iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 15128:2005

(Main)

Survey of European Standards for rehabilitation of drain and sewer systems

Survey of European Standards for rehabilitation of drain and sewer systems

This document gives a survey of European Standards available in the field of rehabilitation of drain and sewer systems.

Übersicht über Europäische Normen für die Sanierung von Entwässerungssystemen

Dieses Dokument enthält eine Übersicht über Europäische Normen, die gegenwärtig auf dem Gebiet der Sanierung von Abwasserkanälen und -leitungen verfügbar sind.

Aperçu des Normes européennes pour la réhabilitation des réseaux d'évacuation et d'assainissement

Le présent document donne un aperçu des Normes européennes disponibles dans le domaine de la
réhabilitation des réseaux d'évacuation et d'assainissement.

Pregled evropskih standardov za obnovo sistemov za odvod odpadne vode in za kanalizacijo

General Information

Status
Withdrawn
Publication Date
21-Jun-2005
Withdrawal Date
01-Feb-2016
ICS
93.030 - External sewage systems
Technical Committee
CEN/TC 165 - Waste water engineering
Drafting Committee
CEN/TC 165/WG 1 - General requirements for pipes
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
02-Feb-2016
Ref Project
SIST-TP CEN/TR 15128:2005 - Survey of European Standards for rehabilitation of drain and sewer systems

Buy Standard

TP CEN/TR 15128:2005TP CEN/TR 15128:2005
PreviousNext
Technical report
TP CEN/TR 15128:2005
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 15128:2005
01-september-2005
Pregled evropskih standardov za obnovo sistemov za odvod odpadne vode in za
kanalizacijo
Survey of European Standards for rehabilitation of drain and sewer systems
Übersicht über Europäische Normen für die Sanierung von Entwässerungssystemen
Aperçu des Normes européennes pour la réhabilitation des réseaux d'évacuation et
d'assainissement
Ta slovenski standard je istoveten z: CEN/TR 15128:2005
ICS:
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST-TP CEN/TR 15128:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 15128:2005

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 15128:2005
TECHNICAL REPORT
CEN/TR 15128
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
June 2005
ICS 93.030
English version
Survey of European Standards for rehabilitation of drain and
sewer systems
Aperçu des Normes européennes pour la réhabilitation des Übersicht über Europäische Normen für die Sanierung von
réseaux d'évacuation et d'assainissement Entwässerungssystemen
This Technical Report was approved by CEN on 24 April 2005. It has been drawn up by the Technical Committee CEN/TC 165.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15128:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 15128:2005
CEN/TR 15128:2005 (E)
Contents Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms and definitions.4
4 Rehabilitation techniques applicable to drain and sewer systems.5
5 European Standards for rehabilitation of drain and sewer systems.7
Bibliography.14

2

---------------------- Page: 4 ----------------------

SIST-TP CEN/TR 15128:2005
CEN/TR 15128:2005 (E)
Foreword
This document (CEN/TR 15128:2005) has been prepared by Technical Committee CEN/TC 165 “Wastewater
engineering”, the secretariat of which is held by DIN.
CEN/TC 165 having determined the current status of European standardization regarding general
requirements for drain and sewer systems and existing standards and draft standards on the subject of
rehabilitation of drain and sewer systems, and CEN/TC 165 having considered the results of an enquiry
submitted by EUREAU on the status of European Standards in the field of rehabilitation of drain and sewer
systems, it was established that those were not sufficiently known.
It was agreed that information of the status of European standard work in this area was greatly needed.
Therefore, CEN/TC 165 decided to make this information in summary form available with the aid of an
informative CEN document in the form of a CEN/TR and, if necessary, to give the necessary explanations.
Standards produced by the following Technical Committees are included in this document:
CEN/TC 155 "Plastics piping systems and ducting systems";
CEN/TC 164 "Water supply";
CEN/TC 165 "Wastewater engineering".
Because European manufacturers have disbanded the production of fibre cement pipes and fittings for drain
and sewer systems, European Standards in that field are not included in this document.


3

---------------------- Page: 5 ----------------------

SIST-TP CEN/TR 15128:2005
CEN/TR 15128:2005 (E)
1 Scope
This document gives a survey of European Standards available in the field of rehabilitation of drain and sewer
systems.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the late
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 11296-9:2022(Main)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
SIST EN ISO 11296-9:2023

This document, in conjunction with ISO 11296‑1, specifies the requirements and test methods for pipes and fittings for the renovation of underground non-pressure drainage and sewerage networks by lining with a single rigid annulus of structural cementitious grout formed behind a plastics inner layer. This plastics layer serves as permanent formwork anchored to the grout.
This document is applicable to plastics inner layers and grout systems with or without steel reinforcement. It does not apply to the structural design of the lining system.
NOTE      Systems with multiple annuli are available, but these are controlled by patent rights and not covered by this document.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12889:2022(Main)
Trenchless construction and testing of drains and sewers
SIST EN 12889:2023

This document is applicable to the trenchless construction, trenchless replacement techniques and testing of new drains and new sewers in the ground and usually operating as gravity or pressure pipelines, formed using prefabricated pipes and their joints.
Renovation techniques for existing pressure and non-pressure systems are not covered by this document.
Methods of trenchless construction include:
- manned and unmanned techniques;
- steerable and non-steerable techniques.
NOTE 1 Mining or tunnelling techniques for permanent structures (e.g. in situ construction or the use of prefabricated segments) are not covered by this document although some parts can apply to these methods.
NOTE 2 Trenchless insertion using a pipe plough system is a common method for installing small pipes and cables. The method does not exactly cope with the scope of this document. Therefore, it is described in the informative Annex D.
Requirements for associated pipeline installation work other than trenchless construction, e.g. for manholes and inspection chambers, are not covered by this document and are specified in EN 1610. This also applies to pipes that are subsequently installed within entry and exit shafts/pits.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 476:2022(Main)
General requirements for components used in drains and sewers
SIST EN 476:2022

This document specifies general requirements to be respected in product standards for components such as pipes, fittings, inspection chambers and manholes with their respective joints intended for use in drains and sewers inside and outside buildings which operate as gravity systems allowing for a maximum pressure of 40 kPa.
It also specifies general requirements for components used in hydraulically and pneumatically pressurized pipes, drains and sewers.
NOTE 1   Where the term “inside buildings” is used in the context of components fixed inside buildings, it also includes pipes and fittings fixed on external surfaces of buildings.
NOTE 2   This document is not a product standard and therefore not intended for the direct evaluation of products.
This document covers components to be used in conveying in a satisfactory manner:
—   domestic wastewater;
—   rainwater and surface water;
—   other wastewater acceptable for discharge into the system.
This document is applicable to components of circular and other cross sections.
This document is equally applicable to components which are factory-made and to those constructed on site, where applicable.
NOTE 3   This document does not apply to components used for trenchless construction according to EN 14457 and for components used for renovation of drains and sewers according to EN 13380.
This document does not supersede the functional requirements of a complete system as defined in EN 752.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16933-1:2022(Main)
Drain and sewer systems outside buildings - Design - Part 1: Layout principles
SIST EN 16933-1:2022

This document specifies requirements for the design of drain and sewer systems outside buildings.
It is applicable to drain and sewer systems from the point where the wastewater leaves a building, roof drainage system, or paved area, to a point where it is discharged into a wastewater treatment plant or receiving water body.
This document specifies requirements for the layout of drain and sewer systems.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14654-2:2021(Main)
Drain and sewer systems outside buildings - Management and control of activities - Part 2: Rehabilitation
SIST EN 14654-2:2021

This document establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document covers the management and control of rehabilitation activities.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a wastewater treatment plant or receiving water body.
Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14654-3:2021(Main)
Drain and sewer systems outside buildings - Management and control of activities - Part 3: Drain and sewer cleaning
SIST EN 14654-3:2021

This document establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document covers the management and control of drain and sewer cleaning.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a wastewater treatment plant or receiving water body.
Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14654-1:2021(Main)
Drain and sewer systems outside buildings - Management and control of activities - Part 1: General requirements
SIST EN 14654-1:2021

This document establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document covers general requirements for the management and control of activities.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a wastewater treatment plant or receiving water body.
Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14654-4:2021(Main)
Drain and sewer systems outside buildings - Management and control of activities - Part 4: Control of inputs from users
SIST EN 14654-4:2021

This document establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document together with EN 14654-1:2021 covers the control of inputs from users.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a wastewater treatment plant or receiving water body.
Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15885:2018(Main)
Classification and characteristics of techniques for renovation, repair and replacement of drains and sewers
SIST EN 15885:2019

This European Standard specifies a system for the classification of trenchless techniques for renovation, repair and replacement on the same line of drains and sewers outside buildings, operated under gravity or pressure, including pipes, connections and manholes. It defines and describes families of techniques and their different generic methods and materials used.
This European Standard does not apply for replacement by open trenching according to EN 1610 and trenchless construction and testing of drains and sewers as new construction off-the-line of the existing drain or sewer according to EN 12889.
This European Standard does not apply for the specification of requirements for specific products.
For each technique family it lists relevant existing standards, materials and applications and outlines characteristics including installation aspects, structural and hydraulic capabilities and site impact.
This standard does not apply to any work required on the existing pipe prior to renovation, repair or replacement.
This European Standard provides information needed to determine viable options and for identification of the optimal technique with regard to a given set of renovation, repair or replacement objectives.
NOTE It is the responsibility of the designer to choose and design the renovation, replacement and repair systems.
It does not specify the calculation methods to determine, for each viable technique, the required amount of material needed to secure the desired performance of the pipeline to be rehabilitated.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16932-3:2018(Main)
Drain and sewer systems outside buildings - Pumping systems - Part 3: Vacuum systems
SIST EN 16932-3:2018

This European Standard specifies requirements for design, construction and acceptance testing of wastewater pumping systems in drain and sewer systems outside the buildings they are intended to serve. It includes pumping systems in drain and sewer systems that operate essentially under gravity as well as systems using either positive pressure or partial vacuum.
This document is applicable to vacuum drain and sewer systems.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day