EN ISO 15614-14:2013

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013)

ISO 15614-14:2013 specifies how a preliminary welding procedure specification is qualified by welding procedure tests.
ISO 15614-14:2013 defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed.

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 14: Laserstrahl-Lichtbogen-Hybridschweißen von Stählen, Nickel und dessen Legierungen (ISO 15614-14:2013)

Dieser Teil von ISO 15614 legt fest, wie eine vorläufige Schweißanweisung durch Schweißverfahrens-prüfungen qualifiziert wird.
Dieser Teil von ISO 15614 definiert die Bedingungen für die Durchführung der Schweißverfahrensprüfungen und den Geltungsbereich für Schweißverfahren für alle praktischen schweißtechnischen Tätigkeiten innerhalb des Bereichs der Einflussgrößen in Abschnitt 8.
ANMERKUNG 1 Es ist möglich, dass zusätzliche Prüfungen durch Anwendungsnormen gefordert werden.
ANMERKUNG 2 Die verschiedenen Teile von ISO 15614 umfassen ihrerseits eine Normenreihe von internationalen Schweißnormen; Einzelheiten sind in ISO 15607:2003, Anhang A, angegeben.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 14: Soudage hybride laser-arc des aciers, du nickel et des alliages de nickel (ISO 15614-14:2013)

L'ISO 15614-14:2013 spécifie comment un descriptif de mode opératoire de soudage préliminaire est qualifié par une épreuve.
L'ISO 15614-14:2013 définit les conditions d'exécution des épreuves de qualification de mode opératoire de soudage et le domaine de validité du mode opératoire de soudage, pour toutes les opérations pratiques de soudage englobant la liste des variables mentionnées.

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 14. del: Hibridno lasersko-obločno varjenje jekel, niklja in nikljevih zlitin (ISO 15614-14:2013)

Ta del ISO 15614 določa, kako se predhodna specifikacija varilnega postopka razvrsti s preskusi varilnih postopkov. Ta del ISO 15614 določa pogoje za izvajanje preskusov varilnih postopkov in razpon razvrščanja za varilne postopke za vse praktične varilne operacije v okviru spremenljivk iz točke 8.

General Information

• Status: Published
• Publication Date: 18-Jun-2013
• Withdrawal Date: 30-Dec-2013
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Jun-2013
• Completion Date: 19-Jun-2013
• Ref Project: SIST EN ISO 15614-14:2013 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2013
3RSLVLQNYDOLILNDFLMDYDULOQLKSRVWRSNRY]DNRYLQVNHPDWHULDOH3UHVNXVYDULOQHJD
SRVWRSNDGHO+LEULGQRODVHUVNRREORþQRYDUMHQMHMHNHOQLNOMDLQQLNOMHYLK]OLWLQ
,62
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO
15614-14:2013)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 14: Laserstrahl-Lichtbogen-Hybridschweißen von
Stählen, Nickel und dessen Legierungen (ISO 15614-14:2013)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 14:
Soudage hybride laser-arc des aciers, du nickel et des alliages du nickel (ISO 15614-
14:2013)
Ta slovenski standard je istoveten z: EN ISO 15614-14:2013
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15614-14
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2013
ICS 25.160.10
English Version
Specification and qualification of welding procedures for metallic
materials - Welding procedure test - Part 14: Laser-arc hybrid
welding of steels, nickel and nickel alloys (ISO 15614-14:2013)
Descriptif et qualification d'un mode opératoire de soudage Anforderung und Qualifizierung von Schweißverfahren für
pour les matériaux métalliques - Épreuve de qualification metallische Werkstoffe - Schweißverfahrensprüfung - Teil
d'un mode opératoire de soudage - Partie 14: Soudage 14: Laserstrahl-Lichtbogen-Hybridschweißen von Stählen,
hybride laser-arc des aciers, du nickel et des alliages de Nickel und dessen Legierungen (ISO 15614-14:2013)
nickel (ISO 15614-14:2013)
This European Standard was approved by CEN on 14 March 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15614-14:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 15614-14:2013) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes”
the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2013, and conflicting national standards shall be withdrawn
at the latest by December 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15614-14:2013 has been approved by CEN as EN ISO 15614-14:2013 without any
modification.
INTERNATIONAL ISO
STANDARD 15614-14
First edition
2013-06-15
Specification and qualification of
welding procedures for metallic
materials — Welding procedure test —
Part 14:
Laser-arc hybrid welding of steels,
nickel and nickel alloys
Descriptif et qualification d’un mode opératoire de soudage pour
les matériaux métalliques — Épreuve de qualification d’un mode
opératoire de soudage —
Partie 14: Soudage hybride laser-arc des aciers, du nickel et des
alliages de nickel
Reference number
ISO 15614-14:2013(E)
©
ISO 2013
ISO 15614-14:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO 15614-14:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope .1
2 Normative references .1
3 Terms and definitions . 2
4 Preliminary welding procedure specification . 2
5 Welding procedure test . 3
6 Test piece . 3
6.1 General . 3
6.2 Shape and dimensions of test pieces . 3
6.3 Welding of test pieces . 4
7 Examination and testing .8
7.1 Extent of examination and testing . 8
7.2 Location and taking of test specimens . 9
7.3 Non-destructive testing .14
7.4 Destructive testing .14
7.5 Quality levels.16
7.6 Re-testing .17
8 Range of qualification .17
8.1 General .17
8.2 Related to the manufacturer .17
8.3 Related to the parent material .17
8.4 Related to welding process .21
8.5 Related to welding position .21
8.6 Related to type of joint or weld.21
8.7 Related to number of layers .21
8.8 Related to filler material .21
8.9 Related to type of current .21
8.10 Related to preheating and interpass temperature .21
8.11 Related to post-weld heat treatment .21
8.12 Nominal heat input .22
8.13 Duration of validity .22
9 Welding procedure qualification record (WPQR) .22
Annex A (informative) Welding procedure qualification record template (WPQR) .23
Bibliography .24
ISO 15614-14:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
...