iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 455-3:2015

(Main)

Medical gloves for single use - Part 3: Requirements and testing for biological evaluation

Medical gloves for single use - Part 3: Requirements and testing for biological evaluation

This part of EN 455 specifies requirements for the evaluation of biological safety for medical gloves for single use. It gives requirements for labelling and the disclosure of information relevant to the test methods used.

Medizinische Handschuhe zum einmaligen Gebrauch - Teil 3: Anforderungen und Prüfung für die biologische Bewertung

Dieser Teil von EN 455 legt Anforderungen für die Bewertung der biologischen Sicherheit von medizinischen Einmalhandschuhen fest. Er enthält Anforderungen für die Kennzeichnung und die Angabe von Informationen über die angewendeten Prüfmethoden.

Gants médicaux non réutilisables - Partie 3 : Exigences et essais pour évaluation biologique

La présente partie de l’EN 455 spécifie les exigences permettant d’évaluer la sécurité biologique des gants médicaux à usage unique. Elle mentionne les exigences d’étiquetage des gants et de diffusion des informations concernant les méthodes d’essai utilisées.

Medicinske rokavice za enkratno uporabo - 3. del: Zahteve in preskušanje za biološko ovrednotenje

General Information

Status
Withdrawn
Publication Date
31-Mar-2015
Withdrawal Date
28-Nov-2023
ICS
11.140 - Hospital equipment
Technical Committee
CEN/TC 205 - Non-active medical devices
Drafting Committee
CEN/TC 205/WG 3 - Medical gloves
Current Stage
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
SIST EN 455-3:2015 - Medical gloves for single use - Part 3: Requirements and testing for biological evaluation

Relations

Replaces
EN 455-3:2006 - Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
Effective Date
08-Apr-2015
Replaced By
EN 455-3:2023 - Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
Effective Date
18-Dec-2019
Amended By
EN 455-3:2015/prA1 - Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
Effective Date
18-May-2016

Buy Standard

EN 455-3:2015EN 455-3:2015
PreviousNext
Standard
EN 455-3:2015
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Medicinske rokavice za enkratno uporabo - 3. del: Zahteve in preskušanje za biološko ovrednotenjeMedizinische Handschuhe zum einmaligen Gebrauch - Teil 3: Anforderungen und Prüfung für die biologische BewertungGants médicaux non réutilisables - Partie 3 : Exigences et essais pour évaluation biologiqueMedical gloves for single use - Part 3: Requirements and testing for biological evaluation11.140Oprema bolnišnicHospital equipmentICS:Ta slovenski standard je istoveten z:EN 455-3:2015SIST EN 455-3:2015en,fr,de01-junij-2015SIST EN 455-3:2015SLOVENSKI
STANDARDSIST EN 455-3:20071DGRPHãþD



SIST EN 455-3:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 455-3
April 2015 ICS 11.140 Supersedes EN 455-3:2006English Version
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
Gants médicaux non réutilisables - Partie 3 : Exigences et essais pour évaluation biologique
Medizinische Handschuhe zum einmaligen Gebrauch - Teil 3: Anforderungen und Prüfung für die biologische Bewertung This European Standard was approved by CEN on 24 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 455-3:2015 ESIST EN 455-3:2015



EN 455-3:2015 (E) 2 Contents Page
Foreword .3 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .6 4 Requirements .7 4.1 General .7 4.2 Chemicals .7 4.3 Endotoxins .8 4.4 Powder-free gloves .8 4.5 Proteins, leachable .8 4.6 Labelling .8 5 Test methods .9 5.1 Endotoxins .9 5.2 Powder .9 5.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 455-3:2023(Main)
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
SIST EN 455-3:2024

This part of EN 455 specifies requirements for the evaluation of biological safety for medical gloves for single use. It gives requirements for labelling and the disclosure of information relevant to the test methods used.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 455-1:2020+A1:2022(Main)
Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
SIST EN 455-1:2020+A1:2022

This document specifies requirements and gives the test method for medical gloves for single use in order to determine freedom from holes.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14683:2019+AC:2019(Main)
Medical face masks - Requirements and test methods
SIST EN 14683:2019+AC:2019

This document specifies construction, design, performance requirements and test methods for medical face masks intended to limit the transmission of infective agents from staff to patients during surgical procedures and other medical settings with similar requirements. A medical face mask with an appropriate microbial barrier can also be effective in reducing the emission of infective agents from the nose and mouth of an asymptomatic carrier or a patient with clinical symptoms.
This European Standard is not applicable to masks intended exclusively for the personal protection of staff.
NOTE 1   Standards for masks for use as respiratory personal protective equipment are available.
NOTE 2   Annex A provides information for the users of medical face masks.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13795-2:2019(Main)
Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits
SIST EN 13795-2:2019

This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characteristics of single-use and reusable clean air suits used as medical devices for clinical staff, intended to prevent the transmission of infective agents between clinical staff and patients during surgical and other invasive procedures. This European Standard specifies test methods for evaluating the identified characteristics of clean air suits and sets performance requirements for these products.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13795-1:2019(Main)
Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns
SIST EN 13795-1:2019

This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characteristics of single-use and reusable surgical gowns and surgical drapes used as medical devices for patients, clinical staff and equipment, intended to prevent the transmission of infective agents between clinical staff and patients during surgical and other invasive procedures. This European Standard specifies test methods for evaluating the identified characteristics of surgical drapes and gowns and sets performance requirements for these products.
EN 13795-1 does not cover requirements for resistance to penetration by laser radiation of products. Suitable test methods for resistance to penetration by laser radiation, together with an appropriate classification system, are given in EN ISO 11810.
EN 13795-1 does not cover requirements for incise drapes or films.
EN 13795-1 does not cover requirements for antimicrobial treatments for surgical gowns and drapes. Antimicrobial treatment may cause environmental risks such as resistance and pollution. However, antimicrobial treated surgical gowns and drapes fall under the scope of this standard with respect to their use as surgical gowns and drapes.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16953:2017(Main)
Medical gloves for single use - Guidance for selection
SIST-TP CEN/TR 16953:2018

This Technical Report provides information for those choosing or using sterile and non-sterile gloves for medical applications based on a risk assessment. It deals with gloves worn primarily for the protection of the patient and glove user from biological cross contamination.
NOTE   Gloves worn specifically for the protection of the glove user from e.g. chemical and biological hazards are covered by the EU-Directive on Personal Protective Equipment (PPE) and the related standards e.g. EN 16523-1, EN 374-2, EN 374-4, EN ISO 374-1 and EN ISO 374-5.
This document describes the rationale behind the requirements of the EN 455 series and explores the possible trade-offs in glove selection between the various factors which affect glove, physical properties, biocompatibility, comfort and sensitivity. The strengths and weaknesses of various alternative glove materials and the potential biological hazards presented by their use are also explored.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 455-2:2015(Main)
Medical gloves for single use - Part 2: Requirements and testing for physical properties
SIST EN 455-2:2015

This European Standard specifies requirements and gives test methods for physical properties of single-use medical gloves (i.e. surgical gloves and examination/procedure gloves) in order to ensure that they provide and maintain in use an adequate level of protection from cross contamination for both patient and user.
This European Standard does not specify the size of a lot. Attention is drawn to the difficulties that can be associated with the distribution and control of very large lots. The recommended maximum individual lot size for production is 500 000.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 455-4:2009(Main)
Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
SIST EN 455-4:2009

for labelling and the disclosure of information relevant to the test methods used. This European Standard applies to existing, new and significantly changed designs. Existing designs that do not currently have ageing data available should generate that data within a reasonable period of time. This European Standard does not specify the size of a lot. Attention is drawn to the difficulties that can be associated with the distribution and control of very large lots. The recommended maximum individual lot size for production is 500 000.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21171:2006(Main)
Medical gloves - Determination of removable surface powder (ISO 21171:2006)
SIST EN ISO 21171:2006

ISO 21171:2006 specifies methods for the determination of readily removable powder on the surface of gloves for medical use. Three methods are specified: method A for powdered gloves and methods B and C for powder-free gloves. This International Standard does not address safety issues that may be associated with the presence of powder on gloves nor does it prescribe limits on the amounts that may be present. The applicability of this International Standard to medical gloves not made from rubber has not been established.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22612:2005(Main)
Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005)
SIST EN ISO 22612:2005

ISO 22612:2005 specifies a test method for assessing the resistance to penetration through barrier materials of bacteria-carrying particles.
Due to its complexity, this ISO 22612:2005 cannot be considered as a useful method for routine quality control but may suit the needs when a material is assessed for compliance with the requirements of current regulations such as EU Directive 93/42/EEC.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day