion and oxidation at
elevated temperatures (ISO 17834:2003)
Thermal spraying - Coatings for protection against corrosion and oxidation at elevated
temperatures (ISO 17834:2003)
Thermisches Spritzen - Beschichtungen zum Schutz gegen Korrosion und Oxidation bei
erhöhten Temperaturen (ISO 17834: 2003)
Projection thermique - Revetements de protection contre la corrosion et l'oxydation a
haute température (ISO 17834:2003)
Ta slovenski standard je istoveten z: EN ISO 17834:2003
ICS:
25.220.20 Površinska obdelava Surface treatment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 17834
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 25.220.20
English version
Thermal spraying - Coatings for protection against corrosion and
oxidation at elevated temperatures (ISO 17834:2003)
Projection thermique - Revêtements de protection contre la Thermisches Spritzen - Beschichtungen zum Schutz gegen
corrosion et l'oxydation à haute température (ISO Korrosion und Oxidation bei erhöhten Temperaturen (ISO
17834:2003) 17834: 2003)
This European Standard was approved by CEN on 7 August 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17834:2003 E
worldwide for CEN national Members.

Contents
Foreword.3
1 Scope .3
2 Normative references .3
3 Coating material and processes.4
4 Application of coating .5
5 Required characteristics.6
5.1 Coating thickness .6
5.2 Service temperature, environment and subsequent treatment .6
6 Re-treatment of defective areas .6
Annex A (informative) Design recommendations for objects to be metal sprayed.7
Annex B (normative) Coating materials.8
Foreword
This document EN ISO 17834:2003 has been prepared by Technical Committee CEN/TC 240 “Thermal spraying
and thermally sprayed coatings”, the secretariat of which is held by DIN, in collaboration with Technical Committee
ISO/TC 107 “Metallic and other inorganic coatings”.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest by
June 2004.
Annex A is informative. Annex B is normative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
1 Scope
This standard is applicable to sprayed metal coatings for protection against corrosion at temperatures up to 1000°C
(1273 K).
For the protection of iron and steel by sprayed aluminium and zinc coatings against atmospheric corrosion
reference should be made to prEN ISO 2063.
Coating materials other than metals, although they may be applied by spraying, are outside the scope of this
standard.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 1274, Thermal spraying — Powders — Composition — Technical supply conditions.
EN 13507, Thermal spraying — Pre-treatment of surfaces of metallic parts and components for thermal spraying.
prEN ISO 2063, Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys
(ISO/DIS 2063:2002).
EN ISO 14919, Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification —
Technical supply conditions (ISO 14919:2001).
ISO 14232, Thermal spraying — Powders — Composition and technical supply conditions.
3 Coating material and processes
When selecting coating materials and processes, consideration shall be given to the different working temperatures
and operating environments that may be found.
For example in any temperature range a coating may be required to res
...